[Wed Sep  5 13:52:52 2012] Detection parameters:
  Position = (298.1, 315.0) = 1 3 38.93 -72 0 29.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 350.1 +/- 27.4
  Background counts = 41.0
  Rate = 0.03 +/- 0.003

[Wed Sep  5 13:52:53 2012] Off-axis axis estimate = 1.20'
[Wed Sep  5 13:54:42 2012] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 13:54:42 2012] Initial guess for spatial extent in simple fitting = 7.03"
[Wed Sep  5 13:54:42 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.894
[Wed Sep  5 13:54:42 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.03"
[Wed Sep  5 16:25:09 2012] fullrun_pn_xmm0135721001_pi300-10000_cl_pass0_src23.ximg exists
[Wed Sep  5 16:25:09 2012] fullrun_pn_xmm0135721001_pi300-10000_cl_pass0_src23_1.ximg exists
[Wed Sep  5 16:25:09 2012] Fit fullrun_pn_xmm0135721001_pi300-10000_cl_pass0_src23 appears to have run properly
[Wed Sep  5 16:25:10 2012] fullrun_pn_xmm0135721001_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Wed Sep  5 16:25:10 2012] fullrun_pn_xmm0135721001_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Wed Sep  5 16:25:10 2012] Fit fullrun_pn_xmm0135721001_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Wed Sep  5 16:40:38 2012] Spatial fit model total counts = 1419.810000, observed total counts = 1423.000000
[Wed Sep  5 16:40:38 2012] Offset between fit and detection position for source 23 = 2.576503 pixels
[Wed Sep  5 16:40:38 2012] Warning, changing simple spatial fit ID from 23 to 22
[Wed Sep  5 16:40:38 2012] 1503.824000 total counts/ 794.630000 bgd. counts: snr = 25.158374
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 2.576503 pixels
  Position = (300.5, 315.8) = 1 3 36.65 -72 0 27.2
  Extent = 16.5 (16.2-33.0)" x 13.8 (12.3-15.4)", rotation angle = 315 (301-332) degrees
  Source counts = 709.2 +/- 38.8
  Background counts = 794.6
  Rate = 0.07 +/- 0.004
[Wed Sep  5 16:40:38 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 16:40:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 16:40:38 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 16:40:38 2012] Source does appear to be extended
[Wed Sep  5 16:40:38 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.05
[Wed Sep  5 16:40:38 2012] Source is confused with source 22
[Wed Sep  5 16:40:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 16:40:47 2012] Initial guess for spatial extent in simple fitting = 15.17"
[Wed Sep  5 16:40:47 2012] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.006
[Wed Sep  5 16:40:47 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 15.17"
[Wed Sep  5 19:22:06 2012] fullrun_pn_xmm0135721001_pi300-10000_cl_pass1_src21.ximg exists
[Wed Sep  5 19:22:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0135721001_pi300-10000_cl_pass1_src21.csv
[Wed Sep  5 19:22:06 2012] fullrun_pn_xmm0135721001_pi300-10000_cl_pass1_src21_1.ximg exists
[Wed Sep  5 19:22:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0135721001_pi300-10000_cl_pass1_src21.csv
[Wed Sep  5 19:22:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0135721001_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0135721001_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 19:22:06 2012] fullrun_pn_xmm0135721001_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Wed Sep  5 19:22:06 2012] fullrun_pn_xmm0135721001_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Wed Sep  5 19:22:06 2012] Fit fullrun_pn_xmm0135721001_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Wed Sep  5 19:38:31 2012] Spatial fit model total counts = 2105.830000, observed total counts = 2108.000000
[Wed Sep  5 19:38:31 2012] Offset between fit and detection position for source 23 = 2.362545 pixels
[Wed Sep  5 19:38:31 2012] Warning, changing simple spatial fit ID from 21 to 20
[Wed Sep  5 19:38:31 2012] 2131.911000 total counts/ 817.791000 bgd. counts: snr = 45.952999
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 2.362545 pixels
  Position = (298.3, 315.0) = 1 3 38.73 -72 0 30.8
  Extent = 38.1 (38.1-76.3)" x 13.6 (12.8-14.5)", rotation angle = 325 (322-328) degrees
  Source counts = 1314.1 +/- 46.2
  Background counts = 817.8
  Rate = 0.1 +/- 0.004
[Wed Sep  5 19:38:31 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 19:38:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 19:38:31 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 19:38:31 2012] Source does appear to be extended
[Wed Sep  5 19:38:31 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.63
[Wed Sep  5 19:38:31 2012] Source is asymmetric
[Wed Sep  5 19:38:40 2012] Counts = 1314.120000, rescaling region sizes by 2.000000
[Wed Sep  5 19:38:40 2012] XMMSAS src. selection expression = ellipse(25905.480000, 27355.324000, 4576.488132, 1635.696047, 324.659000, X, Y)
[Wed Sep  5 19:38:40 2012] Writing source region out to fullrun_pn_xmm0135721001_pi300-10000_pass1_cl_src23_src.reg
[Wed Sep  5 19:38:40 2012] Extracting stamp from image fullrun_pn_xmm0135721001_pi300-10000_cl_sm2.00.img.gz, (35, 52) - (561, 578)
[Wed Sep  5 19:38:40 2012] XMMSAS bgd. selection expression = annulus(25905.480000, 27355.324000, 15254.960439, 30509.920878, X, Y) && !ellipse(28171.378000, 16869.522000, 470.292014, 470.292014, 0.000000, X, Y) && !ellipse(38589.283783, 14304.255173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23737.921800, 25682.381800, 3138.576090, 3138.576090, 0.000000, X, Y) && !ellipse(34248.904000, 33678.778000, 2063.200059, 2063.200059, 0.000000, X, Y) && !ellipse(34242.530000, 33719.210000, 1838.952053, 1838.952053, 0.000000, X, Y) && !ellipse(33133.792000, 32836.702000, 1740.312050, 1740.312050, 0.000000, X, Y) && !ellipse(33252.618000, 33038.508000, 1637.280047, 1637.280047, 0.000000, X, Y) && !ellipse(16272.348740, 31768.009064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31485.119765, 31665.688670, 3184.848092, 1724.566740, 330.792693, X, Y) && !ellipse(30479.778000, 30785.354000, 3050.992088, 1326.288038, 158.379000, X, Y) && !ellipse(30824.390411, 9514.359299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30102.483106, 30495.462759, 3050.992088, 1194.378098, 319.259516, X, Y) && !ellipse(29676.431841, 30295.438365, 1390.560040, 1004.351226, 135.043648, X, Y) && !ellipse(28646.074280, 29357.980560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28053.909083, 28888.033507, 3050.992088, 1082.889457, 319.285088, X, Y) && !ellipse(21362.103622, 28800.966034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27534.124000, 28562.068000, 2327.824067, 2327.824067, 0.000000, X, Y) && !ellipse(27107.704000, 28229.090000, 1236.528036, 1236.528036, 0.000000, X, Y) && !ellipse(26310.784000, 27746.356000, 1124.440032, 1124.440032, 0.000000, X, Y) && !ellipse(33190.260468, 26923.735535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26008.030400, 26093.644600, 355.472810, 355.472810, 0.000000, X, Y) && !ellipse(22342.453278, 25788.516693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29605.384155, 24239.341614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22904.302612, 25101.742920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22070.920000, 23672.060000, 1278.880037, 1278.880037, 0.000000, X, Y) && !ellipse(29564.581665, 23388.858734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37106.935791, 22761.406281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11596.573800, 21522.966600, 1200.800035, 1200.800035, 0.000000, X, Y) && !ellipse(11250.189600, 20988.244000, 2075.880060, 1028.960030, 110.230200, X, Y) && !ellipse(15399.465378, 11753.645523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35141.980000, 34449.752000, 3240.864093, 3240.864093, 0.000000, X, Y)
[Wed Sep  5 19:38:40 2012] Writing fullrun_pn_xmm0135721001_pi300-10000_pass1_cl_src23.gif
[Wed Sep  5 20:51:24 2012] Mean detx,y = (216.12, 1776.65) 
[Wed Sep  5 20:51:28 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Sep  5 20:57:26 2012] grppha failed
[Wed Sep  5 20:57:27 2012] Setting source spectrum file to fullrun_pn_xmm0135721001_pi300-10000_pass1_cl_src23_src.pi.gz
[Wed Sep  5 20:57:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0135721001_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Wed Sep  5 21:16:29 2012] Updating aperture counts using extracted products
[Wed Sep  5 21:16:29 2012] Error reading totcts from fullrun_pn_xmm0135721001_pi300-10000_pass1_cl_src23_src.pi.gz
[Wed Sep  5 21:16:30 2012] No arf file for this source, not re-computing flux
[Wed Sep  5 21:16:33 2012] Flag c found in src. 23 procflags, skipping spectral fitting
[Wed Sep  5 21:16:33 2012] Source 23 has no response, skipping
[Wed Sep  5 21:16:34 2012] xmm0135721001/analysis//spectral/fullrun_pn_xmm0135721001_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete