[Mon May 21 10:09:49 2012] Detection parameters:
  Position = (214.8, 272.1) = 7 49 27.10 -67 47 3.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.1 +/- 16.7
  Background counts = 6.4
  Rate = 0.1 +/- 0.01

[Mon May 21 10:09:50 2012] Off-axis axis estimate = 6.36'
[Mon May 21 10:12:28 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Mon May 21 10:12:28 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Mon May 21 10:12:28 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.022
[Mon May 21 10:12:28 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.61"
[Mon May 21 12:41:09 2012] fullrun_pn_xmm0134561301_pi300-10000_cl_pass0_src5.ximg exists
[Mon May 21 12:41:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134561301_pi300-10000_cl_pass0_src5.csv
[Mon May 21 12:41:09 2012] fullrun_pn_xmm0134561301_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon May 21 12:41:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134561301_pi300-10000_cl_pass0_src5.csv
[Mon May 21 12:41:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0134561301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0134561301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 12:41:10 2012] fullrun_pn_xmm0134561301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon May 21 12:41:10 2012] fullrun_pn_xmm0134561301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon May 21 12:41:10 2012] Fit fullrun_pn_xmm0134561301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon May 21 13:55:02 2012] Source 5 is offset by -1.308051 and -7.987296 pixels which is larger than
2 X fitted extent = 1.138143 x 1.138143, not incorporating fit results
[Mon May 21 13:55:02 2012] Warning, spatial fit 5 centroid is now closest to src. 13
[Mon May 21 13:55:02 2012] Vigneting correction estimate = 1.000000
[Mon May 21 13:55:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 13:55:02 2012] Assessing source extent using major
[Mon May 21 13:55:02 2012] Source does appear to be extended
[Mon May 21 13:55:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 13:55:20 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Mon May 21 13:55:20 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Mon May 21 13:55:20 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.022
[Mon May 21 13:55:20 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.61"
[Mon May 21 16:08:34 2012] fullrun_pn_xmm0134561301_pi300-10000_cl_pass1_src5.ximg exists
[Mon May 21 16:08:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134561301_pi300-10000_cl_pass1_src5.csv
[Mon May 21 16:08:34 2012] fullrun_pn_xmm0134561301_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon May 21 16:08:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134561301_pi300-10000_cl_pass1_src5.csv
[Mon May 21 16:08:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0134561301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0134561301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 16:08:34 2012] fullrun_pn_xmm0134561301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon May 21 16:08:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134561301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Mon May 21 16:08:34 2012] fullrun_pn_xmm0134561301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon May 21 16:08:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134561301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Mon May 21 16:08:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0134561301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0134561301_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 16:47:21 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.288044 pixels away
[Mon May 21 16:47:21 2012] Vigneting correction estimate = 1.000000
[Mon May 21 16:47:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 16:47:21 2012] Assessing source extent using major
[Mon May 21 16:47:21 2012] Source does appear to be extended
[Mon May 21 16:47:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 16:47:33 2012] XMMSAS src. selection expression = ellipse(18637.735580, 23624.641266, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 21 16:47:33 2012] Writing source region out to fullrun_pn_xmm0134561301_pi300-10000_pass1_cl_src5_src.reg
[Mon May 21 16:47:33 2012] Extracting stamp from image fullrun_pn_xmm0134561301_pi300-10000_cl_sm2.00.img.gz, (177, 235) - (252, 310)
[Mon May 21 16:47:34 2012] XMMSAS bgd. selection expression = annulus(18637.735580, 23624.641266, 1087.500000, 2175.000000, X, Y) && !ellipse(17992.001923, 23435.701416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17256.982285, 23166.515961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16722.370895, 22939.579987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15804.834000, 22601.346800, 1772.360051, 1772.360051, 0.000000, X, Y) && !ellipse(21599.142000, 24611.140000, 2423.328070, 2423.328070, 0.000000, X, Y) && !ellipse(20745.984161, 24404.505676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21017.046000, 24529.592000, 1335.768038, 1335.768038, 0.000000, X, Y)
[Mon May 21 16:47:34 2012] Writing fullrun_pn_xmm0134561301_pi300-10000_pass1_cl_src5.gif
[Mon May 21 17:01:30 2012] Mean detx,y = (-1441.03, 9093.60) 
[Mon May 21 17:01:34 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 17:02:02 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 17:02:04 2012] Setting source spectrum file to fullrun_pn_xmm0134561301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon May 21 17:02:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0134561301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon May 21 17:27:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 21 17:27:03 2012] rmf not generated due to insufficient counts
[Mon May 21 18:48:23 2012] Updating aperture counts using extracted products
[Mon May 21 18:48:23 2012] Error reading totcts from fullrun_pn_xmm0134561301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon May 21 18:48:24 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 18:48:24 2012] Using photon index=1.80, rate=0.106, arf fullrun_pn_xmm0134561301_pi300-10000_pass1_cl_src5.arf
[Mon May 21 18:48:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 18:48:24 2012] Updating source flux to 4.3e-13
[Mon May 21 18:50:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting