[Thu Mar 15 20:55:05 2012] Detection parameters:
  Position = (335.4, 279.1) = 5 16 32.04 45 57 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.5 +/- 10.7
  Background counts = 20.7
  Rate = 0.002 +/- 0.0005

[Thu Mar 15 20:55:05 2012] Off-axis axis estimate = 3.02'
[Thu Mar 15 22:13:43 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 22:13:43 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Thu Mar 15 22:13:43 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.740
[Thu Mar 15 22:13:43 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 7.94"
[Thu Mar 15 23:33:34 2012] fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_src14.ximg exists
[Thu Mar 15 23:33:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_src14.csv
[Thu Mar 15 23:33:34 2012] fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu Mar 15 23:33:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_src14.csv
[Thu Mar 15 23:33:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 23:33:34 2012] fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu Mar 15 23:33:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Thu Mar 15 23:33:34 2012] fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu Mar 15 23:33:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Thu Mar 15 23:33:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134720101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 23:33:43 2012] Source 20 is offset by -6.920399 and -5.879982 pixels which is larger than
2 X fitted extent = 5.750943 x 5.750943, not incorporating fit results
[Thu Mar 15 23:33:43 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 23:33:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 23:33:43 2012] Assessing source extent using major
[Thu Mar 15 23:33:43 2012] Source does appear to be extended
[Thu Mar 15 23:33:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 23:33:43 2012] Deleting source due to low Poisson probability 0.8