[Mon Jul 16 01:58:53 2012] Detection parameters:
  Position = (400.4, 433.2) = 5 15 51.24 46 10 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.9 +/- 16.8
  Background counts = 21.5
  Rate = 0.009 +/- 0.001

[Mon Jul 16 01:58:58 2012] Off-axis axis estimate = 12.25'
[Mon Jul 16 02:01:54 2012] Using EEF radius (= 12.55 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 02:01:54 2012] Initial guess for spatial extent in simple fitting = 12.55"
[Mon Jul 16 02:01:54 2012] source mask rpix=2.9, npix_max = 45, mask sum = 47, frac = 1.025
[Mon Jul 16 02:01:54 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 12.55"
[Mon Jul 16 09:12:28 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_src33.ximg exists
[Mon Jul 16 09:12:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_src33.csv
[Mon Jul 16 09:12:28 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_src33_1.ximg exists
[Mon Jul 16 09:12:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_src33.csv
[Mon Jul 16 09:12:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 09:12:31 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Mon Jul 16 09:12:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_tfrozen_src33.csv
[Mon Jul 16 09:12:31 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Mon Jul 16 09:12:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_tfrozen_src33.csv
[Mon Jul 16 09:12:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 09:12:59 2012] Source 34 is offset by -4.280795 and -0.859742 pixels which is larger than
2 X fitted extent = 1.444143 x 1.444143, not incorporating fit results
[Mon Jul 16 09:12:59 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 13.654831 pixels away
[Mon Jul 16 09:12:59 2012] Spatial fit model total counts = 1108.430000, observed total counts = 1077.000000
[Mon Jul 16 09:12:59 2012] Offset between fit and detection position for source 34 = 5.507173 pixels
[Mon Jul 16 09:12:59 2012] Warning, changing simple spatial fit ID from 33 to 43
[Mon Jul 16 09:12:59 2012] 1012.492000 total counts/ 508.572000 bgd. counts: snr = 22.345258
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 5.507173 pixels
  Position = (395.4, 435.3) = 5 15 53.36 46 10 48.2
  Extent = 24.3 (23.2-24.9)", rotation angle = 0
  Source counts = 503.9 +/- 31.8
  Background counts = 508.6
  Rate = 0.04 +/- 0.002
[Mon Jul 16 09:13:00 2012] Spatial fit model total counts = 735.030000, observed total counts = 817.000000
[Mon Jul 16 09:13:00 2012] Poor agreement between spatial fit and data for source 34
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 16 09:13:00 2012] Source 34 is offset by -1.269494 and 3.961540 pixels which is larger than
2 X fitted extent = 1.419186 x 1.419186, not incorporating fit results
[Mon Jul 16 09:13:00 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 09:13:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 09:13:00 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 09:13:00 2012] Source does appear to be extended
[Mon Jul 16 09:13:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 09:13:00 2012] Source is confused with source 9
[Mon Jul 16 09:13:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 16 09:13:21 2012] Initial guess for spatial extent in simple fitting = 24.33"
[Mon Jul 16 09:13:21 2012] source mask rpix=5.6, npix_max = 148, mask sum = 137, frac = 0.923
[Mon Jul 16 09:13:21 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 24.33"
[Mon Jul 16 17:24:01 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_src30.ximg exists
[Mon Jul 16 17:24:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_src30.csv
[Mon Jul 16 17:24:01 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_src30_1.ximg exists
[Mon Jul 16 17:24:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_src30.csv
[Mon Jul 16 17:24:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 17:24:03 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Mon Jul 16 17:24:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_tfrozen_src30.csv
[Mon Jul 16 17:24:03 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Mon Jul 16 17:24:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_tfrozen_src30.csv
[Mon Jul 16 17:24:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 17:24:32 2012] Warning, spatial fit 30 centroid is now closest to src. 24
[Mon Jul 16 17:24:32 2012] Spatial fit model total counts = 1107.030000, observed total counts = 1077.000000
[Mon Jul 16 17:24:32 2012] Offset between fit and detection position for source 34 = 0.287483 pixels
[Mon Jul 16 17:24:32 2012] Warning, changing simple spatial fit ID from 30 to 38
[Mon Jul 16 17:24:32 2012] 1023.701000 total counts/ 537.516000 bgd. counts: snr = 20.970359
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.287483 pixels
  Position = (395.6, 435.2) = 5 15 53.25 46 10 47.5
  Extent = 24.9 (24.9-49.8)", rotation angle = 0
  Source counts = 486.2 +/- 32.0
  Background counts = 537.5
  Rate = 0.03 +/- 0.002
[Mon Jul 16 17:24:32 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 17:24:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 17:24:32 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 17:24:32 2012] Source does appear to be extended
[Mon Jul 16 17:24:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 17:25:00 2012] XMMSAS src. selection expression = ellipse(34370.946000, 37811.378000, 1493.418043, 1493.418043, 0.000000, X, Y)
[Mon Jul 16 17:25:00 2012] Writing source region out to fullrun_mos2_xmm0134720401_pi300-10000_pass1_cl_src34_src.reg
[Mon Jul 16 17:25:00 2012] Extracting stamp from image fullrun_mos2_xmm0134720401_pi300-10000_cl_sm2.00.img.gz, (310, 349) - (481, 521)
[Mon Jul 16 17:25:00 2012] XMMSAS bgd. selection expression = annulus(34370.946000, 37811.378000, 2489.030072, 4978.060143, X, Y) && !ellipse(32623.116200, 38366.336400, 965.088028, 965.088028, 0.000000, X, Y) && !ellipse(31097.810638, 38230.626495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34230.526000, 38293.450000, 1952.392056, 1952.392056, 0.000000, X, Y) && !ellipse(33742.690000, 38076.608000, 2003.168058, 2003.168058, 0.000000, X, Y) && !ellipse(31975.086000, 36879.774000, 1853.128053, 1853.128053, 0.000000, X, Y) && !ellipse(32729.225250, 39100.374268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29217.521545, 39098.029877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30721.040000, 39210.750000, 1240.192036, 1240.192036, 0.000000, X, Y) && !ellipse(29094.168884, 38306.156769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31470.353729, 37784.342621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30598.009338, 37962.765900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30014.428589, 37798.177979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34816.357056, 37285.664398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32677.186676, 37442.690796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32090.231384, 37278.259521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33866.605286, 37264.732147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30828.580048, 36930.163940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36157.222000, 36409.130000, 1894.776055, 1894.776055, 0.000000, X, Y) && !ellipse(33535.350555, 36242.543213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34491.466431, 36490.026459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30911.422272, 39528.861481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31919.588000, 39457.388200, 1994.792057, 1994.792057, 0.000000, X, Y) && !ellipse(32340.215668, 39009.346588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33333.172000, 38923.996000, 2528.672073, 2528.672073, 0.000000, X, Y) && !ellipse(33231.957703, 38571.893341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28904.174988, 37104.394928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32704.793671, 36590.118408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31743.558899, 36331.014099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35490.997345, 36406.645264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35105.234863, 36057.925751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30063.711243, 39447.439697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29159.010010, 39624.952301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29461.755035, 37796.898254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28865.225708, 37893.936920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33182.921967, 37269.104980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32744.701416, 37020.235809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35023.765289, 36762.902405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28702.164429, 36488.821075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32289.850000, 35922.778000, 3706.256107, 3706.256107, 0.000000, X, Y) && !ellipse(28593.985260, 36060.453339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30692.817780, 36062.842865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29603.820343, 35751.591125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33391.832947, 35602.264313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34678.422974, 35294.384460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29953.700104, 40020.259613, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 16 17:25:00 2012] Writing fullrun_mos2_xmm0134720401_pi300-10000_pass1_cl_src34.gif
[Mon Jul 16 17:58:15 2012] Mean detx,y = (6504.03, -14627.94) 
[Mon Jul 16 17:58:17 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 17:58:48 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 17:58:48 2012] Setting source spectrum file to fullrun_mos2_xmm0134720401_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Mon Jul 16 17:58:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0134720401_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Mon Jul 16 19:45:34 2012] Updating aperture counts using extracted products
[Mon Jul 16 19:45:34 2012] Error reading totcts from fullrun_mos2_xmm0134720401_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Mon Jul 16 19:45:37 2012] No arf file for this source, not re-computing flux
[Mon Jul 16 19:45:40 2012] Flag b found in src. 34 procflags, skipping spectral fitting
[Mon Jul 16 19:45:40 2012] Flag p found in src. 34 procflags, skipping spectral fitting
[Mon Jul 16 19:45:40 2012] Flag c found in src. 34 procflags, skipping spectral fitting
[Mon Jul 16 19:45:40 2012] Source 34 has no response, skipping
[Mon Jul 16 19:45:41 2012] xmm0134720401/analysis//spectral/fullrun_mos2_xmm0134720401_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete