[Wed Aug 29 15:37:13 2012] Detection parameters:
  Position = (151.0, 322.1) = 1 6 38.50 -71 59 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.4 +/- 13.2
  Background counts = 31.5
  Rate = 0.004 +/- 0.0008

[Wed Aug 29 15:37:13 2012] Off-axis axis estimate = 10.82'
[Wed Aug 29 18:06:55 2012] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 18:06:55 2012] Initial guess for spatial extent in simple fitting = 11.84"
[Wed Aug 29 18:06:55 2012] source mask rpix=2.7, npix_max = 41, mask sum = 35, frac = 0.843
[Wed Aug 29 18:06:55 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 11.84"
[Wed Aug 29 22:05:01 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src41.ximg exists
[Wed Aug 29 22:05:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src41.csv
[Wed Aug 29 22:05:01 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src41_1.ximg exists
[Wed Aug 29 22:05:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src41.csv
[Wed Aug 29 22:05:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 22:05:03 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Wed Aug 29 22:05:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Wed Aug 29 22:05:03 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Wed Aug 29 22:05:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Wed Aug 29 22:05:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 22:05:22 2012] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 13.727180 pixels away
[Wed Aug 29 22:05:22 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 22:05:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 22:05:22 2012] Assessing source extent using major
[Wed Aug 29 22:05:22 2012] Source does appear to be extended
[Wed Aug 29 22:05:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 22:05:22 2012] Source is confused with source 3
[Thu Aug 30 00:29:16 2012] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 00:29:16 2012] Initial guess for spatial extent in simple fitting = 11.84"
[Thu Aug 30 00:29:16 2012] source mask rpix=2.7, npix_max = 41, mask sum = 35, frac = 0.843
[Thu Aug 30 00:29:16 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 11.84"
[Thu Aug 30 04:49:30 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src35.ximg exists
[Thu Aug 30 04:49:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src35.csv
[Thu Aug 30 04:49:30 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src35_1.ximg exists
[Thu Aug 30 04:49:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src35.csv
[Thu Aug 30 04:49:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 04:49:32 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Thu Aug 30 04:49:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Thu Aug 30 04:49:32 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Thu Aug 30 04:49:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Thu Aug 30 04:49:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 04:49:55 2012] Spatial fit model total counts = 808.410000, observed total counts = 730.000000
[Thu Aug 30 04:49:55 2012] Poor agreement between spatial fit and data for source 48
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug 30 04:49:55 2012] Source 48 is offset by 7.386382 and 1.737655 pixels which is larger than
2 X fitted extent = 1.414685 x 1.414685, not incorporating fit results
[Thu Aug 30 04:49:55 2012] Source 48 is offset by 3.732865 and 6.903287 pixels which is larger than
2 X fitted extent = 1.330294 x 1.330294, not incorporating fit results
[Thu Aug 30 04:49:55 2012] Warning, spatial fit 35 centroid is now closest to src. 50
[Thu Aug 30 04:49:55 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 04:49:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 04:49:55 2012] Assessing source extent using major
[Thu Aug 30 04:49:55 2012] Source does appear to be extended
[Thu Aug 30 04:49:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 06:20:09 2012] XMMSAS src. selection expression = ellipse(13090.187271, 27970.679962, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 30 06:20:09 2012] Writing source region out to fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src48_src.reg
[Thu Aug 30 06:20:09 2012] Extracting stamp from image fullrun_mos1_xmm0135722101_pi300-10000_cl_sm2.00.img.gz, (114, 285) - (189, 360)
[Thu Aug 30 06:20:09 2012] XMMSAS bgd. selection expression = annulus(13090.187271, 27970.679962, 1087.500000, 2175.000000, X, Y) && !ellipse(13898.633600, 30161.526000, 1886.296054, 1886.296054, 0.000000, X, Y) && !ellipse(13814.165970, 29345.095703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15060.200424, 29969.062103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13835.958600, 30734.438000, 1910.128055, 1910.128055, 0.000000, X, Y) && !ellipse(12653.751200, 27922.979824, 1626.208047, 447.884813, 353.127010, X, Y) && !ellipse(15602.192440, 29460.390000, 1640.640047, 1640.640047, 0.000000, X, Y) && !ellipse(13425.948000, 28729.894000, 1867.104054, 420.159212, 310.074000, X, Y) && !ellipse(11867.927277, 27242.400116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13683.486755, 27603.664642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14432.604599, 29625.570343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13535.972000, 28126.585938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15680.030289, 30228.009766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14577.378036, 28392.561462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14783.574249, 27625.666870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14744.983398, 29121.866150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11335.575317, 27471.247711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16015.226410, 28727.281006, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 30 06:20:09 2012] Writing fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src48.gif
[Thu Aug 30 06:34:03 2012] Mean detx,y = (-13369.74, -6262.94) 
[Thu Aug 30 06:34:04 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 30 06:34:11 2012] grppha failed
[Thu Aug 30 06:34:11 2012] Setting source spectrum file to fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src48_src.pi.gz
[Thu Aug 30 06:34:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Thu Aug 30 06:42:11 2012] Not generating rmf since there are only 76 counts
[Thu Aug 30 06:42:11 2012] rmf not generated due to insufficient counts
[Thu Aug 30 06:43:04 2012] Updating aperture counts using extracted products
[Thu Aug 30 06:43:04 2012] Error reading totcts from fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src48_src.pi.gz
[Thu Aug 30 06:43:05 2012] No arf file for this source, not re-computing flux
[Thu Aug 30 06:43:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug 30 06:43:07 2012] xmm0135722101/analysis//spectral/fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete