[Wed Aug 29 15:36:43 2012] Detection parameters:
  Position = (224.9, 264.1) = 1 5 29.46 -72 3 36.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 695.5 +/- 37.6
  Background counts = 102.3
  Rate = 0.04 +/- 0.002

[Wed Aug 29 15:36:43 2012] Off-axis axis estimate = 5.88'
[Wed Aug 29 15:39:19 2012] Using EEF radius (= 9.37 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 15:39:19 2012] Initial guess for spatial extent in simple fitting = 9.37"
[Wed Aug 29 15:39:19 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.278
[Wed Aug 29 15:39:19 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 9.37"
[Wed Aug 29 18:06:55 2012] fullrun_pn_xmm0135722101_pi300-10000_cl_pass0_src31.ximg exists
[Wed Aug 29 18:06:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0135722101_pi300-10000_cl_pass0_src31.csv
[Wed Aug 29 18:06:55 2012] fullrun_pn_xmm0135722101_pi300-10000_cl_pass0_src31_1.ximg exists
[Wed Aug 29 18:06:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0135722101_pi300-10000_cl_pass0_src31.csv
[Wed Aug 29 18:06:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0135722101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0135722101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 18:06:55 2012] fullrun_pn_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Wed Aug 29 18:06:55 2012] fullrun_pn_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Wed Aug 29 18:06:55 2012] Fit fullrun_pn_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Wed Aug 29 22:05:11 2012] Warning, spatial fit 31 centroid is now closest to src. 34
[Wed Aug 29 22:05:11 2012] Source 31 is offset by -1.949622 and -7.766318 pixels which is larger than
2 X fitted extent = 1.107274 x 1.107274, not incorporating fit results
[Wed Aug 29 22:05:11 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 22:05:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 22:05:11 2012] Assessing source extent using major
[Wed Aug 29 22:05:11 2012] Source does appear to be extended
[Wed Aug 29 22:05:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 22:05:11 2012] Source is confused with source 34
[Wed Aug 29 22:05:32 2012] Using EEF radius (= 9.37 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 22:05:32 2012] Initial guess for spatial extent in simple fitting = 9.37"
[Wed Aug 29 22:05:32 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.278
[Wed Aug 29 22:05:32 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 9.37"
[Thu Aug 30 00:29:15 2012] fullrun_pn_xmm0135722101_pi300-10000_cl_pass1_src30.ximg exists
[Thu Aug 30 00:29:15 2012] fullrun_pn_xmm0135722101_pi300-10000_cl_pass1_src30_1.ximg exists
[Thu Aug 30 00:29:15 2012] Fit fullrun_pn_xmm0135722101_pi300-10000_cl_pass1_src30 appears to have run properly
[Thu Aug 30 00:29:16 2012] fullrun_pn_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Thu Aug 30 00:29:16 2012] fullrun_pn_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Thu Aug 30 00:29:16 2012] Fit fullrun_pn_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Thu Aug 30 04:49:42 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 13.272045 pixels away
[Thu Aug 30 04:49:42 2012] Spatial fit model total counts = 2897.770000, observed total counts = 2896.000000
[Thu Aug 30 04:49:42 2012] Offset between fit and detection position for source 31 = 2.509373 pixels
[Thu Aug 30 04:49:42 2012] 2213.355000 total counts/ 692.125000 bgd. counts: snr = 57.823265
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 2.509373 pixels
  Position = (227.0, 265.5) = 1 5 27.50 -72 3 30.7
  Extent = 18.7 (18.5-37.5)" x 12.5 (11.5-13.5)", rotation angle = 333 (327-339) degrees
  Source counts = 1521.2 +/- 47.0
  Background counts = 692.1
  Rate = 0.06 +/- 0.002
[Thu Aug 30 04:49:42 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 04:49:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 04:49:42 2012] Assessing source extent using major axis lower bound
[Thu Aug 30 04:49:42 2012] Source does appear to be extended
[Thu Aug 30 04:49:42 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.37
[Thu Aug 30 04:50:05 2012] Counts = 1521.230000, rescaling region sizes by 2.000000
[Thu Aug 30 04:50:05 2012] XMMSAS src. selection expression = ellipse(19699.923000, 23049.002800, 2248.896065, 1503.384043, 333.480000, X, Y)
[Thu Aug 30 04:50:05 2012] Writing source region out to fullrun_pn_xmm0135722101_pi300-10000_pass1_cl_src31_src.reg
[Thu Aug 30 04:50:05 2012] Extracting stamp from image fullrun_pn_xmm0135722101_pi300-10000_cl_sm2.00.img.gz, (98, 136) - (356, 395)
[Thu Aug 30 04:50:05 2012] XMMSAS bgd. selection expression = annulus(19699.923000, 23049.002800, 7496.320216, 14992.640431, X, Y) && !ellipse(27597.955000, 24978.476800, 3153.720091, 3153.720091, 0.000000, X, Y) && !ellipse(16904.410000, 22440.088200, 1704.696049, 1704.696049, 0.000000, X, Y) && !ellipse(16611.796000, 22162.914000, 1664.824048, 1664.824048, 0.000000, X, Y) && !ellipse(15976.794000, 22046.068000, 1606.616046, 1606.616046, 0.000000, X, Y) && !ellipse(14077.864000, 21849.140000, 1272.728037, 1272.728037, 0.000000, X, Y) && !ellipse(15117.226000, 21778.122000, 1805.592052, 1805.592052, 0.000000, X, Y) && !ellipse(14452.515991, 21701.588943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32003.560608, 16139.193710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29867.297485, 25500.002625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20100.254486, 30872.879211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29022.021118, 25412.843323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29257.251404, 24600.518524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23961.182159, 24047.704254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23763.954861, 24010.141769, 2352.832068, 1036.635895, 344.436102, X, Y) && !ellipse(22763.656734, 23810.181601, 1304.008038, 1017.863991, 156.626082, X, Y) && !ellipse(29467.213776, 24233.489929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22294.240000, 23621.730000, 2016.984058, 2016.984058, 0.000000, X, Y) && !ellipse(24604.836000, 24206.712800, 2352.832068, 1005.728029, 343.212300, X, Y) && !ellipse(21675.573602, 23486.870734, 2352.832068, 1022.890659, 345.416924, X, Y) && !ellipse(21110.423131, 23374.817565, 2839.776082, 1064.471255, 340.590769, X, Y) && !ellipse(29987.849091, 23201.535797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25817.112000, 23021.020000, 1188.960034, 1188.960034, 0.000000, X, Y) && !ellipse(18582.576000, 22892.913000, 1583.848046, 1583.848046, 0.000000, X, Y) && !ellipse(33435.914398, 22790.457611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17693.328000, 22505.758000, 1240.232036, 1240.232036, 0.000000, X, Y) && !ellipse(17983.762000, 22676.802000, 1486.592043, 1486.592043, 0.000000, X, Y) && !ellipse(14469.241348, 20915.558228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15413.835724, 20835.935226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14978.343320, 19919.915600, 956.048028, 956.048028, 0.000000, X, Y) && !ellipse(30842.926400, 19000.617600, 1361.644039, 1361.644039, 0.000000, X, Y) && !ellipse(28328.171692, 16234.088440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29717.520000, 15568.722000, 1751.784050, 1751.784050, 0.000000, X, Y) && !ellipse(18910.980576, 15509.777863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32251.171295, 15480.325623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22847.293823, 14822.925766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21362.169240, 13103.552800, 486.377614, 486.377614, 0.000000, X, Y)
[Thu Aug 30 04:50:05 2012] Writing fullrun_pn_xmm0135722101_pi300-10000_pass1_cl_src31.gif
[Thu Aug 30 06:00:56 2012] Mean detx,y = (243.16, 8172.27) 
[Thu Aug 30 06:01:00 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 30 06:04:44 2012] grppha failed
[Thu Aug 30 06:04:44 2012] Setting source spectrum file to fullrun_pn_xmm0135722101_pi300-10000_pass1_cl_src31_src.pi.gz
[Thu Aug 30 06:04:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0135722101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Thu Aug 30 06:43:04 2012] Updating aperture counts using extracted products
[Thu Aug 30 06:43:04 2012] Error reading totcts from fullrun_pn_xmm0135722101_pi300-10000_pass1_cl_src31_src.pi.gz
[Thu Aug 30 06:43:04 2012] No arf file for this source, not re-computing flux
[Thu Aug 30 06:43:07 2012] Flag b found in src. 31 procflags, skipping spectral fitting
[Thu Aug 30 06:43:07 2012] Flag c found in src. 31 procflags, skipping spectral fitting
[Thu Aug 30 06:43:07 2012] Source 31 has no response, skipping
[Thu Aug 30 06:43:08 2012] xmm0135722101/analysis//spectral/fullrun_pn_xmm0135722101_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete