[Tue Jul  3 14:57:14 2012] Detection parameters:
  Position = (311.3, 292.2) = 1 4 4.37 -72 1 46.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40940.6 +/- 246.0
  Background counts = 26.0
  Rate = 2 +/- 0.01

[Tue Jul  3 14:57:14 2012] Off-axis axis estimate = 1.04'
[Tue Jul  3 15:54:38 2012] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 15:54:38 2012] Initial guess for spatial extent in simple fitting = 6.95"
[Tue Jul  3 15:54:38 2012] source mask rpix=1.6, npix_max = 17, mask sum = 13, frac = 0.739
[Tue Jul  3 15:54:38 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.95"
[Tue Jul  3 16:35:22 2012] fullrun_mos2_xmm0135721301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul  3 16:35:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135721301_pi300-10000_cl_pass0_src1.csv
[Tue Jul  3 16:35:22 2012] fullrun_mos2_xmm0135721301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul  3 16:35:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135721301_pi300-10000_cl_pass0_src1.csv
[Tue Jul  3 16:35:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0135721301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0135721301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 16:35:23 2012] fullrun_mos2_xmm0135721301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul  3 16:35:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135721301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jul  3 16:35:23 2012] fullrun_mos2_xmm0135721301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul  3 16:35:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135721301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jul  3 16:35:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0135721301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0135721301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 16:35:29 2012] Spatial fit model total counts = 98070.000000, observed total counts = 86304.000000
[Tue Jul  3 16:35:29 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul  3 16:35:29 2012] Spatial fit model total counts = 51321.300000, observed total counts = 55604.000000
[Tue Jul  3 16:35:29 2012] Offset between fit and detection position for source 5 = 3.495217 pixels
[Tue Jul  3 16:35:29 2012] Warning, changing simple spatial fit ID from 1 to 2
[Tue Jul  3 16:35:29 2012] 56957.300000 total counts/ 19757.400000 bgd. counts: snr = 264.653033
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 3.495217 pixels
  Position = (312.7, 289.0) = 1 4 3.06 -72 1 58.3
  Extent = 9.8 (9.8-9.8)", rotation angle = 0
  Source counts = 37199.9 +/- 238.7
  Background counts = 19757.4
  Rate = 1 +/- 0.008
[Tue Jul  3 16:35:30 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 16:35:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 16:35:30 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 16:35:30 2012] Source does appear to be extended
[Tue Jul  3 16:35:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 16:35:30 2012] Source is confused with source 2
[Tue Jul  3 16:35:30 2012] Source is confused with source 1
[Tue Jul  3 17:06:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul  3 17:06:49 2012] Initial guess for spatial extent in simple fitting = 9.82"
[Tue Jul  3 17:06:49 2012] source mask rpix=2.3, npix_max = 30, mask sum = 13, frac = 0.427
[Tue Jul  3 17:06:49 2012] Skipping simple spatial due to low active detector fraction
[Tue Jul  3 17:29:10 2012] Spatial fit model total counts = 59748.700000, observed total counts = 65186.000000
[Tue Jul  3 17:29:10 2012] Offset between fit and detection position for source 5 = 0.140208 pixels
[Tue Jul  3 17:29:10 2012] Warning, changing simple spatial fit ID from -1 to 1
[Tue Jul  3 17:29:10 2012] 68920.300000 total counts/ 23636.600000 bgd. counts: snr = 294.543472
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.140208 pixels
  Position = (312.6, 288.9) = 1 4 3.11 -72 1 58.8
  Extent = 11.7 (11.7-11.7)", rotation angle = 0
  Source counts = 45283.7 +/- 262.5
  Background counts = 23636.6
  Rate = 2 +/- 0.009
[Tue Jul  3 17:29:10 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 17:29:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 17:29:10 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 17:29:10 2012] Source does appear to be extended
[Tue Jul  3 17:29:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 19:11:18 2012] Counts = 45283.700000, rescaling region sizes by 3.000000
[Tue Jul  3 19:11:18 2012] XMMSAS src. selection expression = ellipse(27148.892800, 25082.460000, 2098.578886, 2098.578886, 0.000000, X, Y)
[Tue Jul  3 19:11:18 2012] Writing source region out to fullrun_mos2_xmm0135721301_pi300-10000_pass1_cl_src5_src.reg
[Tue Jul  3 19:11:18 2012] Extracting stamp from image fullrun_mos2_xmm0135721301_pi300-10000_cl_sm2.00.img.gz, (192, 168) - (433, 409)
[Tue Jul  3 19:11:18 2012] XMMSAS bgd. selection expression = annulus(27148.892800, 25082.460000, 10492.894431, 20985.788862, X, Y) && !ellipse(27487.000000, 24899.636780, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27029.979187, 24647.021362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31674.921082, 16318.521027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29511.407000, 25574.863800, 394.942411, 394.942411, 0.000000, X, Y) && !ellipse(40606.290955, 22156.084824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21013.288528, 13325.341888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16813.276443, 22824.455261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15075.712433, 21016.831665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14510.070400, 19947.200000, 1576.368045, 1576.368045, 0.000000, X, Y) && !ellipse(40358.644600, 34093.788400, 1436.848041, 1436.848041, 0.000000, X, Y)
[Tue Jul  3 19:11:18 2012] Writing fullrun_mos2_xmm0135721301_pi300-10000_pass1_cl_src5.gif
[Tue Jul  3 19:11:24 2012] Mean detx,y = (-281.91, -1628.34) 
[Tue Jul  3 19:11:25 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 19:17:36 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 19:17:36 2012] Setting source spectrum file to fullrun_mos2_xmm0135721301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Jul  3 19:17:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0135721301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Jul  3 19:42:11 2012] Updating aperture counts using extracted products
[Tue Jul  3 19:42:11 2012] Error reading totcts from fullrun_mos2_xmm0135721301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Jul  3 19:42:11 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 19:42:11 2012] Using photon index=1.80, rate=1.6, arf fullrun_mos2_xmm0135721301_pi300-10000_pass1_cl_src5.arf
[Tue Jul  3 19:42:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 19:42:11 2012] Updating source flux to 1.6e-11
[Tue Jul  3 19:42:57 2012] Flag p found in src. 5 procflags, skipping spectral fitting
[Tue Jul  3 19:42:57 2012] Flag c found in src. 5 procflags, skipping spectral fitting
[Tue Jul  3 19:43:49 2012] Reading fit data from xmm0135721301/analysis//spectral/fullrun_mos2_xmm0135721301_pi300-10000_pass1_cl_src5_pl.csv
[Tue Jul  3 19:43:49 2012] Spectral fit parameter nH value = 7.35703e+21
[Tue Jul  3 19:43:49 2012] Spectral fit parameter PhoIndex value = 7.49835
[Tue Jul  3 19:43:49 2012] Failed to get F(0.3-8.0) from xmm0135721301/analysis//spectral/fullrun_mos2_xmm0135721301_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Tue Jul  3 19:43:49 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 19:43:49 2012] Using Nh = 7.4e+21, photon index=7.50, rate=1.6, arf fullrun_mos2_xmm0135721301_pi300-10000_pass1_cl_src5.arf
[Tue Jul  3 19:43:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 19:43:49 2012] Updating source flux to 9.3e-12