[Wed Aug 29 15:37:12 2012] Detection parameters:
  Position = (145.1, 321.0) = 1 6 44.05 -71 59 26.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.6 +/- 14.1
  Background counts = 29.7
  Rate = 0.006 +/- 0.0008

[Wed Aug 29 15:37:13 2012] Off-axis axis estimate = 11.24'
[Wed Aug 29 18:06:55 2012] Using EEF radius (= 12.05 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 18:06:55 2012] Initial guess for spatial extent in simple fitting = 12.05"
[Wed Aug 29 18:06:55 2012] source mask rpix=2.8, npix_max = 42, mask sum = 35, frac = 0.819
[Wed Aug 29 18:06:55 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 12.05"
[Wed Aug 29 22:05:01 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src16.ximg exists
[Wed Aug 29 22:05:01 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src16_1.ximg exists
[Wed Aug 29 22:05:01 2012] Fit fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_src16 appears to have run properly
[Wed Aug 29 22:05:02 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Wed Aug 29 22:05:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Wed Aug 29 22:05:02 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Wed Aug 29 22:05:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Wed Aug 29 22:05:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135722101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 22:05:22 2012] Spatial fit model total counts = 568.205000, observed total counts = 533.000000
[Wed Aug 29 22:05:22 2012] Offset between fit and detection position for source 3 = 1.004165 pixels
[Wed Aug 29 22:05:22 2012] 503.602000 total counts/ 357.208000 bgd. counts: snr = 7.745736
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.004165 pixels
  Position = (146.0, 321.5) = 1 6 43.22 -71 59 24.4
  Extent = 20.3 (12.8-24.1)" x 5.6 (4.1-7.9)", rotation angle = 353 (344-1) degrees
  Source counts = 146.4 +/- 22.4
  Background counts = 357.2
  Rate = 0.008 +/- 0.001
[Wed Aug 29 22:05:22 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 22:05:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 22:05:22 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 22:05:22 2012] Source does appear to be extended
[Wed Aug 29 22:05:22 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.63
[Wed Aug 29 22:05:22 2012] Source is asymmetric
[Wed Aug 29 22:05:22 2012] Source is confused with source 12
[Wed Aug 29 22:05:22 2012] Source is confused with source 10
[Wed Aug 29 22:05:22 2012] Source is confused with source 50
[Wed Aug 29 22:05:22 2012] Source is confused with source 9
[Wed Aug 29 22:05:22 2012] Source is confused with source 48
[Thu Aug 30 00:29:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 30 00:29:16 2012] Initial guess for spatial extent in simple fitting = 12.96"
[Thu Aug 30 00:29:16 2012] source mask rpix=3.0, npix_max = 48, mask sum = 38, frac = 0.784
[Thu Aug 30 00:29:16 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 12.96"
[Thu Aug 30 04:49:30 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src13.ximg exists
[Thu Aug 30 04:49:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src13.csv
[Thu Aug 30 04:49:30 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Aug 30 04:49:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src13.csv
[Thu Aug 30 04:49:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 04:49:31 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Aug 30 04:49:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Thu Aug 30 04:49:31 2012] fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Aug 30 04:49:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Thu Aug 30 04:49:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135722101_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 30 04:49:55 2012] Warning, spatial fit 13 centroid is now closest to src. 50
[Thu Aug 30 04:49:55 2012] Vigneting correction estimate = 1.000000
[Thu Aug 30 04:49:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 30 04:49:55 2012] Assessing source extent using major axis lower bound
[Thu Aug 30 04:49:55 2012] Source does appear to be extended
[Thu Aug 30 04:49:55 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.63
[Thu Aug 30 04:49:55 2012] Source is asymmetric
[Thu Aug 30 06:20:08 2012] XMMSAS src. selection expression = ellipse(12653.751200, 27922.979824, 1219.656035, 335.913610, 353.127010, X, Y)
[Thu Aug 30 06:20:08 2012] Writing source region out to fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src3_src.reg
[Thu Aug 30 06:20:08 2012] Extracting stamp from image fullrun_mos1_xmm0135722101_pi300-10000_cl_sm2.00.img.gz, (76, 251) - (216, 392)
[Thu Aug 30 06:20:08 2012] XMMSAS bgd. selection expression = annulus(12653.751200, 27922.979824, 2032.760058, 4065.520117, X, Y) && !ellipse(13898.633600, 30161.526000, 1886.296054, 1886.296054, 0.000000, X, Y) && !ellipse(15796.716171, 32055.033661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13814.165970, 29345.095703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15776.872482, 31187.670105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15060.200424, 29969.062103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13835.958600, 30734.438000, 1910.128055, 1910.128055, 0.000000, X, Y) && !ellipse(15602.192440, 29460.390000, 1640.640047, 1640.640047, 0.000000, X, Y) && !ellipse(14698.001328, 31181.260864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15322.489441, 31188.806458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13425.948000, 28729.894000, 1867.104054, 420.159212, 310.074000, X, Y) && !ellipse(11867.927277, 27242.400116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13774.760025, 31272.108002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13683.486755, 27603.664642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14432.604599, 29625.570343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13535.972000, 28126.585938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15680.030289, 30228.009766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14577.378036, 28392.561462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13090.187271, 27970.679962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14783.574249, 27625.666870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13883.097168, 32052.479523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14411.141342, 31521.160370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16785.153046, 30462.902863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14744.983398, 29121.866150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11335.575317, 27471.247711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16015.226410, 28727.281006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14988.216000, 33659.772860, 1935.568056, 1935.568056, 0.000000, X, Y)
[Thu Aug 30 06:20:08 2012] Writing fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src3.gif
[Thu Aug 30 06:28:08 2012] Mean detx,y = (-13629.86, -6334.92) 
[Thu Aug 30 06:28:09 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 30 06:28:24 2012] grppha failed
[Thu Aug 30 06:28:24 2012] Setting source spectrum file to fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src3_src.pi.gz
[Thu Aug 30 06:28:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Aug 30 06:43:04 2012] Updating aperture counts using extracted products
[Thu Aug 30 06:43:04 2012] Error reading totcts from fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src3_src.pi.gz
[Thu Aug 30 06:43:05 2012] No arf file for this source, not re-computing flux
[Thu Aug 30 06:43:06 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Thu Aug 30 06:43:06 2012] Source 3 has no response, skipping
[Thu Aug 30 06:43:07 2012] xmm0135722101/analysis//spectral/fullrun_mos1_xmm0135722101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete