[Fri Jul 20 21:05:09 2012] Detection parameters:
  Position = (282.9, 332.9) = 18 1 49.03 -23 16 22.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.5 +/- 11.5
  Background counts = 15.5
  Rate = 0.009 +/- 0.002

[Fri Jul 20 21:05:10 2012] Off-axis axis estimate = 2.74'
[Fri Jul 20 22:35:35 2012] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 22:35:35 2012] Initial guess for spatial extent in simple fitting = 7.80"
[Fri Jul 20 22:35:35 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.761
[Fri Jul 20 22:35:35 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.80"
[Fri Jul 20 23:57:42 2012] fullrun_mos1_xmm0135742401_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jul 20 23:57:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135742401_pi300-10000_cl_pass0_src13.csv
[Fri Jul 20 23:57:42 2012] fullrun_mos1_xmm0135742401_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jul 20 23:57:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135742401_pi300-10000_cl_pass0_src13.csv
[Fri Jul 20 23:57:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135742401_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135742401_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 23:57:43 2012] fullrun_mos1_xmm0135742401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jul 20 23:57:43 2012] fullrun_mos1_xmm0135742401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jul 20 23:57:43 2012] Fit fullrun_mos1_xmm0135742401_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sat Jul 21 00:55:02 2012] Spatial fit model total counts = 349.037000, observed total counts = 347.000000
[Sat Jul 21 00:55:02 2012] Offset between fit and detection position for source 6 = 3.142764 pixels
[Sat Jul 21 00:55:02 2012] 345.386500 total counts/ 308.769000 bgd. counts: snr = 2.083876
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 3.142764 pixels
  Position = (279.8, 333.5) = 18 1 50.00 -23 16 15.7
  Extent = 15.6 (15.6-31.2)", rotation angle = 0
  Source counts = 36.6 +/- 18.6
  Background counts = 308.8
  Rate = 0.007 +/- 0.003
[Sat Jul 21 00:55:02 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 00:55:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 00:55:02 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 00:55:02 2012] Source does appear to be extended
[Sat Jul 21 00:55:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 00:55:02 2012] Source is confused with source 5
[Sat Jul 21 02:08:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 21 02:08:45 2012] Initial guess for spatial extent in simple fitting = 15.60"
[Sat Jul 21 02:08:45 2012] source mask rpix=3.6, npix_max = 66, mask sum = 72, frac = 1.078
[Sat Jul 21 02:08:45 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 15.60"
[Sat Jul 21 03:30:44 2012] fullrun_mos1_xmm0135742401_pi300-10000_cl_pass1_src12.ximg exists
[Sat Jul 21 03:30:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135742401_pi300-10000_cl_pass1_src12.csv
[Sat Jul 21 03:30:44 2012] fullrun_mos1_xmm0135742401_pi300-10000_cl_pass1_src12_1.ximg exists
[Sat Jul 21 03:30:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135742401_pi300-10000_cl_pass1_src12.csv
[Sat Jul 21 03:30:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135742401_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135742401_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 03:30:45 2012] fullrun_mos1_xmm0135742401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sat Jul 21 03:30:45 2012] fullrun_mos1_xmm0135742401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Jul 21 03:30:45 2012] Fit fullrun_mos1_xmm0135742401_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Jul 21 04:22:55 2012] Warning, spatial fit 12 centroid is now closest to src. 12
[Sat Jul 21 04:22:55 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 04:22:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 04:22:55 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 04:22:55 2012] Source does appear to be extended
[Sat Jul 21 04:22:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 04:59:09 2012] XMMSAS src. selection expression = ellipse(24291.774000, 28967.339200, 936.018027, 936.018027, 0.000000, X, Y)
[Sat Jul 21 04:59:09 2012] Writing source region out to fullrun_mos1_xmm0135742401_pi300-10000_pass1_cl_src6_src.reg
[Sat Jul 21 04:59:09 2012] Extracting stamp from image fullrun_mos1_xmm0135742401_pi300-10000_cl_sm2.00.img.gz, (226, 280) - (334, 387)
[Sat Jul 21 04:59:09 2012] XMMSAS bgd. selection expression = annulus(24291.774000, 28967.339200, 1560.030045, 3120.060090, X, Y) && !ellipse(25675.057800, 25830.680000, 1038.752030, 1038.752030, 0.000000, X, Y) && !ellipse(25159.240234, 28757.609406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24858.626000, 25660.546000, 1132.096033, 1132.096033, 0.000000, X, Y) && !ellipse(25631.665527, 26393.688141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26859.498200, 29805.550400, 1275.280037, 1275.280037, 0.000000, X, Y) && !ellipse(25113.494080, 25629.305206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24155.572000, 25228.204000, 2264.184065, 2264.184065, 0.000000, X, Y) && !ellipse(25815.700000, 25950.238000, 1054.328030, 1054.328030, 0.000000, X, Y) && !ellipse(25790.308343, 27959.668000, 1193.704034, 1193.704034, 0.000000, X, Y) && !ellipse(25131.994324, 27025.632904, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 21 04:59:09 2012] Writing fullrun_mos1_xmm0135742401_pi300-10000_pass1_cl_src6.gif
[Sat Jul 21 05:00:57 2012] Mean detx,y = (-4409.85, -23.86) 
[Sat Jul 21 05:00:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 05:01:15 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 05:01:15 2012] Setting source spectrum file to fullrun_mos1_xmm0135742401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jul 21 05:01:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0135742401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jul 21 05:09:31 2012] Not generating rmf since there are only 36 counts
[Sat Jul 21 05:09:31 2012] rmf not generated due to insufficient counts
[Sat Jul 21 05:45:04 2012] Updating aperture counts using extracted products
[Sat Jul 21 05:45:04 2012] Error reading totcts from fullrun_mos1_xmm0135742401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jul 21 05:45:04 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 05:45:04 2012] Using photon index=1.80, rate=0.00663, arf fullrun_mos1_xmm0135742401_pi300-10000_pass1_cl_src6.arf
[Sat Jul 21 05:45:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 05:45:04 2012] Updating source flux to 7.1e-14
[Sat Jul 21 05:45:05 2012] Flag c found in src. 6 procflags, skipping spectral fitting
[Sat Jul 21 05:45:05 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting