[Fri Jun 22 10:09:34 2012] Detection parameters: Position = (509.0, 269.8) = 7 46 2.22 -67 47 11.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 34.5 +/- 7.5 Background counts = 2.9 Rate = 0.01 +/- 0.002 [Fri Jun 22 10:09:35 2012] Off-axis axis estimate = 15.40' [Fri Jun 22 10:11:57 2012] Using EEF radius (= 14.13 ")to estimate initial spatial extent for simple fitting [Fri Jun 22 10:11:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri Jun 22 10:11:57 2012] Initial guess for spatial extent in simple fitting = 14.13" [Fri Jun 22 10:11:57 2012] source mask rpix=3.2, npix_max = 56, mask sum = 64, frac = 1.139 [Fri Jun 22 10:11:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 14.13" [Fri Jun 22 11:51:34 2012] fullrun_pn_xmm0134561201_pi300-10000_cl_pass0_src1.ximg exists [Fri Jun 22 11:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134561201_pi300-10000_cl_pass0_src1.csv [Fri Jun 22 11:51:34 2012] fullrun_pn_xmm0134561201_pi300-10000_cl_pass0_src1_1.ximg exists [Fri Jun 22 11:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134561201_pi300-10000_cl_pass0_src1.csv [Fri Jun 22 11:51:34 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0134561201_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0134561201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 22 11:51:34 2012] fullrun_pn_xmm0134561201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Fri Jun 22 11:51:34 2012] fullrun_pn_xmm0134561201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Fri Jun 22 11:51:34 2012] Fit fullrun_pn_xmm0134561201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Fri Jun 22 13:44:27 2012] Spatial fit model total counts = 114.363000, observed total counts = 106.000000 [Fri Jun 22 13:44:27 2012] Offset between fit and detection position for source 1 = 0.269291 pixels [Fri Jun 22 13:44:27 2012] 114.694800 total counts/ 94.675700 bgd. counts: snr = 2.057431 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.269291 pixels Position = (508.9, 269.5) = 7 46 2.28 -67 47 10.3 Extent = 5.1 (3.5-8.4)", rotation angle = 0 Source counts = 20.0 +/- 10.7 Background counts = 94.7 Rate = 0.007 +/- 0.004 [Fri Jun 22 13:44:28 2012] Vigneting correction estimate = 1.000000 [Fri Jun 22 13:44:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 22 13:44:28 2012] Assessing source extent using major axis lower bound [Fri Jun 22 13:44:28 2012] Source does appear to be extended [Fri Jun 22 13:44:28 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jun 22 13:44:28 2012] Deleting source due to low Poisson probability 0.9