[Fri Jul 20 21:05:29 2012] Detection parameters:
  Position = (286.7, 300.0) = 18 1 47.82 -23 18 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.9 +/- 12.0
  Background counts = 18.1
  Rate = 0.009 +/- 0.002

[Fri Jul 20 21:05:29 2012] Off-axis axis estimate = 0.86'
[Fri Jul 20 23:57:43 2012] Using EEF radius (= 6.86 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 23:57:43 2012] Initial guess for spatial extent in simple fitting = 6.86"
[Fri Jul 20 23:57:43 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.928
[Fri Jul 20 23:57:43 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 6.86"
[Sat Jul 21 00:54:50 2012] fullrun_mos2_xmm0135742401_pi300-10000_cl_pass0_src8.ximg exists
[Sat Jul 21 00:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135742401_pi300-10000_cl_pass0_src8.csv
[Sat Jul 21 00:54:50 2012] fullrun_mos2_xmm0135742401_pi300-10000_cl_pass0_src8_1.ximg exists
[Sat Jul 21 00:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135742401_pi300-10000_cl_pass0_src8.csv
[Sat Jul 21 00:54:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0135742401_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0135742401_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 00:54:51 2012] fullrun_mos2_xmm0135742401_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sat Jul 21 00:54:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135742401_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sat Jul 21 00:54:51 2012] fullrun_mos2_xmm0135742401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Jul 21 00:54:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135742401_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sat Jul 21 00:54:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0135742401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0135742401_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 00:55:06 2012] Warning, spatial fit 8 centroid is now closest to src. 13
[Sat Jul 21 00:55:06 2012] Spatial fit model total counts = 400.119000, observed total counts = 401.000000
[Sat Jul 21 00:55:06 2012] Offset between fit and detection position for source 15 = 1.208721 pixels
[Sat Jul 21 00:55:06 2012] Warning, changing simple spatial fit ID from 8 to 12
[Sat Jul 21 00:55:06 2012] 382.604500 total counts/ 371.758000 bgd. counts: snr = 0.562548
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 1.208721 pixels
  Position = (286.9, 301.2) = 18 1 47.75 -23 18 36.5
  Extent = 3.1 (1.7-6.0)", rotation angle = 0
  Source counts = 10.8 +/- 19.6
  Background counts = 371.8
  Rate = 0.002 +/- 0.004
  Deleting source due to low Poisson probability