[Wed Aug 29 15:37:12 2012] Detection parameters:
  Position = (166.2, 362.9) = 1 6 23.93 -71 56 22.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.3 +/- 12.9
  Background counts = 12.8
  Rate = 0.004 +/- 0.0007

[Wed Aug 29 15:37:13 2012] Off-axis axis estimate = 10.66'
[Wed Aug 29 18:06:55 2012] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 18:06:55 2012] Initial guess for spatial extent in simple fitting = 11.76"
[Wed Aug 29 18:06:55 2012] source mask rpix=2.7, npix_max = 41, mask sum = 32, frac = 0.779
[Wed Aug 29 18:06:55 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 11.76"
[Wed Aug 29 22:05:01 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src58.ximg exists
[Wed Aug 29 22:05:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src58.csv
[Wed Aug 29 22:05:01 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src58_1.ximg exists
[Wed Aug 29 22:05:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src58.csv
[Wed Aug 29 22:05:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 22:05:03 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Wed Aug 29 22:05:03 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Wed Aug 29 22:05:03 2012] Fit fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src58 appears to have run properly
[Wed Aug 29 22:05:22 2012] Warning, spatial fit 58 centroid is now closest to src. 37
[Wed Aug 29 22:05:22 2012] Source 34 is offset by 0.663694 and -2.669421 pixels which is larger than
2 X fitted extent = 1.379885 x 1.379885, not incorporating fit results
[Wed Aug 29 22:05:22 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 22:05:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 22:05:22 2012] Assessing source extent using major
[Wed Aug 29 22:05:22 2012] Source does appear to be extended
[Wed Aug 29 22:05:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 22:05:22 2012] Source is confused with source 5
[Thu Aug 30 00:29:16 2012] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Thu Aug 30 00:29:16 2012] Initial guess for spatial extent in simple fitting = 11.76"
[Thu Aug 30 00:29:16 2012] source mask rpix=2.7, npix_max = 41, mask sum = 32, frac = 0.779
[Thu Aug 30 00:29:16 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 11.76"
[Thu Aug 30 04:49:31 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src48.ximg exists
[Thu Aug 30 04:49:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src48.csv
[Thu Aug 30 04:49:31 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src48_1.ximg exists
[Thu Aug 30 04:49:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src48.csv
[Thu Aug 30 04:49:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 04:49:32 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Thu Aug 30 04:49:32 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Thu Aug 30 04:49:32 2012] Fit fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Thu Aug 30 04:49:55 2012] Warning, spatial fit 48 centroid is now closest to src. 38
[Thu Aug 30 04:49:55 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 04:49:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 04:49:55 2012] Assessing source extent using major
[Thu Aug 30 04:49:55 2012] Source does appear to be extended
[Thu Aug 30 04:49:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 30 06:20:09 2012] XMMSAS src. selection expression = ellipse(14411.141342, 31521.160370, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 30 06:20:09 2012] Writing source region out to fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src34_src.reg
[Thu Aug 30 06:20:09 2012] Extracting stamp from image fullrun_mos1_xmm0135722101_pi300-10000_cl_sm2.00.img.gz, (129, 325) - (204, 400)
[Thu Aug 30 06:20:09 2012] XMMSAS bgd. selection expression = annulus(14411.141342, 31521.160370, 1087.500000, 2175.000000, X, Y) && !ellipse(13898.633600, 30161.526000, 1886.296054, 1886.296054, 0.000000, X, Y) && !ellipse(15796.716171, 32055.033661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13814.165970, 29345.095703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15776.872482, 31187.670105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15060.200424, 29969.062103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13835.958600, 30734.438000, 1910.128055, 1910.128055, 0.000000, X, Y) && !ellipse(12653.751200, 27922.979824, 1626.208047, 447.884813, 353.127010, X, Y) && !ellipse(15602.192440, 29460.390000, 1640.640047, 1640.640047, 0.000000, X, Y) && !ellipse(14698.001328, 31181.260864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15322.489441, 31188.806458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13425.948000, 28729.894000, 1867.104054, 420.159212, 310.074000, X, Y) && !ellipse(13774.760025, 31272.108002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14432.604599, 29625.570343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15680.030289, 30228.009766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13883.097168, 32052.479523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16785.153046, 30462.902863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15048.868759, 33126.632690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14744.983398, 29121.866150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16015.226410, 28727.281006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16524.549973, 33508.802917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16135.343918, 33010.918549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16123.732147, 33969.230133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14988.216000, 33659.772860, 1935.568056, 1935.568056, 0.000000, X, Y)
[Thu Aug 30 06:20:09 2012] Writing fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src34.gif
[Thu Aug 30 06:36:11 2012] Mean detx,y = (-11215.70, -9453.00) 
[Thu Aug 30 06:36:12 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 30 06:36:17 2012] grppha failed
[Thu Aug 30 06:36:17 2012] Setting source spectrum file to fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src34_src.pi.gz
[Thu Aug 30 06:36:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Thu Aug 30 06:42:12 2012] Not generating rmf since there are only 68 counts
[Thu Aug 30 06:42:12 2012] rmf not generated due to insufficient counts
[Thu Aug 30 06:43:04 2012] Updating aperture counts using extracted products
[Thu Aug 30 06:43:04 2012] Error reading totcts from fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src34_src.pi.gz
[Thu Aug 30 06:43:05 2012] No arf file for this source, not re-computing flux
[Thu Aug 30 06:43:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug 30 06:43:07 2012] xmm0135722101/analysis//spectral/fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete