[Sun May 27 09:42:30 2012] Detection parameters:
  Position = (302.0, 284.1) = 18 2 25.95 -23 2 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 378.3 +/- 24.1
  Background counts = 20.8
  Rate = 0.09 +/- 0.006

[Sun May 27 09:42:30 2012] Off-axis axis estimate = 1.07'
[Sun May 27 09:43:49 2012] Using EEF radius (= 6.96 ")to estimate initial spatial extent for simple fitting
[Sun May 27 09:43:49 2012] Initial guess for spatial extent in simple fitting = 6.96"
[Sun May 27 09:43:49 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.906
[Sun May 27 09:43:49 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.96"
[Sun May 27 10:01:37 2012] fullrun_pn_xmm0135742701_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 27 10:01:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0135742701_pi300-10000_cl_pass0_src1.csv
[Sun May 27 10:01:37 2012] fullrun_pn_xmm0135742701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 27 10:01:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0135742701_pi300-10000_cl_pass0_src1.csv
[Sun May 27 10:01:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0135742701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0135742701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 10:01:37 2012] fullrun_pn_xmm0135742701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 27 10:01:37 2012] fullrun_pn_xmm0135742701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 27 10:01:37 2012] Fit fullrun_pn_xmm0135742701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 27 11:08:45 2012] Spatial fit model total counts = 490.234000, observed total counts = 539.000000
[Sun May 27 11:08:45 2012] Offset between fit and detection position for source 1 = 0.117276 pixels
[Sun May 27 11:08:45 2012] 506.275000 total counts/ 290.552000 bgd. counts: snr = 12.655652
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.117276 pixels
  Position = (301.8, 284.1) = 18 2 25.99 -23 2 27.6
  Extent = 5.1 (4.4-5.6)", rotation angle = 0
  Source counts = 215.7 +/- 22.5
  Background counts = 290.6
  Rate = 0.06 +/- 0.006
[Sun May 27 11:08:45 2012] Vigneting correction estimate = 1.000000
[Sun May 27 11:08:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 11:08:45 2012] Assessing source extent using major axis lower bound
[Sun May 27 11:08:45 2012] Source does appear to be extended
[Sun May 27 11:08:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 11:08:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 11:08:58 2012] Initial guess for spatial extent in simple fitting = 5.13"
[Sun May 27 11:08:58 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.419
[Sun May 27 11:08:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.13"
[Sun May 27 11:32:50 2012] fullrun_pn_xmm0135742701_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 27 11:32:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0135742701_pi300-10000_cl_pass1_src1.csv
[Sun May 27 11:32:50 2012] fullrun_pn_xmm0135742701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 27 11:32:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0135742701_pi300-10000_cl_pass1_src1.csv
[Sun May 27 11:32:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0135742701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0135742701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 11:32:50 2012] fullrun_pn_xmm0135742701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 27 11:32:50 2012] fullrun_pn_xmm0135742701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 27 11:32:50 2012] Fit fullrun_pn_xmm0135742701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May 27 12:20:00 2012] Spatial fit model total counts = 490.091000, observed total counts = 539.000000
[Sun May 27 12:20:00 2012] Offset between fit and detection position for source 1 = 0.000738 pixels
[Sun May 27 12:20:00 2012] 506.052000 total counts/ 289.057000 bgd. counts: snr = 12.763153
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000738 pixels
  Position = (301.8, 284.1) = 18 2 25.99 -23 2 27.5
  Extent = 5.2 (4.4-5.8)", rotation angle = 0
  Source counts = 217.0 +/- 22.5
  Background counts = 289.1
  Rate = 0.06 +/- 0.006
[Sun May 27 12:20:00 2012] Vigneting correction estimate = 1.000000
[Sun May 27 12:20:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 12:20:00 2012] Assessing source extent using major axis lower bound
[Sun May 27 12:20:00 2012] Source does appear to be extended
[Sun May 27 12:20:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 12:20:10 2012] XMMSAS src. selection expression = ellipse(26211.591820, 24666.512000, 311.422209, 311.422209, 0.000000, X, Y)
[Sun May 27 12:20:10 2012] Writing source region out to fullrun_pn_xmm0135742701_pi300-10000_pass1_cl_src1_src.reg
[Sun May 27 12:20:10 2012] Extracting stamp from image fullrun_pn_xmm0135742701_pi300-10000_cl_sm2.00.img.gz, (284, 266) - (320, 302)
[Sun May 27 12:20:10 2012] XMMSAS bgd. selection expression = annulus(26211.591820, 24666.512000, 519.037015, 1038.074030, X, Y) && !ellipse(26870.706635, 25430.127563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27353.446716, 26420.910156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24673.662400, 24509.806400, 650.000819, 650.000819, 0.000000, X, Y) && !ellipse(27566.486267, 23777.703705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24983.036400, 25733.500000, 726.124821, 207.464806, 65.486778, X, Y)
[Sun May 27 12:20:10 2012] Writing fullrun_pn_xmm0135742701_pi300-10000_pass1_cl_src1.gif
[Sun May 27 12:20:15 2012] Mean detx,y = (-1352.51, 228.15) 
[Sun May 27 12:20:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 12:20:30 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 12:20:33 2012] Setting source spectrum file to fullrun_pn_xmm0135742701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 27 12:20:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0135742701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun May 27 12:53:08 2012] Updating aperture counts using extracted products
[Sun May 27 12:53:08 2012] Error reading totcts from fullrun_pn_xmm0135742701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 27 12:53:08 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 12:53:08 2012] Using photon index=1.80, rate=0.0569, arf fullrun_pn_xmm0135742701_pi300-10000_pass1_cl_src1.arf
[Sun May 27 12:53:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 12:53:08 2012] Updating source flux to 2e-13
[Sun May 27 12:53:41 2012] Reading fit data from xmm0135742701/analysis//spectral/fullrun_pn_xmm0135742701_pi300-10000_pass1_cl_src1_pl.csv
[Sun May 27 12:53:41 2012] Spectral fit parameter nH value = 2.17219e+21
[Sun May 27 12:53:41 2012] Spectral fit parameter PhoIndex value = 1.96226
[Sun May 27 12:53:41 2012] Failed to get F(0.3-8.0) from xmm0135742701/analysis//spectral/fullrun_pn_xmm0135742701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun May 27 12:53:41 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 12:53:41 2012] Using Nh = 2.2e+21, photon index=1.96, rate=0.0569, arf fullrun_pn_xmm0135742701_pi300-10000_pass1_cl_src1.arf
[Sun May 27 12:53:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 12:53:41 2012] Updating source flux to 2.6e-13