[Mon Mar 26 13:33:31 2012] Detection parameters:
  Position = (308.0, 274.1) = 1 4 15.68 -72 3 6.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.5 +/- 21.6
  Background counts = 59.2
  Rate = 0.01 +/- 0.002

[Mon Mar 26 13:33:31 2012] Off-axis axis estimate = 1.89'
[Mon Mar 26 13:36:44 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 13:36:44 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Mon Mar 26 13:36:44 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.830
[Mon Mar 26 13:36:44 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 7.38"
[Mon Mar 26 18:48:53 2012] fullrun_pn_xmm0135722201_pi300-10000_cl_pass0_src27.ximg exists
[Mon Mar 26 18:48:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0135722201_pi300-10000_cl_pass0_src27.csv
[Mon Mar 26 18:48:53 2012] fullrun_pn_xmm0135722201_pi300-10000_cl_pass0_src27_1.ximg exists
[Mon Mar 26 18:48:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0135722201_pi300-10000_cl_pass0_src27.csv
[Mon Mar 26 18:48:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0135722201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0135722201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 18:48:54 2012] fullrun_pn_xmm0135722201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Mon Mar 26 18:48:54 2012] fullrun_pn_xmm0135722201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Mar 26 18:48:54 2012] Fit fullrun_pn_xmm0135722201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Mon Mar 26 19:58:01 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 10.197242 pixels away
[Mon Mar 26 19:58:01 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 19:58:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 19:58:01 2012] Assessing source extent using major
[Mon Mar 26 19:58:01 2012] Source does appear to be extended
[Mon Mar 26 19:58:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 19:58:18 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 19:58:18 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Mon Mar 26 19:58:18 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.830
[Mon Mar 26 19:58:18 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 7.38"
[Tue Mar 27 02:39:33 2012] fullrun_pn_xmm0135722201_pi300-10000_cl_pass1_src25.ximg exists
[Tue Mar 27 02:39:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0135722201_pi300-10000_cl_pass1_src25.csv
[Tue Mar 27 02:39:33 2012] fullrun_pn_xmm0135722201_pi300-10000_cl_pass1_src25_1.ximg exists
[Tue Mar 27 02:39:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0135722201_pi300-10000_cl_pass1_src25.csv
[Tue Mar 27 02:39:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0135722201_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0135722201_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 02:39:34 2012] fullrun_pn_xmm0135722201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Tue Mar 27 02:39:34 2012] fullrun_pn_xmm0135722201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Tue Mar 27 02:39:34 2012] Fit fullrun_pn_xmm0135722201_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Tue Mar 27 03:51:53 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 51.308886 pixels away
[Tue Mar 27 03:51:53 2012] Source 27 is offset by -3.361940 and 1.531739 pixels which is larger than
2 X fitted extent = 1.611044 x 1.611044, not incorporating fit results
[Tue Mar 27 03:51:53 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 10.183800 pixels away
[Tue Mar 27 03:51:53 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 03:51:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 03:51:53 2012] Assessing source extent using major
[Tue Mar 27 03:51:53 2012] Source does appear to be extended
[Tue Mar 27 03:51:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 03:51:53 2012] Source is confused with source 18
[Tue Mar 27 03:52:13 2012] XMMSAS src. selection expression = ellipse(26749.799255, 23801.973328, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 27 03:52:13 2012] Writing source region out to fullrun_pn_xmm0135722201_pi300-10000_pass1_cl_src27_src.reg
[Tue Mar 27 03:52:13 2012] Extracting stamp from image fullrun_pn_xmm0135722201_pi300-10000_cl_sm2.00.img.gz, (271, 237) - (346, 312)
[Tue Mar 27 03:52:13 2012] XMMSAS bgd. selection expression = annulus(26749.799255, 23801.973328, 1087.500000, 2175.000000, X, Y) && !ellipse(28028.358560, 25255.347000, 3187.848092, 3187.848092, 0.000000, X, Y) && !ellipse(26196.422000, 26882.758000, 1082.064031, 1082.064031, 0.000000, X, Y) && !ellipse(29074.588043, 25473.497467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25619.132000, 24712.905600, 2087.416060, 2087.416060, 0.000000, X, Y) && !ellipse(23787.728000, 24148.928000, 1192.528034, 1192.528034, 0.000000, X, Y) && !ellipse(29152.353851, 24610.066010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22841.136271, 23982.642098, 2640.656076, 986.937995, 342.845657, X, Y)
[Tue Mar 27 03:52:13 2012] Writing fullrun_pn_xmm0135722201_pi300-10000_pass1_cl_src27.gif
[Tue Mar 27 06:13:39 2012] Mean detx,y = (1112.59, 1100.12) 
[Tue Mar 27 06:13:44 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 06:14:14 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 06:14:15 2012] Setting source spectrum file to fullrun_pn_xmm0135722201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue Mar 27 06:14:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0135722201_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Wed Mar 28 00:08:58 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 28 00:08:58 2012] rmf not generated due to insufficient counts
[Wed Mar 28 01:24:58 2012] Updating aperture counts using extracted products
[Wed Mar 28 01:24:58 2012] Error reading totcts from fullrun_pn_xmm0135722201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed Mar 28 01:25:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 01:25:00 2012] Using photon index=1.80, rate=0.0143, arf fullrun_pn_xmm0135722201_pi300-10000_pass1_cl_src27.arf
[Wed Mar 28 01:25:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 01:25:00 2012] Updating source flux to 3.4e-14
[Wed Mar 28 01:26:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting