[Thu Mar 15 20:55:05 2012] Detection parameters:
  Position = (324.0, 307.9) = 5 16 36.79 45 59 38.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1246.0 +/- 58.1
  Background counts = 21.6
  Rate = 0.04 +/- 0.002

[Thu Mar 15 20:55:05 2012] Off-axis axis estimate = 1.97'
[Thu Mar 15 22:13:43 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 22:13:43 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Thu Mar 15 22:13:43 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.823
[Thu Mar 15 22:13:43 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.42"
[Thu Mar 15 23:33:33 2012] fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Mar 15 23:33:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_src3.csv
[Thu Mar 15 23:33:33 2012] fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Mar 15 23:33:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_src3.csv
[Thu Mar 15 23:33:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 23:33:34 2012] fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Mar 15 23:33:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Mar 15 23:33:34 2012] fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Mar 15 23:33:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Mar 15 23:33:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 23:33:43 2012] Warning, spatial fit 3 centroid is now closest to src. 3
[Thu Mar 15 23:33:43 2012] Source 5 is offset by -6.911856 and 1.808767 pixels which is larger than
2 X fitted extent = 0.858989 x 0.858989, not incorporating fit results
[Thu Mar 15 23:33:43 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 23:33:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 23:33:43 2012] Assessing source extent using major
[Thu Mar 15 23:33:43 2012] Source does appear to be extended
[Thu Mar 15 23:33:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 23:33:43 2012] Source is confused with source 3
[Thu Mar 15 23:33:43 2012] Source is confused with source 7
[Fri Mar 16 05:43:01 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 05:43:01 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Fri Mar 16 05:43:01 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.823
[Fri Mar 16 05:43:01 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.42"
[Fri Mar 16 06:30:12 2012] fullrun_mos2_xmm0134720101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Mar 16 06:30:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720101_pi300-10000_cl_pass1_src3.csv
[Fri Mar 16 06:30:12 2012] fullrun_mos2_xmm0134720101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Mar 16 06:30:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720101_pi300-10000_cl_pass1_src3.csv
[Fri Mar 16 06:30:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134720101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134720101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 06:30:12 2012] fullrun_mos2_xmm0134720101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Mar 16 06:30:12 2012] fullrun_mos2_xmm0134720101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Mar 16 06:30:12 2012] Fit fullrun_mos2_xmm0134720101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Mar 16 06:30:16 2012] Source 5 is offset by -6.852062 and 1.790032 pixels which is larger than
2 X fitted extent = 5.258667 x 5.258667, not incorporating fit results
[Fri Mar 16 06:30:16 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 06:30:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 06:30:16 2012] Assessing source extent using major
[Fri Mar 16 06:30:16 2012] Source does appear to be extended
[Fri Mar 16 06:30:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 07:42:26 2012] Counts = 1246.024414, rescaling region sizes by 2.000000
[Fri Mar 16 07:42:26 2012] XMMSAS src. selection expression = ellipse(28136.024567, 26742.006744, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Mar 16 07:42:26 2012] Writing source region out to fullrun_mos2_xmm0134720101_pi300-10000_pass1_cl_src5_src.reg
[Fri Mar 16 07:42:26 2012] Extracting stamp from image fullrun_mos2_xmm0134720101_pi300-10000_cl_sm2.00.img.gz, (249, 233) - (399, 383)
[Fri Mar 16 07:42:26 2012] XMMSAS bgd. selection expression = annulus(28136.024567, 26742.006744, 4350.000000, 8700.000000, X, Y) && !ellipse(27380.678000, 26897.322000, 1321.576838, 1321.576838, 0.000000, X, Y) && !ellipse(28007.369812, 26234.925354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28127.844421, 27094.971649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27941.925995, 25599.837036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28064.439667, 28160.506592, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 16 07:42:26 2012] Writing fullrun_mos2_xmm0134720101_pi300-10000_pass1_cl_src5.gif
[Fri Mar 16 07:48:59 2012] Mean detx,y = (-67.25, -471.82) 
[Fri Mar 16 07:49:02 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 07:52:05 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 07:52:05 2012] Setting source spectrum file to fullrun_mos2_xmm0134720101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Mar 16 07:52:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0134720101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Mar 16 08:01:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 16 08:01:14 2012] rmf not generated due to insufficient counts
[Fri Mar 16 08:07:49 2012] Updating aperture counts using extracted products
[Fri Mar 16 08:07:49 2012] Error reading totcts from fullrun_mos2_xmm0134720101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Mar 16 08:07:49 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 08:07:49 2012] Using photon index=1.80, rate=0.0437, arf fullrun_mos2_xmm0134720101_pi300-10000_pass1_cl_src5.arf
[Fri Mar 16 08:07:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 08:07:49 2012] Updating source flux to 4.8e-13
[Fri Mar 16 08:10:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting