[Tue Dec 27 11:00:29 2011] Detection parameters:
  Position = (476.2, 253.2) = 1 1 37.06 -72 4 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 503.3 +/- 27.0
  Background counts = 11.0
  Rate = 0.02 +/- 0.0009

[Tue Dec 27 11:00:33 2011] Off-axis axis estimate = 13.30'
[Wed Dec 28 10:27:03 2011] Using EEF radius (= 13.08 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 10:27:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 28 10:27:03 2011] Initial guess for spatial extent in simple fitting = 13.08"
[Wed Dec 28 10:27:03 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.996
[Wed Dec 28 10:27:03 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 13.08"
[Fri Dec 30 00:46:09 2011] fullrun_mos1_xmm0135722001_pi300-10000_cl_pass0_src6.ximg exists
[Fri Dec 30 00:46:09 2011] fullrun_mos1_xmm0135722001_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Dec 30 00:46:09 2011] Fit fullrun_mos1_xmm0135722001_pi300-10000_cl_pass0_src6 appears to have run properly
[Fri Dec 30 00:46:10 2011] fullrun_mos1_xmm0135722001_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Dec 30 00:46:10 2011] fullrun_mos1_xmm0135722001_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Dec 30 00:46:10 2011] Fit fullrun_mos1_xmm0135722001_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Dec 30 03:12:29 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 17.769959 pixels away
[Fri Dec 30 03:12:29 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 03:12:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 03:12:29 2011] Assessing source extent using major
[Fri Dec 30 03:12:29 2011] Source does appear to be extended
[Fri Dec 30 03:12:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 04:47:57 2011] Using EEF radius (= 13.08 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 04:47:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 30 04:47:57 2011] Initial guess for spatial extent in simple fitting = 13.08"
[Fri Dec 30 04:47:57 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.996
[Fri Dec 30 04:47:57 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 13.08"
[Fri Dec 30 09:35:07 2011] fullrun_mos1_xmm0135722001_pi300-10000_cl_pass1_src6.ximg exists
[Fri Dec 30 09:35:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722001_pi300-10000_cl_pass1_src6.csv
[Fri Dec 30 09:35:07 2011] fullrun_mos1_xmm0135722001_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Dec 30 09:35:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0135722001_pi300-10000_cl_pass1_src6.csv
[Fri Dec 30 09:35:07 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0135722001_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0135722001_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:35:08 2011] fullrun_mos1_xmm0135722001_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Dec 30 09:35:08 2011] fullrun_mos1_xmm0135722001_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Dec 30 09:35:08 2011] Fit fullrun_mos1_xmm0135722001_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Dec 30 11:45:58 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 17.769959 pixels away
[Fri Dec 30 11:45:58 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 11:45:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 11:45:58 2011] Assessing source extent using major
[Fri Dec 30 11:45:58 2011] Source does appear to be extended
[Fri Dec 30 11:45:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 14:28:36 2011] XMMSAS src. selection expression = ellipse(41385.125214, 21978.096970, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 30 14:28:36 2011] Writing source region out to fullrun_mos1_xmm0135722001_pi300-10000_pass1_cl_src2_src.reg
[Fri Dec 30 14:28:36 2011] Extracting stamp from image fullrun_mos1_xmm0135722001_pi300-10000_cl_sm2.00.img.gz, (439, 216) - (514, 291)
[Fri Dec 30 14:28:36 2011] XMMSAS bgd. selection expression = annulus(41385.125214, 21978.096970, 1087.500000, 2175.000000, X, Y)
[Fri Dec 30 14:28:36 2011] Writing fullrun_mos1_xmm0135722001_pi300-10000_pass1_cl_src2.gif
[Fri Dec 30 15:17:36 2011] Mean detx,y = (12928.79, 5585.66) 
[Fri Dec 30 15:17:39 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 15:18:23 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 15:18:23 2011] Setting source spectrum file to fullrun_mos1_xmm0135722001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Dec 30 15:18:23 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0135722001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Dec 30 16:34:19 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 30 16:34:19 2011] rmf not generated due to insufficient counts
[Fri Dec 30 23:18:57 2011] Updating aperture counts using extracted products
[Fri Dec 30 23:18:57 2011] Error reading totcts from fullrun_mos1_xmm0135722001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Dec 30 23:18:58 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 30 23:18:58 2011] Using photon index=1.80, rate=0.0159, arf fullrun_mos1_xmm0135722001_pi300-10000_pass1_cl_src2.arf
[Fri Dec 30 23:18:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 30 23:18:58 2011] Updating source flux to 3.2e-13
[Fri Dec 30 23:19:04 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting