[Sat Jun 23 15:10:53 2012] Detection parameters:
  Position = (325.1, 313.0) = 4 33 36.35 -13 15 45.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7147.7 +/- 117.3
  Background counts = 399.2
  Rate = 0.3 +/- 0.004

[Sat Jun 23 15:10:54 2012] Off-axis axis estimate = 2.20'
[Sat Jun 23 18:07:14 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 18:07:14 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Sat Jun 23 18:07:14 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.753
[Sat Jun 23 18:07:14 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.53"
[Sat Jun 23 20:02:33 2012] fullrun_mos2_xmm0135120201_pi300-10000_cl_pass0_src2.ximg exists
[Sat Jun 23 20:02:33 2012] fullrun_mos2_xmm0135120201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Jun 23 20:02:33 2012] Fit fullrun_mos2_xmm0135120201_pi300-10000_cl_pass0_src2 appears to have run properly
[Sat Jun 23 20:02:33 2012] fullrun_mos2_xmm0135120201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Jun 23 20:02:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135120201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jun 23 20:02:33 2012] fullrun_mos2_xmm0135120201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jun 23 20:02:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135120201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jun 23 20:02:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0135120201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0135120201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 20:02:55 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.444664 pixels away
[Sat Jun 23 20:02:55 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 20:02:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 20:02:55 2012] Assessing source extent using major
[Sat Jun 23 20:02:55 2012] Source does appear to be extended
[Sat Jun 23 20:02:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 20:02:55 2012] Source is confused with source 2
[Sat Jun 23 21:40:30 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 21:40:30 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Sat Jun 23 21:40:30 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.753
[Sat Jun 23 21:40:30 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.53"
[Sat Jun 23 23:28:23 2012] fullrun_mos2_xmm0135120201_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jun 23 23:28:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135120201_pi300-10000_cl_pass1_src2.csv
[Sat Jun 23 23:28:23 2012] fullrun_mos2_xmm0135120201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jun 23 23:28:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135120201_pi300-10000_cl_pass1_src2.csv
[Sat Jun 23 23:28:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0135120201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0135120201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 23:28:24 2012] fullrun_mos2_xmm0135120201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jun 23 23:28:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135120201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun 23 23:28:24 2012] fullrun_mos2_xmm0135120201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jun 23 23:28:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0135120201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun 23 23:28:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0135120201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0135120201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 23:28:41 2012] Warning, spatial fit 2 centroid is now closest to src. 2
[Sat Jun 23 23:28:41 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 23:28:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 23:28:41 2012] Assessing source extent using major
[Sat Jun 23 23:28:41 2012] Source does appear to be extended
[Sat Jun 23 23:28:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 13:54:52 2012] Counts = 7147.729492, rescaling region sizes by 2.000000
[Sun Jun 24 13:54:52 2012] XMMSAS src. selection expression = ellipse(28235.248322, 27183.970886, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun 24 13:54:52 2012] Writing source region out to fullrun_mos2_xmm0135120201_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 24 13:54:52 2012] Extracting stamp from image fullrun_mos2_xmm0135120201_pi300-10000_cl_sm2.00.img.gz, (250, 238) - (400, 388)
[Sun Jun 24 13:54:52 2012] XMMSAS bgd. selection expression = annulus(28235.248322, 27183.970886, 4350.000000, 8700.000000, X, Y) && !ellipse(27617.022095, 27361.794128, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25727.058075, 27092.271484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27202.919830, 24587.729248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26674.006134, 25014.023407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28000.742000, 25285.684000, 1192.936034, 1192.936034, 0.000000, X, Y) && !ellipse(27578.741882, 24044.892578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29595.024231, 26099.999420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25890.461853, 25539.185547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25530.944336, 28221.115601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25649.278992, 28846.988312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26194.048523, 24402.856903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25939.229431, 21151.703171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28544.902000, 23498.996000, 1215.192035, 1215.192035, 0.000000, X, Y) && !ellipse(25785.139496, 29454.857269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35494.726800, 20807.077400, 496.777614, 496.777614, 0.000000, X, Y) && !ellipse(25030.784607, 25434.957062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26811.993317, 23794.435699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29159.791800, 23943.240000, 1163.024033, 1163.024033, 0.000000, X, Y) && !ellipse(26346.630402, 23209.259277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.706207, 28031.496063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26324.981293, 23625.387329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30109.635284, 26829.896179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26541.565308, 23285.501099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25676.227539, 24238.191986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27918.999817, 23272.361359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26194.244995, 29792.815948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25350.642000, 25089.642000, 1053.712030, 1053.712030, 0.000000, X, Y) && !ellipse(26344.410797, 30322.648285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30215.614000, 24886.390000, 1286.216037, 1286.216037, 0.000000, X, Y)
[Sun Jun 24 13:54:52 2012] Writing fullrun_mos2_xmm0135120201_pi300-10000_pass1_cl_src1.gif
[Sun Jun 24 14:06:01 2012] Mean detx,y = (-716.14, 46.16) 
[Sun Jun 24 14:06:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 14:10:01 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 14:10:02 2012] Setting source spectrum file to fullrun_mos2_xmm0135120201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 24 14:10:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0135120201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 24 14:22:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 24 14:22:40 2012] rmf not generated due to insufficient counts
[Sun Jun 24 15:09:04 2012] Updating aperture counts using extracted products
[Sun Jun 24 15:09:04 2012] Error reading totcts from fullrun_mos2_xmm0135120201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 24 15:09:05 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 15:09:05 2012] Using photon index=1.80, rate=0.265, arf fullrun_mos2_xmm0135120201_pi300-10000_pass1_cl_src1.arf
[Sun Jun 24 15:09:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 15:09:05 2012] Updating source flux to 2.4e-12
[Sun Jun 24 15:11:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 24 15:12:39 2012] xmm0135120201/analysis//spectral/fullrun_mos2_xmm0135120201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete