[Fri Jul 20 21:04:47 2012] Detection parameters:
  Position = (300.7, 305.9) = 18 1 43.39 -23 18 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.1 +/- 14.2
  Background counts = 43.1
  Rate = 0.02 +/- 0.003

[Fri Jul 20 21:04:47 2012] Off-axis axis estimate = 0.57'
[Fri Jul 20 21:06:24 2012] Using EEF radius (= 6.71 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 21:06:24 2012] Initial guess for spatial extent in simple fitting = 6.71"
[Fri Jul 20 21:06:24 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.958
[Fri Jul 20 21:06:24 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 6.71"
[Fri Jul 20 22:35:34 2012] fullrun_pn_xmm0135742401_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jul 20 22:35:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0135742401_pi300-10000_cl_pass0_src13.csv
[Fri Jul 20 22:35:34 2012] fullrun_pn_xmm0135742401_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jul 20 22:35:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0135742401_pi300-10000_cl_pass0_src13.csv
[Fri Jul 20 22:35:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0135742401_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0135742401_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 22:35:35 2012] fullrun_pn_xmm0135742401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jul 20 22:35:35 2012] fullrun_pn_xmm0135742401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jul 20 22:35:35 2012] Fit fullrun_pn_xmm0135742401_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sat Jul 21 00:54:57 2012] Warning, spatial fit 13 centroid is now closest to src. 11
[Sat Jul 21 00:54:57 2012] Source 13 is offset by 3.075897 and 5.517991 pixels which is larger than
2 X fitted extent = 5.918253 x 0.767347, not incorporating fit results
[Sat Jul 21 00:54:57 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 00:54:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 00:54:57 2012] Assessing source extent using major
[Sat Jul 21 00:54:57 2012] Source does appear to be extended
[Sat Jul 21 00:54:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 00:54:57 2012] Source is confused with source 11
[Sat Jul 21 00:55:14 2012] Using EEF radius (= 6.71 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 00:55:14 2012] Initial guess for spatial extent in simple fitting = 6.71"
[Sat Jul 21 00:55:14 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.958
[Sat Jul 21 00:55:14 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 6.71"
[Sat Jul 21 02:08:45 2012] fullrun_pn_xmm0135742401_pi300-10000_cl_pass1_src10.ximg exists
[Sat Jul 21 02:08:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0135742401_pi300-10000_cl_pass1_src10.csv
[Sat Jul 21 02:08:45 2012] fullrun_pn_xmm0135742401_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Jul 21 02:08:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0135742401_pi300-10000_cl_pass1_src10.csv
[Sat Jul 21 02:08:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0135742401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0135742401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 02:08:45 2012] fullrun_pn_xmm0135742401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Jul 21 02:08:45 2012] fullrun_pn_xmm0135742401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Jul 21 02:08:45 2012] Fit fullrun_pn_xmm0135742401_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Jul 21 04:22:50 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 15.254793 pixels away
[Sat Jul 21 04:22:50 2012] Warning, spatial fit 10 centroid is now closest to src. 11
[Sat Jul 21 04:22:50 2012] Source 13 is offset by -9.152517 and -0.597457 pixels which is larger than
2 X fitted extent = 1.495471 x 1.495471, not incorporating fit results
[Sat Jul 21 04:22:50 2012] Source 13 is offset by 3.496793 and 6.042635 pixels which is larger than
2 X fitted extent = 0.767480 x 0.767480, not incorporating fit results
[Sat Jul 21 04:22:50 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 04:22:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 04:22:50 2012] Assessing source extent using major
[Sat Jul 21 04:22:50 2012] Source does appear to be extended
[Sat Jul 21 04:22:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 04:23:05 2012] XMMSAS src. selection expression = ellipse(26113.632996, 26568.803253, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 21 04:23:05 2012] Writing source region out to fullrun_pn_xmm0135742401_pi300-10000_pass1_cl_src13_src.reg
[Sat Jul 21 04:23:05 2012] Extracting stamp from image fullrun_pn_xmm0135742401_pi300-10000_cl_sm2.00.img.gz, (263, 268) - (338, 343)
[Sat Jul 21 04:23:05 2012] XMMSAS bgd. selection expression = annulus(26113.632996, 26568.803253, 1087.500000, 2175.000000, X, Y) && !ellipse(25094.980560, 29262.035767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25362.684509, 28488.713348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24766.653000, 28694.088400, 673.412019, 673.412019, 0.000000, X, Y) && !ellipse(25399.353200, 27822.175600, 958.304028, 958.304028, 0.000000, X, Y) && !ellipse(25008.992126, 27371.161072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26455.350000, 27177.872000, 1074.088031, 1074.088031, 0.000000, X, Y) && !ellipse(24824.295013, 26479.511963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25940.634600, 25976.995800, 1039.040030, 1039.040030, 0.000000, X, Y) && !ellipse(24894.464800, 25874.518000, 632.500818, 632.500818, 0.000000, X, Y) && !ellipse(25463.634033, 25530.487671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26503.156000, 24944.896000, 1077.312031, 1077.312031, 0.000000, X, Y) && !ellipse(24575.358000, 25375.384000, 2314.840067, 1331.640038, 129.650892, X, Y) && !ellipse(25194.337067, 25097.386017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24576.105530, 24506.089752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24808.152435, 24057.719025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24129.690200, 24842.024000, 1187.368034, 1187.368034, 0.000000, X, Y) && !ellipse(24328.200134, 23786.271484, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 21 04:23:05 2012] Writing fullrun_pn_xmm0135742401_pi300-10000_pass1_cl_src13.gif
[Sat Jul 21 04:26:57 2012] Mean detx,y = (-1175.12, 2110.58) 
[Sat Jul 21 04:26:58 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 04:27:09 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 04:27:10 2012] Setting source spectrum file to fullrun_pn_xmm0135742401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jul 21 04:27:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0135742401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Jul 21 04:41:01 2012] Not generating rmf since there are only 65 counts
[Sat Jul 21 04:41:01 2012] rmf not generated due to insufficient counts
[Sat Jul 21 05:45:03 2012] Updating aperture counts using extracted products
[Sat Jul 21 05:45:03 2012] Error reading totcts from fullrun_pn_xmm0135742401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jul 21 05:45:03 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 05:45:03 2012] Using photon index=1.80, rate=0.0159, arf fullrun_pn_xmm0135742401_pi300-10000_pass1_cl_src13.arf
[Sat Jul 21 05:45:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 05:45:03 2012] Updating source flux to 4.8e-14
[Sat Jul 21 05:45:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting