[Fri Jul 20 21:05:09 2012] Detection parameters:
  Position = (277.6, 287.1) = 18 1 50.67 -23 19 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.7 +/- 11.6
  Background counts = 15.8
  Rate = 0.009 +/- 0.002

[Fri Jul 20 21:05:10 2012] Off-axis axis estimate = 1.72'
[Fri Jul 20 22:35:35 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 22:35:35 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Jul 20 22:35:35 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Fri Jul 20 22:35:35 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 7.29"
[Fri Jul 20 23:57:42 2012] fullrun_mos1_xmm0135742401_pi300-10000_cl_pass0_src16.ximg exists
[Fri Jul 20 23:57:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135742401_pi300-10000_cl_pass0_src16.csv
[Fri Jul 20 23:57:42 2012] fullrun_mos1_xmm0135742401_pi300-10000_cl_pass0_src16_1.ximg exists
[Fri Jul 20 23:57:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135742401_pi300-10000_cl_pass0_src16.csv
[Fri Jul 20 23:57:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135742401_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135742401_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 23:57:43 2012] fullrun_mos1_xmm0135742401_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Fri Jul 20 23:57:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0135742401_pi300-10000_cl_pass0_tfrozen_src16.csv
[Fri Jul 20 23:57:43 2012] fullrun_mos1_xmm0135742401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Jul 20 23:57:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0135742401_pi300-10000_cl_pass0_tfrozen_src16.csv
[Fri Jul 20 23:57:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135742401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135742401_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 00:55:02 2012] Source 22 is offset by 6.648025 and -7.054548 pixels which is larger than
2 X fitted extent = 2.256248 x 2.256248, not incorporating fit results
[Sat Jul 21 00:55:02 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 00:55:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 00:55:02 2012] Assessing source extent using major
[Sat Jul 21 00:55:02 2012] Source does appear to be extended
[Sat Jul 21 00:55:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 00:55:02 2012] Source is confused with source 16
[Sat Jul 21 02:08:45 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 02:08:45 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jul 21 02:08:45 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Sat Jul 21 02:08:45 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 7.29"
[Sat Jul 21 03:30:44 2012] fullrun_mos1_xmm0135742401_pi300-10000_cl_pass1_src15.ximg exists
[Sat Jul 21 03:30:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135742401_pi300-10000_cl_pass1_src15.csv
[Sat Jul 21 03:30:44 2012] fullrun_mos1_xmm0135742401_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Jul 21 03:30:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135742401_pi300-10000_cl_pass1_src15.csv
[Sat Jul 21 03:30:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135742401_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135742401_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 03:30:45 2012] fullrun_mos1_xmm0135742401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Jul 21 03:30:45 2012] fullrun_mos1_xmm0135742401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Jul 21 03:30:45 2012] Fit fullrun_mos1_xmm0135742401_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sat Jul 21 04:22:55 2012] Spatial fit model total counts = 603.629000, observed total counts = 603.000000
[Sat Jul 21 04:22:55 2012] Offset between fit and detection position for source 22 = 3.450740 pixels
[Sat Jul 21 04:22:55 2012] Warning, changing simple spatial fit ID from 15 to 5
[Sat Jul 21 04:22:55 2012] 612.340000 total counts/ 372.306000 bgd. counts: snr = 12.440068
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 3.450740 pixels
  Position = (278.2, 290.5) = 18 1 50.50 -23 19 22.7
  Extent = 28.3 (28.3-28.3)", rotation angle = 0
  Source counts = 240.0 +/- 24.7
  Background counts = 372.3
  Rate = 0.04 +/- 0.004
[Sat Jul 21 04:22:55 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 04:22:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 04:22:55 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 04:22:55 2012] Source does appear to be extended
[Sat Jul 21 04:22:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 04:59:09 2012] XMMSAS src. selection expression = ellipse(24155.572000, 25228.204000, 1698.138049, 1698.138049, 0.000000, X, Y)
[Sat Jul 21 04:59:09 2012] Writing source region out to fullrun_mos1_xmm0135742401_pi300-10000_pass1_cl_src22_src.reg
[Sat Jul 21 04:59:09 2012] Extracting stamp from image fullrun_mos1_xmm0135742401_pi300-10000_cl_sm2.00.img.gz, (181, 193) - (376, 388)
[Sat Jul 21 04:59:09 2012] XMMSAS bgd. selection expression = annulus(24155.572000, 25228.204000, 2830.230081, 5660.460163, X, Y) && !ellipse(25675.057800, 25830.680000, 1038.752030, 1038.752030, 0.000000, X, Y) && !ellipse(25159.240234, 28757.609406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24858.626000, 25660.546000, 1132.096033, 1132.096033, 0.000000, X, Y) && !ellipse(25631.665527, 26393.688141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26859.498200, 29805.550400, 1275.280037, 1275.280037, 0.000000, X, Y) && !ellipse(25113.494080, 25629.305206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24291.774000, 28967.339200, 1248.024036, 1248.024036, 0.000000, X, Y) && !ellipse(23964.322834, 24316.205600, 808.168023, 808.168023, 0.000000, X, Y) && !ellipse(25815.700000, 25950.238000, 1054.328030, 1054.328030, 0.000000, X, Y) && !ellipse(25790.308343, 27959.668000, 1193.704034, 1193.704034, 0.000000, X, Y) && !ellipse(25131.994324, 27025.632904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24610.920929, 24489.756012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25999.976501, 24892.173492, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 21 04:59:09 2012] Writing fullrun_mos1_xmm0135742401_pi300-10000_pass1_cl_src22.gif
[Sat Jul 21 05:01:24 2012] Mean detx,y = (-692.42, 65.52) 
[Sat Jul 21 05:01:25 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 05:01:40 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 05:01:40 2012] Setting source spectrum file to fullrun_mos1_xmm0135742401_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Jul 21 05:01:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0135742401_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sat Jul 21 05:45:04 2012] Updating aperture counts using extracted products
[Sat Jul 21 05:45:04 2012] Error reading totcts from fullrun_mos1_xmm0135742401_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Jul 21 05:45:04 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 05:45:04 2012] Using photon index=1.80, rate=0.0434, arf fullrun_mos1_xmm0135742401_pi300-10000_pass1_cl_src22.arf
[Sat Jul 21 05:45:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 05:45:04 2012] Updating source flux to 3.8e-13
[Sat Jul 21 05:45:05 2012] Flag b found in src. 22 procflags, skipping spectral fitting
[Sat Jul 21 05:45:05 2012] Flag c found in src. 22 procflags, skipping spectral fitting