[Wed Aug 29 15:37:13 2012] Detection parameters:
  Position = (149.2, 211.0) = 1 6 41.24 -72 7 22.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.9 +/- 12.6
  Background counts = 18.0
  Rate = 0.003 +/- 0.0007

[Wed Aug 29 15:37:13 2012] Off-axis axis estimate = 12.54'
[Wed Aug 29 18:06:55 2012] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 18:06:55 2012] Initial guess for spatial extent in simple fitting = 12.70"
[Wed Aug 29 18:06:55 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.898
[Wed Aug 29 18:06:55 2012] Giving source the simple spatial ID 74 for pass 0, mean size = 12.70"
[Wed Aug 29 22:05:01 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src74.ximg exists
[Wed Aug 29 22:05:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src74.csv
[Wed Aug 29 22:05:01 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src74_1.ximg exists
[Wed Aug 29 22:05:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src74.csv
[Wed Aug 29 22:05:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 22:05:03 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Wed Aug 29 22:05:03 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Wed Aug 29 22:05:03 2012] Fit fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src74 appears to have run properly
[Wed Aug 29 22:05:22 2012] Source 62 is offset by 2.850666 and 1.584425 pixels which is larger than
2 X fitted extent = 1.590818 x 1.590818, not incorporating fit results
[Wed Aug 29 22:05:22 2012] Warning, spatial fit 74 centroid is now closest to src. 65
[Wed Aug 29 22:05:22 2012] Source 62 is offset by 7.692551 and 1.558632 pixels which is larger than
2 X fitted extent = 1.484662 x 1.484662, not incorporating fit results
[Wed Aug 29 22:05:22 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 22:05:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 22:05:22 2012] Assessing source extent using major
[Wed Aug 29 22:05:22 2012] Source does appear to be extended
[Wed Aug 29 22:05:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 22:05:22 2012] Source is confused with source 66
[Thu Aug 30 00:29:16 2012] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 00:29:16 2012] Initial guess for spatial extent in simple fitting = 12.70"
[Thu Aug 30 00:29:16 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.898
[Thu Aug 30 00:29:16 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 12.70"
[Thu Aug 30 04:49:31 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src63.ximg exists
[Thu Aug 30 04:49:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src63.csv
[Thu Aug 30 04:49:31 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src63_1.ximg exists
[Thu Aug 30 04:49:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src63.csv
[Thu Aug 30 04:49:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 04:49:32 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Thu Aug 30 04:49:32 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Thu Aug 30 04:49:32 2012] Fit fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Thu Aug 30 04:49:55 2012] Spatial fit model total counts = 1601.120000, observed total counts = 1747.000000
[Thu Aug 30 04:49:55 2012] Offset between fit and detection position for source 62 = 3.447497 pixels
[Thu Aug 30 04:49:55 2012] Warning, changing simple spatial fit ID from 63 to 39
[Thu Aug 30 04:49:55 2012] 1539.931000 total counts/ 956.803000 bgd. counts: snr = 18.851792
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 3.447497 pixels
  Position = (148.0, 214.2) = 1 6 42.33 -72 7 11.2
  Extent = 50.8 (50.7-50.8)", rotation angle = 0
  Source counts = 583.1 +/- 39.2
  Background counts = 956.8
  Rate = 0.03 +/- 0.002
[Thu Aug 30 04:49:55 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 04:49:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 04:49:55 2012] Assessing source extent using major axis lower bound
[Thu Aug 30 04:49:55 2012] Source does appear to be extended
[Thu Aug 30 04:49:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 06:20:10 2012] XMMSAS src. selection expression = ellipse(12828.208000, 18588.964000, 3047.010088, 3047.010088, 0.000000, X, Y)
[Thu Aug 30 06:20:10 2012] Writing source region out to fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src62_src.reg
[Thu Aug 30 06:20:10 2012] Extracting stamp from image fullrun_mos1_xmm0135722101_pi300-10000_cl_sm2.00.img.gz, (0, 39) - (323, 389)
[Thu Aug 30 06:20:10 2012] XMMSAS bgd. selection expression = annulus(12828.208000, 18588.964000, 5078.350146, 10156.700292, X, Y) && !ellipse(17537.906952, 18711.583893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13898.633600, 30161.526000, 1886.296054, 1886.296054, 0.000000, X, Y) && !ellipse(13814.165970, 29345.095703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20513.481918, 25878.755829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12653.751200, 27922.979824, 1626.208047, 447.884813, 353.127010, X, Y) && !ellipse(15602.192440, 29460.390000, 1640.640047, 1640.640047, 0.000000, X, Y) && !ellipse(13220.552000, 18422.922000, 3981.800115, 3981.800115, 0.000000, X, Y) && !ellipse(14808.358948, 17616.700256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13425.948000, 28729.894000, 1867.104054, 420.159212, 310.074000, X, Y) && !ellipse(11867.927277, 27242.400116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16230.884000, 15981.224000, 1263.040036, 1263.040036, 0.000000, X, Y) && !ellipse(13683.486755, 27603.664642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14872.231400, 15501.512000, 1677.368048, 1677.368048, 0.000000, X, Y) && !ellipse(15609.876450, 16828.037079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13535.972000, 28126.585938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13874.078000, 16502.634000, 1994.560057, 1994.560057, 0.000000, X, Y) && !ellipse(14577.378036, 28392.561462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13090.187271, 27970.679962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14059.311400, 16453.656000, 1695.568049, 1695.568049, 0.000000, X, Y) && !ellipse(15339.674118, 16393.998199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13682.236000, 16971.754000, 2033.160059, 2033.160059, 0.000000, X, Y) && !ellipse(15828.615021, 17528.148392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14783.574249, 27625.666870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14102.730484, 15795.012970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15326.505173, 18726.854294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16109.662000, 16020.908800, 1987.648057, 1987.648057, 0.000000, X, Y) && !ellipse(16542.758163, 16319.135666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14744.983398, 29121.866150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14779.689941, 16644.646240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11335.575317, 27471.247711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16015.226410, 28727.281006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14276.029556, 16906.124146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15337.373535, 17508.904739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12595.578000, 19073.018000, 1995.448057, 1995.448057, 0.000000, X, Y) && !ellipse(14740.947754, 18210.798904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13817.016144, 17605.506653, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 30 06:20:10 2012] Writing fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src62.gif
[Thu Aug 30 06:39:01 2012] Mean detx,y = (-14630.24, 2446.07) 
[Thu Aug 30 06:39:02 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 30 06:40:18 2012] grppha failed
[Thu Aug 30 06:40:18 2012] Setting source spectrum file to fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src62_src.pi.gz
[Thu Aug 30 06:40:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Thu Aug 30 06:43:04 2012] Updating aperture counts using extracted products
[Thu Aug 30 06:43:04 2012] Error reading totcts from fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src62_src.pi.gz
[Thu Aug 30 06:43:05 2012] No arf file for this source, not re-computing flux
[Thu Aug 30 06:43:06 2012] Flag b found in src. 62 procflags, skipping spectral fitting
[Thu Aug 30 06:43:06 2012] Flag c found in src. 62 procflags, skipping spectral fitting
[Thu Aug 30 06:43:06 2012] Source 62 has no response, skipping
[Thu Aug 30 06:43:07 2012] xmm0135722101/analysis//spectral/fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src62_pl.csv not found, spectral fit skipped or did not complete