[Mon Jul 16 01:58:54 2012] Detection parameters:
  Position = (162.2, 437.0) = 5 17 31.03 46 10 57.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.1 +/- 16.8
  Background counts = 55.7
  Rate = 0.008 +/- 0.001

[Mon Jul 16 01:58:58 2012] Off-axis axis estimate = 14.09'
[Mon Jul 16 02:01:54 2012] Using EEF radius (= 13.47 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 02:01:54 2012] Initial guess for spatial extent in simple fitting = 13.47"
[Mon Jul 16 02:01:54 2012] source mask rpix=3.1, npix_max = 51, mask sum = 40, frac = 0.773
[Mon Jul 16 02:01:54 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 13.47"
[Mon Jul 16 09:12:28 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_src37.ximg exists
[Mon Jul 16 09:12:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_src37.csv
[Mon Jul 16 09:12:28 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_src37_1.ximg exists
[Mon Jul 16 09:12:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_src37.csv
[Mon Jul 16 09:12:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 09:12:31 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Mon Jul 16 09:12:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_tfrozen_src37.csv
[Mon Jul 16 09:12:31 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Mon Jul 16 09:12:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_tfrozen_src37.csv
[Mon Jul 16 09:12:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 09:12:59 2012] Warning, spatial fit 37 centroid is now closest to src. 53
[Mon Jul 16 09:13:00 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 09:13:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 09:13:00 2012] Assessing source extent using major
[Mon Jul 16 09:13:00 2012] Source does appear to be extended
[Mon Jul 16 09:13:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 09:13:00 2012] Source is confused with source 33
[Mon Jul 16 09:13:21 2012] Using EEF radius (= 13.47 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 09:13:21 2012] Initial guess for spatial extent in simple fitting = 13.47"
[Mon Jul 16 09:13:21 2012] source mask rpix=3.1, npix_max = 51, mask sum = 40, frac = 0.773
[Mon Jul 16 09:13:21 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 13.47"
[Mon Jul 16 17:24:01 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_src33.ximg exists
[Mon Jul 16 17:24:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_src33.csv
[Mon Jul 16 17:24:01 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_src33_1.ximg exists
[Mon Jul 16 17:24:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_src33.csv
[Mon Jul 16 17:24:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 17:24:03 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Mon Jul 16 17:24:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_tfrozen_src33.csv
[Mon Jul 16 17:24:03 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Mon Jul 16 17:24:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_tfrozen_src33.csv
[Mon Jul 16 17:24:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 17:24:32 2012] Spatial fit model total counts = 4420.380000, observed total counts = 5059.000000
[Mon Jul 16 17:24:32 2012] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 16 17:24:32 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 22.856659 pixels away
[Mon Jul 16 17:24:32 2012] Source 38 is offset by 6.113276 and 0.073187 pixels which is larger than
2 X fitted extent = 1.492409 x 1.492409, not incorporating fit results
[Mon Jul 16 17:24:32 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 17:24:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 17:24:32 2012] Assessing source extent using major
[Mon Jul 16 17:24:32 2012] Source does appear to be extended
[Mon Jul 16 17:24:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 17:25:00 2012] XMMSAS src. selection expression = ellipse(14060.638977, 37971.583252, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 16 17:25:00 2012] Writing source region out to fullrun_mos2_xmm0134720401_pi300-10000_pass1_cl_src38_src.reg
[Mon Jul 16 17:25:00 2012] Extracting stamp from image fullrun_mos2_xmm0134720401_pi300-10000_cl_sm2.00.img.gz, (125, 400) - (200, 475)
[Mon Jul 16 17:25:00 2012] XMMSAS bgd. selection expression = annulus(14060.638977, 37971.583252, 1087.500000, 2175.000000, X, Y) && !ellipse(16300.074000, 39137.498000, 2099.168060, 2099.168060, 0.000000, X, Y) && !ellipse(15411.324000, 38781.524000, 3011.480087, 3011.480087, 0.000000, X, Y) && !ellipse(15183.600000, 38633.180000, 2141.912062, 2141.912062, 0.000000, X, Y) && !ellipse(14537.188000, 38176.148000, 2137.848062, 2137.848062, 0.000000, X, Y) && !ellipse(14640.476000, 37927.422000, 2070.360060, 941.120027, 47.584000, X, Y) && !ellipse(16197.827377, 37634.795441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15369.304245, 37446.983978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14046.943008, 37016.903748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14599.782501, 36846.148193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14849.164093, 36496.560486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13654.001328, 36147.225006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16453.119064, 38154.772308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16478.851608, 37269.803253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15415.881424, 36936.493530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14063.891388, 35294.947327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13309.803329, 34952.408722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17763.428000, 39513.730000, 4198.336121, 4198.336121, 0.000000, X, Y) && !ellipse(15261.541916, 36499.433228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16150.559891, 36594.626648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14075.361115, 36495.668396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15279.751434, 35973.479889, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 16 17:25:00 2012] Writing fullrun_mos2_xmm0134720401_pi300-10000_pass1_cl_src38.gif
[Mon Jul 16 18:00:25 2012] Mean detx,y = (-12874.08, -10591.13) 
[Mon Jul 16 18:00:26 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 18:00:34 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 18:00:34 2012] Setting source spectrum file to fullrun_mos2_xmm0134720401_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon Jul 16 18:00:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0134720401_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Mon Jul 16 19:43:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 16 19:43:36 2012] rmf not generated due to insufficient counts
[Mon Jul 16 19:45:34 2012] Updating aperture counts using extracted products
[Mon Jul 16 19:45:34 2012] Error reading totcts from fullrun_mos2_xmm0134720401_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon Jul 16 19:45:37 2012] No arf file for this source, not re-computing flux
[Mon Jul 16 19:45:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jul 16 19:45:41 2012] xmm0134720401/analysis//spectral/fullrun_mos2_xmm0134720401_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete