[Sun May 27 09:43:08 2012] Detection parameters:
  Position = (309.9, 292.9) = 18 2 23.43 -23 1 49.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 401.4 +/- 24.4
  Background counts = 7.5
  Rate = 0.06 +/- 0.004

[Sun May 27 09:43:08 2012] Off-axis axis estimate = 0.93'
[Sun May 27 10:27:34 2012] Using EEF radius (= 6.89 ")to estimate initial spatial extent for simple fitting
[Sun May 27 10:27:34 2012] Initial guess for spatial extent in simple fitting = 6.89"
[Sun May 27 10:27:34 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.921
[Sun May 27 10:27:34 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.89"
[Sun May 27 11:08:41 2012] fullrun_mos2_xmm0135742701_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 27 11:08:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135742701_pi300-10000_cl_pass0_src1.csv
[Sun May 27 11:08:41 2012] fullrun_mos2_xmm0135742701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 27 11:08:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135742701_pi300-10000_cl_pass0_src1.csv
[Sun May 27 11:08:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0135742701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0135742701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 11:08:41 2012] fullrun_mos2_xmm0135742701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 27 11:08:41 2012] fullrun_mos2_xmm0135742701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 27 11:08:41 2012] Fit fullrun_mos2_xmm0135742701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 27 11:08:52 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Sun May 27 11:08:52 2012] Spatial fit model total counts = 357.186000, observed total counts = 360.000000
[Sun May 27 11:08:52 2012] Offset between fit and detection position for source 2 = 2.136718 pixels
[Sun May 27 11:08:52 2012] Warning, changing simple spatial fit ID from 1 to 2
[Sun May 27 11:08:52 2012] 374.015400 total counts/ 362.495000 bgd. counts: snr = 0.605085
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.136718 pixels
  Position = (308.4, 291.4) = 18 2 23.92 -23 1 55.7
  Extent = 3.5 (1.7-7.1)", rotation angle = 0
  Source counts = 11.5 +/- 19.3
  Background counts = 362.5
  Rate = 0.002 +/- 0.003
  Deleting source due to low Poisson probability