[Sun Aug  5 14:05:40 2012] Detection parameters:
  Position = (351.6, 277.2) = 7 48 24.08 -67 46 39.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.8 +/- 12.9
  Background counts = 12.3
  Rate = 0.02 +/- 0.005

[Sun Aug  5 14:05:40 2012] Off-axis axis estimate = 4.15'
[Sun Aug  5 14:07:12 2012] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 14:07:12 2012] Initial guess for spatial extent in simple fitting = 8.50"
[Sun Aug  5 14:07:12 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.037
[Sun Aug  5 14:07:12 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.50"
[Sun Aug  5 17:30:06 2012] fullrun_pn_xmm0134561501_pi300-10000_cl_pass0_src29.ximg exists
[Sun Aug  5 17:30:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134561501_pi300-10000_cl_pass0_src29.csv
[Sun Aug  5 17:30:06 2012] fullrun_pn_xmm0134561501_pi300-10000_cl_pass0_src29_1.ximg exists
[Sun Aug  5 17:30:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134561501_pi300-10000_cl_pass0_src29.csv
[Sun Aug  5 17:30:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0134561501_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0134561501_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 17:30:07 2012] fullrun_pn_xmm0134561501_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sun Aug  5 17:30:07 2012] fullrun_pn_xmm0134561501_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sun Aug  5 17:30:07 2012] Fit fullrun_pn_xmm0134561501_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sun Aug  5 18:47:32 2012] Spatial fit model total counts = 580.586000, observed total counts = 582.000000
[Sun Aug  5 18:47:32 2012] Offset between fit and detection position for source 29 = 5.541432 pixels
[Sun Aug  5 18:47:32 2012] 578.136000 total counts/ 431.172000 bgd. counts: snr = 7.077595
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 5.541432 pixels
  Position = (355.2, 273.0) = 7 48 21.33 -67 46 59.1
  Extent = 16.2 (14.5-17.0)", rotation angle = 0
  Source counts = 147.0 +/- 24.0
  Background counts = 431.2
  Rate = 0.05 +/- 0.008
[Sun Aug  5 18:47:32 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 18:47:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 18:47:32 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 18:47:32 2012] Source does appear to be extended
[Sun Aug  5 18:47:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 18:47:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug  5 18:47:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug  5 18:47:44 2012] Initial guess for spatial extent in simple fitting = 16.18"
[Sun Aug  5 18:47:44 2012] source mask rpix=3.7, npix_max = 71, mask sum = 47, frac = 0.660
[Sun Aug  5 18:47:44 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 16.18"
[Sun Aug  5 22:51:08 2012] fullrun_pn_xmm0134561501_pi300-10000_cl_pass1_src29.ximg exists
[Sun Aug  5 22:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134561501_pi300-10000_cl_pass1_src29.csv
[Sun Aug  5 22:51:08 2012] fullrun_pn_xmm0134561501_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun Aug  5 22:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134561501_pi300-10000_cl_pass1_src29.csv
[Sun Aug  5 22:51:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0134561501_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0134561501_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 22:51:09 2012] fullrun_pn_xmm0134561501_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun Aug  5 22:51:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134561501_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sun Aug  5 22:51:09 2012] fullrun_pn_xmm0134561501_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun Aug  5 22:51:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134561501_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sun Aug  5 22:51:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0134561501_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0134561501_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 23:39:50 2012] Warning, spatial fit 29 centroid is now closest to src. 20
[Sun Aug  5 23:39:50 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 23:39:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 23:39:50 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 23:39:50 2012] Source does appear to be extended
[Sun Aug  5 23:39:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 23:39:59 2012] XMMSAS src. selection expression = ellipse(30852.222000, 23699.772000, 970.524028, 970.524028, 0.000000, X, Y)
[Sun Aug  5 23:39:59 2012] Writing source region out to fullrun_pn_xmm0134561501_pi300-10000_pass1_cl_src29_src.reg
[Sun Aug  5 23:39:59 2012] Extracting stamp from image fullrun_pn_xmm0134561501_pi300-10000_cl_sm2.00.img.gz, (299, 217) - (411, 329)
[Sun Aug  5 23:39:59 2012] XMMSAS bgd. selection expression = annulus(30852.222000, 23699.772000, 1617.540047, 3235.080093, X, Y) && !ellipse(29465.687134, 25888.199768, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(35373.102100, 28040.163200, 1730.624050, 407.333612, 339.205500, X, Y) && !ellipse(34601.124451, 27779.735565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34164.462402, 27620.001038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33574.753845, 27376.975586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32605.617706, 27022.693787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32068.428284, 26844.947540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31311.521912, 26571.126404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30563.467407, 25453.868835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29826.048950, 25134.073212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28530.997345, 25341.672607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27559.038910, 24837.126770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29080.057404, 24107.750397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28791.997345, 24908.493958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28084.737366, 26822.714325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27115.574000, 26356.309200, 1109.272032, 1109.272032, 0.000000, X, Y)
[Sun Aug  5 23:39:59 2012] Writing fullrun_pn_xmm0134561501_pi300-10000_pass1_cl_src29.gif
[Mon Aug  6 00:09:27 2012] Mean detx,y = (2396.77, -2323.34) 
[Mon Aug  6 00:09:29 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug  6 00:10:06 2012] Binned source spectrum to 10 counts/bin
[Mon Aug  6 00:10:07 2012] Setting source spectrum file to fullrun_pn_xmm0134561501_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Aug  6 00:10:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0134561501_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Mon Aug  6 03:38:25 2012] Updating aperture counts using extracted products
[Mon Aug  6 03:38:25 2012] Error reading totcts from fullrun_pn_xmm0134561501_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Aug  6 03:38:25 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug  6 03:38:25 2012] Using photon index=1.80, rate=0.0501, arf fullrun_pn_xmm0134561501_pi300-10000_pass1_cl_src29.arf
[Mon Aug  6 03:38:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug  6 03:38:25 2012] Updating source flux to 1.5e-13