[Wed Aug 29 15:37:13 2012] Detection parameters:
  Position = (158.7, 197.0) = 1 6 32.37 -72 8 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.4 +/- 14.1
  Background counts = 12.2
  Rate = 0.004 +/- 0.0008

[Wed Aug 29 15:37:13 2012] Off-axis axis estimate = 12.52'
[Wed Aug 29 18:06:55 2012] Using EEF radius (= 12.69 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 18:06:55 2012] Initial guess for spatial extent in simple fitting = 12.69"
[Wed Aug 29 18:06:55 2012] source mask rpix=2.9, npix_max = 46, mask sum = 39, frac = 0.835
[Wed Aug 29 18:06:55 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 12.69"
[Wed Aug 29 22:05:01 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src48.ximg exists
[Wed Aug 29 22:05:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src48.csv
[Wed Aug 29 22:05:01 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src48_1.ximg exists
[Wed Aug 29 22:05:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src48.csv
[Wed Aug 29 22:05:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 22:05:03 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Wed Aug 29 22:05:03 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Wed Aug 29 22:05:03 2012] Fit fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Wed Aug 29 22:05:22 2012] Spatial fit model total counts = 541.851000, observed total counts = 532.000000
[Wed Aug 29 22:05:22 2012] Offset between fit and detection position for source 69 = 1.643062 pixels
[Wed Aug 29 22:05:22 2012] Warning, changing simple spatial fit ID from 48 to 44
[Wed Aug 29 22:05:22 2012] 537.853000 total counts/ 241.784000 bgd. counts: snr = 19.040535
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 1.643062 pixels
  Position = (157.8, 195.6) = 1 6 33.22 -72 8 32.5
  Extent = 25.4 (21.9-50.8)", rotation angle = 0
  Source counts = 296.1 +/- 23.2
  Background counts = 241.8
  Rate = 0.02 +/- 0.001
[Wed Aug 29 22:05:22 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 22:05:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 22:05:22 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 22:05:22 2012] Source does appear to be extended
[Wed Aug 29 22:05:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 22:05:22 2012] Source is confused with source 61
[Thu Aug 30 00:29:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 30 00:29:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 30 00:29:16 2012] Initial guess for spatial extent in simple fitting = 25.41"
[Thu Aug 30 00:29:16 2012] source mask rpix=5.8, npix_max = 160, mask sum = 164, frac = 1.019
[Thu Aug 30 00:29:16 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 25.41"
[Thu Aug 30 04:49:31 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src39.ximg exists
[Thu Aug 30 04:49:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src39.csv
[Thu Aug 30 04:49:31 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src39_1.ximg exists
[Thu Aug 30 04:49:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src39.csv
[Thu Aug 30 04:49:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 04:49:32 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Thu Aug 30 04:49:32 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Thu Aug 30 04:49:32 2012] Fit fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Thu Aug 30 04:49:55 2012] Warning, spatial fit 39 centroid is now closest to src. 62
[Thu Aug 30 04:49:55 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 04:49:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 04:49:55 2012] Assessing source extent using major axis lower bound
[Thu Aug 30 04:49:55 2012] Source does appear to be extended
[Thu Aug 30 04:49:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 06:20:09 2012] XMMSAS src. selection expression = ellipse(13682.236000, 16971.754000, 1524.870044, 1524.870044, 0.000000, X, Y)
[Thu Aug 30 06:20:09 2012] Writing source region out to fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src69_src.reg
[Thu Aug 30 06:20:09 2012] Extracting stamp from image fullrun_mos1_xmm0135722101_pi300-10000_cl_sm2.00.img.gz, (70, 108) - (245, 283)
[Thu Aug 30 06:20:09 2012] XMMSAS bgd. selection expression = annulus(13682.236000, 16971.754000, 2541.450073, 5082.900146, X, Y) && !ellipse(17537.906952, 18711.583893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13220.552000, 18422.922000, 3981.800115, 3981.800115, 0.000000, X, Y) && !ellipse(14808.358948, 17616.700256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16230.884000, 15981.224000, 1263.040036, 1263.040036, 0.000000, X, Y) && !ellipse(14872.231400, 15501.512000, 1677.368048, 1677.368048, 0.000000, X, Y) && !ellipse(15609.876450, 16828.037079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13874.078000, 16502.634000, 1994.560057, 1994.560057, 0.000000, X, Y) && !ellipse(14059.311400, 16453.656000, 1695.568049, 1695.568049, 0.000000, X, Y) && !ellipse(15339.674118, 16393.998199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15828.615021, 17528.148392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14102.730484, 15795.012970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15326.505173, 18726.854294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16109.662000, 16020.908800, 1987.648057, 1987.648057, 0.000000, X, Y) && !ellipse(16542.758163, 16319.135666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14779.689941, 16644.646240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14276.029556, 16906.124146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15337.373535, 17508.904739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12828.208000, 18588.964000, 4062.680117, 4062.680117, 0.000000, X, Y) && !ellipse(12595.578000, 19073.018000, 1995.448057, 1995.448057, 0.000000, X, Y) && !ellipse(14740.947754, 18210.798904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13817.016144, 17605.506653, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 30 06:20:09 2012] Writing fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src69.gif
[Thu Aug 30 06:34:58 2012] Mean detx,y = (-14953.01, 4309.49) 
[Thu Aug 30 06:34:59 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 30 06:35:14 2012] grppha failed
[Thu Aug 30 06:35:14 2012] Setting source spectrum file to fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src69_src.pi.gz
[Thu Aug 30 06:35:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Thu Aug 30 06:43:04 2012] Updating aperture counts using extracted products
[Thu Aug 30 06:43:04 2012] Error reading totcts from fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src69_src.pi.gz
[Thu Aug 30 06:43:05 2012] No arf file for this source, not re-computing flux
[Thu Aug 30 06:43:06 2012] Flag c found in src. 69 procflags, skipping spectral fitting
[Thu Aug 30 06:43:06 2012] Source 69 has no response, skipping
[Thu Aug 30 06:43:07 2012] xmm0135722101/analysis//spectral/fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src69_pl.csv not found, spectral fit skipped or did not complete