[Sun May 27 09:42:47 2012] Detection parameters:
  Position = (310.1, 292.8) = 18 2 23.38 -23 1 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 426.4 +/- 25.5
  Background counts = 8.4
  Rate = 0.07 +/- 0.004

[Sun May 27 09:42:47 2012] Off-axis axis estimate = 0.94'
[Sun May 27 10:01:38 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Sun May 27 10:01:38 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Sun May 27 10:01:38 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.919
[Sun May 27 10:01:38 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.90"
[Sun May 27 10:27:33 2012] fullrun_mos1_xmm0135742701_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 27 10:27:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135742701_pi300-10000_cl_pass0_src1.csv
[Sun May 27 10:27:33 2012] fullrun_mos1_xmm0135742701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 27 10:27:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135742701_pi300-10000_cl_pass0_src1.csv
[Sun May 27 10:27:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135742701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135742701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 10:27:33 2012] fullrun_mos1_xmm0135742701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 27 10:27:33 2012] fullrun_mos1_xmm0135742701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 27 10:27:33 2012] Fit fullrun_mos1_xmm0135742701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 27 11:08:47 2012] Spatial fit model total counts = 520.304000, observed total counts = 518.000000
[Sun May 27 11:08:47 2012] Offset between fit and detection position for source 2 = 0.241079 pixels
[Sun May 27 11:08:47 2012] 511.564000 total counts/ 217.344000 bgd. counts: snr = 19.957143
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.241079 pixels
  Position = (310.1, 292.5) = 18 2 23.39 -23 1 50.7
  Extent = 6.7 (6.1-7.3)", rotation angle = 0
  Source counts = 294.2 +/- 22.6
  Background counts = 217.3
  Rate = 0.05 +/- 0.004
[Sun May 27 11:08:47 2012] Vigneting correction estimate = 1.000000
[Sun May 27 11:08:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 11:08:47 2012] Assessing source extent using major axis lower bound
[Sun May 27 11:08:47 2012] Source does appear to be extended
[Sun May 27 11:08:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 11:32:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 11:32:50 2012] Initial guess for spatial extent in simple fitting = 6.69"
[Sun May 27 11:32:50 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.962
[Sun May 27 11:32:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.69"
[Sun May 27 11:53:59 2012] fullrun_mos1_xmm0135742701_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 27 11:53:59 2012] fullrun_mos1_xmm0135742701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 27 11:53:59 2012] Fit fullrun_mos1_xmm0135742701_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun May 27 11:53:59 2012] fullrun_mos1_xmm0135742701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 27 11:53:59 2012] fullrun_mos1_xmm0135742701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 27 11:53:59 2012] Fit fullrun_mos1_xmm0135742701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May 27 12:20:02 2012] Spatial fit model total counts = 534.032000, observed total counts = 537.000000
[Sun May 27 12:20:02 2012] Offset between fit and detection position for source 2 = 0.049974 pixels
[Sun May 27 12:20:02 2012] 524.136000 total counts/ 238.992000 bgd. counts: snr = 18.444741
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.049974 pixels
  Position = (310.1, 292.5) = 18 2 23.38 -23 1 50.8
  Extent = 7.5" x 5.4", rotation angle = 71
  Source counts = 285.1 +/- 22.9
  Background counts = 239.0
  Rate = 0.04 +/- 0.004
[Sun May 27 12:20:02 2012] Vigneting correction estimate = 1.000000
[Sun May 27 12:20:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 12:20:02 2012] Assessing source extent using major
[Sun May 27 12:20:02 2012] Source does appear to be extended
[Sun May 27 12:20:02 2012] Computing asymmetry using major and minor axis, asym = 1.39
[Sun May 27 12:33:05 2012] XMMSAS src. selection expression = ellipse(26931.835340, 25401.332600, 452.257213, 326.067609, 70.558300, X, Y)
[Sun May 27 12:33:05 2012] Writing source region out to fullrun_mos1_xmm0135742701_pi300-10000_pass1_cl_src2_src.reg
[Sun May 27 12:33:05 2012] Extracting stamp from image fullrun_mos1_xmm0135742701_pi300-10000_cl_sm2.00.img.gz, (284, 267) - (336, 319)
[Sun May 27 12:33:05 2012] XMMSAS bgd. selection expression = annulus(26931.835340, 25401.332600, 753.762022, 1507.524043, X, Y) && !ellipse(26196.237400, 24666.333200, 356.092810, 356.092810, 0.000000, X, Y) && !ellipse(27349.596120, 26447.007400, 427.380012, 427.380012, 0.000000, X, Y) && !ellipse(27554.214600, 23681.328400, 490.721614, 490.721614, 0.000000, X, Y) && !ellipse(28331.981659, 23098.762268, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 12:33:05 2012] Writing fullrun_mos1_xmm0135742701_pi300-10000_pass1_cl_src2.gif
[Sun May 27 12:33:06 2012] Mean detx,y = (-892.93, -2382.65) 
[Sun May 27 12:33:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 12:33:13 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 12:33:14 2012] Setting source spectrum file to fullrun_mos1_xmm0135742701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun May 27 12:33:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0135742701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun May 27 12:53:08 2012] Updating aperture counts using extracted products
[Sun May 27 12:53:08 2012] Error reading totcts from fullrun_mos1_xmm0135742701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun May 27 12:53:08 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 12:53:08 2012] Using photon index=1.80, rate=0.0448, arf fullrun_mos1_xmm0135742701_pi300-10000_pass1_cl_src2.arf
[Sun May 27 12:53:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 12:53:08 2012] Updating source flux to 5.5e-13
[Sun May 27 12:53:23 2012] Reading fit data from xmm0135742701/analysis//spectral/fullrun_mos1_xmm0135742701_pi300-10000_pass1_cl_src2_pl.csv
[Sun May 27 12:53:23 2012] Spectral fit parameter nH value = 1.52861e+21
[Sun May 27 12:53:23 2012] Spectral fit parameter PhoIndex value = 2.74515
[Sun May 27 12:53:23 2012] Failed to get F(0.3-8.0) from xmm0135742701/analysis//spectral/fullrun_mos1_xmm0135742701_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun May 27 12:53:23 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 12:53:23 2012] Using Nh = 1.5e+21, photon index=2.75, rate=0.0448, arf fullrun_mos1_xmm0135742701_pi300-10000_pass1_cl_src2.arf
[Sun May 27 12:53:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 12:53:23 2012] Updating source flux to 4.3e-13