[Wed Aug 29 15:37:13 2012] Detection parameters:
  Position = (158.9, 191.0) = 1 6 32.23 -72 8 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.4 +/- 12.6
  Background counts = 10.1
  Rate = 0.004 +/- 0.0007

[Wed Aug 29 15:37:13 2012] Off-axis axis estimate = 12.77'
[Wed Aug 29 18:06:55 2012] Using EEF radius (= 12.81 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 18:06:55 2012] Initial guess for spatial extent in simple fitting = 12.81"
[Wed Aug 29 18:06:55 2012] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.885
[Wed Aug 29 18:06:55 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 12.81"
[Wed Aug 29 22:05:01 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src36.ximg exists
[Wed Aug 29 22:05:01 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src36.csv
[Wed Aug 29 22:05:01 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src36_1.ximg exists
[Wed Aug 29 22:05:01 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src36.csv
[Wed Aug 29 22:05:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 22:05:02 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Wed Aug 29 22:05:02 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Wed Aug 29 22:05:02 2012] Fit fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Wed Aug 29 22:05:22 2012] Spatial fit model total counts = 441.661000, observed total counts = 395.000000
[Wed Aug 29 22:05:22 2012] Poor agreement between spatial fit and data for source 75
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 29 22:05:22 2012] Warning, spatial fit 36 centroid is now closest to src. 66
[Wed Aug 29 22:05:22 2012] Spatial fit model total counts = 737.937000, observed total counts = 732.000000
[Wed Aug 29 22:05:22 2012] Offset between fit and detection position for source 75 = 1.347377 pixels
[Wed Aug 29 22:05:22 2012] Warning, changing simple spatial fit ID from 36 to 65
[Wed Aug 29 22:05:22 2012] 697.968000 total counts/ 547.322000 bgd. counts: snr = 6.439263
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 1.347377 pixels
  Position = (160.0, 190.2) = 1 6 31.18 -72 8 56.0
  Extent = 24.9 (24.9-49.9)", rotation angle = 0
  Source counts = 150.6 +/- 26.4
  Background counts = 547.3
  Rate = 0.009 +/- 0.002
[Wed Aug 29 22:05:22 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 22:05:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 22:05:22 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 22:05:22 2012] Source does appear to be extended
[Wed Aug 29 22:05:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 22:05:22 2012] Source is confused with source 68
[Thu Aug 30 00:29:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 30 00:29:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 30 00:29:16 2012] Initial guess for spatial extent in simple fitting = 24.93"
[Thu Aug 30 00:29:16 2012] source mask rpix=5.7, npix_max = 155, mask sum = 141, frac = 0.908
[Thu Aug 30 00:29:16 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 24.93"
[Thu Aug 30 04:49:30 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src32.ximg exists
[Thu Aug 30 04:49:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src32.csv
[Thu Aug 30 04:49:30 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src32_1.ximg exists
[Thu Aug 30 04:49:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src32.csv
[Thu Aug 30 04:49:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 04:49:32 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Thu Aug 30 04:49:32 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Thu Aug 30 04:49:32 2012] Fit fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Thu Aug 30 04:49:55 2012] Warning, spatial fit 32 centroid is now closest to src. 58
[Thu Aug 30 04:49:55 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 04:49:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 04:49:55 2012] Assessing source extent using major axis lower bound
[Thu Aug 30 04:49:55 2012] Source does appear to be extended
[Thu Aug 30 04:49:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 06:20:09 2012] XMMSAS src. selection expression = ellipse(13874.078000, 16502.634000, 1495.920043, 1495.920043, 0.000000, X, Y)
[Thu Aug 30 06:20:09 2012] Writing source region out to fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src75_src.reg
[Thu Aug 30 06:20:09 2012] Extracting stamp from image fullrun_mos1_xmm0135722101_pi300-10000_cl_sm2.00.img.gz, (74, 104) - (246, 276)
[Thu Aug 30 06:20:09 2012] XMMSAS bgd. selection expression = annulus(13874.078000, 16502.634000, 2493.200072, 4986.400143, X, Y) && !ellipse(17537.906952, 18711.583893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13220.552000, 18422.922000, 3981.800115, 3981.800115, 0.000000, X, Y) && !ellipse(14808.358948, 17616.700256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16230.884000, 15981.224000, 1263.040036, 1263.040036, 0.000000, X, Y) && !ellipse(14872.231400, 15501.512000, 1677.368048, 1677.368048, 0.000000, X, Y) && !ellipse(15609.876450, 16828.037079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14059.311400, 16453.656000, 1695.568049, 1695.568049, 0.000000, X, Y) && !ellipse(15339.674118, 16393.998199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13682.236000, 16971.754000, 2033.160059, 2033.160059, 0.000000, X, Y) && !ellipse(15828.615021, 17528.148392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14102.730484, 15795.012970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15326.505173, 18726.854294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16109.662000, 16020.908800, 1987.648057, 1987.648057, 0.000000, X, Y) && !ellipse(16542.758163, 16319.135666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14779.689941, 16644.646240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14276.029556, 16906.124146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15337.373535, 17508.904739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12828.208000, 18588.964000, 4062.680117, 4062.680117, 0.000000, X, Y) && !ellipse(12595.578000, 19073.018000, 1995.448057, 1995.448057, 0.000000, X, Y) && !ellipse(14740.947754, 18210.798904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13817.016144, 17605.506653, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 30 06:20:09 2012] Writing fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src75.gif
[Thu Aug 30 06:33:19 2012] Mean detx,y = (-14861.22, 4811.06) 
[Thu Aug 30 06:33:20 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 30 06:33:36 2012] grppha failed
[Thu Aug 30 06:33:36 2012] Setting source spectrum file to fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src75_src.pi.gz
[Thu Aug 30 06:33:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Thu Aug 30 06:43:04 2012] Updating aperture counts using extracted products
[Thu Aug 30 06:43:04 2012] Error reading totcts from fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src75_src.pi.gz
[Thu Aug 30 06:43:05 2012] No arf file for this source, not re-computing flux
[Thu Aug 30 06:43:06 2012] Flag p found in src. 75 procflags, skipping spectral fitting
[Thu Aug 30 06:43:06 2012] Flag c found in src. 75 procflags, skipping spectral fitting
[Thu Aug 30 06:43:06 2012] Source 75 has no response, skipping
[Thu Aug 30 06:43:07 2012] xmm0135722101/analysis//spectral/fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src75_pl.csv not found, spectral fit skipped or did not complete