[Fri Jul 20 21:05:29 2012] Detection parameters:
  Position = (303.2, 341.5) = 18 1 42.61 -23 15 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.5 +/- 11.1
  Background counts = 21.8
  Rate = 0.007 +/- 0.002

[Fri Jul 20 21:05:29 2012] Off-axis axis estimate = 3.14'
[Fri Jul 20 23:57:43 2012] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 23:57:43 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Fri Jul 20 23:57:43 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.143
[Fri Jul 20 23:57:43 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 8.00"
[Sat Jul 21 00:54:50 2012] fullrun_mos2_xmm0135742401_pi300-10000_cl_pass0_src16.ximg exists
[Sat Jul 21 00:54:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135742401_pi300-10000_cl_pass0_src16.csv
[Sat Jul 21 00:54:51 2012] fullrun_mos2_xmm0135742401_pi300-10000_cl_pass0_src16_1.ximg exists
[Sat Jul 21 00:54:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135742401_pi300-10000_cl_pass0_src16.csv
[Sat Jul 21 00:54:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0135742401_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0135742401_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 00:54:51 2012] fullrun_mos2_xmm0135742401_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sat Jul 21 00:54:51 2012] fullrun_mos2_xmm0135742401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sat Jul 21 00:54:51 2012] Fit fullrun_mos2_xmm0135742401_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sat Jul 21 00:55:06 2012] Source 3 is offset by 7.527672 and 5.118834 pixels which is larger than
2 X fitted extent = 5.046943 x 5.046943, not incorporating fit results
[Sat Jul 21 00:55:06 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 00:55:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 00:55:06 2012] Assessing source extent using major
[Sat Jul 21 00:55:06 2012] Source does appear to be extended
[Sat Jul 21 00:55:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 00:55:06 2012] Source is confused with source 1
[Sat Jul 21 03:30:45 2012] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 03:30:45 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Sat Jul 21 03:30:45 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.143
[Sat Jul 21 03:30:45 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.00"
[Sat Jul 21 04:22:43 2012] fullrun_mos2_xmm0135742401_pi300-10000_cl_pass1_src13.ximg exists
[Sat Jul 21 04:22:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135742401_pi300-10000_cl_pass1_src13.csv
[Sat Jul 21 04:22:43 2012] fullrun_mos2_xmm0135742401_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat Jul 21 04:22:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135742401_pi300-10000_cl_pass1_src13.csv
[Sat Jul 21 04:22:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0135742401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0135742401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 04:22:43 2012] fullrun_mos2_xmm0135742401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat Jul 21 04:22:43 2012] fullrun_mos2_xmm0135742401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Jul 21 04:22:43 2012] Fit fullrun_mos2_xmm0135742401_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Jul 21 04:22:58 2012] Spatial fit model total counts = 719.852000, observed total counts = 707.000000
[Sat Jul 21 04:22:58 2012] Offset between fit and detection position for source 3 = 2.214552 pixels
[Sat Jul 21 04:22:58 2012] Warning, changing simple spatial fit ID from 13 to 4
[Sat Jul 21 04:22:58 2012] 688.674022 total counts/ 688.674000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.214552 pixels
  Position = (303.3, 339.3) = 18 1 42.58 -23 15 50.6
  Extent = 28.9 (3.6-54.1)", rotation angle = 0
  Source counts = 0.0 +/- 26.2
  Background counts = 688.7
  Rate = 4e-09 +/- 0.005
  Deleting source due to low Poisson probability