[Mon Jul 16 01:58:53 2012] Detection parameters:
  Position = (389.4, 433.1) = 5 15 55.87 46 10 40.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.6 +/- 19.5
  Background counts = 19.8
  Rate = 0.01 +/- 0.001

[Mon Jul 16 01:58:58 2012] Off-axis axis estimate = 11.78'
[Mon Jul 16 02:01:54 2012] Using EEF radius (= 12.32 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 02:01:54 2012] Initial guess for spatial extent in simple fitting = 12.32"
[Mon Jul 16 02:01:54 2012] source mask rpix=2.8, npix_max = 44, mask sum = 39, frac = 0.878
[Mon Jul 16 02:01:54 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 12.32"
[Mon Jul 16 09:12:28 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_src9.ximg exists
[Mon Jul 16 09:12:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_src9.csv
[Mon Jul 16 09:12:28 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon Jul 16 09:12:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_src9.csv
[Mon Jul 16 09:12:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 09:12:30 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon Jul 16 09:12:30 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Jul 16 09:12:30 2012] Fit fullrun_mos2_xmm0134720401_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Jul 16 09:12:59 2012] Warning, spatial fit 9 centroid is now closest to src. 9
[Mon Jul 16 09:13:00 2012] Spatial fit model total counts = 1083.210000, observed total counts = 1044.000000
[Mon Jul 16 09:13:00 2012] Offset between fit and detection position for source 10 = 4.690509 pixels
[Mon Jul 16 09:13:00 2012] Warning, changing simple spatial fit ID from 9 to 83
[Mon Jul 16 09:13:00 2012] 949.079000 total counts/ 831.907000 bgd. counts: snr = 4.062435
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 4.690509 pixels
  Position = (387.2, 437.3) = 5 15 56.78 46 10 56.7
  Extent = 15.8 (7.3-25.0)", rotation angle = 0
  Source counts = 117.2 +/- 30.8
  Background counts = 831.9
  Rate = 0.008 +/- 0.002
[Mon Jul 16 09:13:00 2012] Source 10 is offset by 0.442736 and 4.507586 pixels which is larger than
2 X fitted extent = 1.344795 x 1.344795, not incorporating fit results
[Mon Jul 16 09:13:00 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 09:13:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 09:13:00 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 09:13:00 2012] Source does appear to be extended
[Mon Jul 16 09:13:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 09:13:00 2012] Source is confused with source 9
[Mon Jul 16 09:13:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 16 09:13:21 2012] Initial guess for spatial extent in simple fitting = 15.80"
[Mon Jul 16 09:13:21 2012] source mask rpix=3.6, npix_max = 68, mask sum = 62, frac = 0.907
[Mon Jul 16 09:13:21 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 15.80"
[Mon Jul 16 17:24:00 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_src9.ximg exists
[Mon Jul 16 17:24:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_src9.csv
[Mon Jul 16 17:24:00 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon Jul 16 17:24:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_src9.csv
[Mon Jul 16 17:24:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 17:24:02 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon Jul 16 17:24:02 2012] fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Jul 16 17:24:02 2012] Fit fullrun_mos2_xmm0134720401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Jul 16 17:24:32 2012] Warning, spatial fit 9 centroid is now closest to src. 83
[Mon Jul 16 17:24:32 2012] Spatial fit model total counts = 1072.110000, observed total counts = 1044.000000
[Mon Jul 16 17:24:32 2012] Offset between fit and detection position for source 10 = 1.535456 pixels
[Mon Jul 16 17:24:32 2012] Warning, changing simple spatial fit ID from 9 to 74
[Mon Jul 16 17:24:32 2012] 874.904000 total counts/ 403.111000 bgd. counts: snr = 23.498447
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.535456 pixels
  Position = (388.4, 438.2) = 5 15 56.28 46 11 0.9
  Extent = 25.0 (24.4-50.1)", rotation angle = 0
  Source counts = 471.8 +/- 29.6
  Background counts = 403.1
  Rate = 0.03 +/- 0.002
[Mon Jul 16 17:24:32 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 17:24:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 17:24:32 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 17:24:32 2012] Source does appear to be extended
[Mon Jul 16 17:24:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 17:24:58 2012] XMMSAS src. selection expression = ellipse(33742.690000, 38076.608000, 1502.376043, 1502.376043, 0.000000, X, Y)
[Mon Jul 16 17:24:58 2012] Writing source region out to fullrun_mos2_xmm0134720401_pi300-10000_pass1_cl_src10_src.reg
[Mon Jul 16 17:24:58 2012] Extracting stamp from image fullrun_mos2_xmm0134720401_pi300-10000_cl_sm2.00.img.gz, (302, 352) - (475, 525)
[Mon Jul 16 17:24:58 2012] XMMSAS bgd. selection expression = annulus(33742.690000, 38076.608000, 2503.960072, 5007.920144, X, Y) && !ellipse(32623.116200, 38366.336400, 965.088028, 965.088028, 0.000000, X, Y) && !ellipse(31097.810638, 38230.626495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34230.526000, 38293.450000, 1952.392056, 1952.392056, 0.000000, X, Y) && !ellipse(31975.086000, 36879.774000, 1853.128053, 1853.128053, 0.000000, X, Y) && !ellipse(32729.225250, 39100.374268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29217.521545, 39098.029877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30721.040000, 39210.750000, 1240.192036, 1240.192036, 0.000000, X, Y) && !ellipse(29094.168884, 38306.156769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34370.946000, 37811.378000, 1991.224057, 1991.224057, 0.000000, X, Y) && !ellipse(31470.353729, 37784.342621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30598.009338, 37962.765900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30014.428589, 37798.177979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34816.357056, 37285.664398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32677.186676, 37442.690796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32090.231384, 37278.259521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33866.605286, 37264.732147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30828.580048, 36930.163940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36157.222000, 36409.130000, 1894.776055, 1894.776055, 0.000000, X, Y) && !ellipse(33535.350555, 36242.543213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34491.466431, 36490.026459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30911.422272, 39528.861481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31919.588000, 39457.388200, 1994.792057, 1994.792057, 0.000000, X, Y) && !ellipse(32340.215668, 39009.346588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28517.260223, 39117.408936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33333.172000, 38923.996000, 2528.672073, 2528.672073, 0.000000, X, Y) && !ellipse(33231.957703, 38571.893341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27987.202209, 38664.211365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28904.174988, 37104.394928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32704.793671, 36590.118408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31743.558899, 36331.014099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35490.997345, 36406.645264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35105.234863, 36057.925751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30063.711243, 39447.439697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29159.010010, 39624.952301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29461.755035, 37796.898254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28865.225708, 37893.936920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33182.921967, 37269.104980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28431.030182, 37446.726440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32744.701416, 37020.235809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28153.476074, 37018.693237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35023.765289, 36762.902405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28702.164429, 36488.821075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28081.546021, 36308.210052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32289.850000, 35922.778000, 3706.256107, 3706.256107, 0.000000, X, Y) && !ellipse(28593.985260, 36060.453339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30692.817780, 36062.842865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29603.820343, 35751.591125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33391.832947, 35602.264313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34678.422974, 35294.384460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29953.700104, 40020.259613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27990.223633, 38137.198669, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 16 17:24:58 2012] Writing fullrun_mos2_xmm0134720401_pi300-10000_pass1_cl_src10.gif
[Mon Jul 16 17:32:36 2012] Mean detx,y = (5879.72, -14822.50) 
[Mon Jul 16 17:32:38 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 17:33:12 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 17:33:12 2012] Setting source spectrum file to fullrun_mos2_xmm0134720401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jul 16 17:33:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0134720401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Jul 16 19:45:33 2012] Updating aperture counts using extracted products
[Mon Jul 16 19:45:33 2012] Error reading totcts from fullrun_mos2_xmm0134720401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jul 16 19:45:37 2012] No arf file for this source, not re-computing flux
[Mon Jul 16 19:45:40 2012] Flag b found in src. 10 procflags, skipping spectral fitting
[Mon Jul 16 19:45:40 2012] Flag c found in src. 10 procflags, skipping spectral fitting
[Mon Jul 16 19:45:40 2012] Source 10 has no response, skipping
[Mon Jul 16 19:45:41 2012] xmm0134720401/analysis//spectral/fullrun_mos2_xmm0134720401_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete