[Sat Jul 21 21:52:53 2012] Detection parameters:
  Position = (301.7, 231.0) = 3 36 50.90 0 29 23.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1027.6 +/- 39.8
  Background counts = 15.3
  Rate = 0.2 +/- 0.006

[Sat Jul 21 21:52:53 2012] Off-axis axis estimate = 4.90'
[Sat Jul 21 21:55:45 2012] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 21:55:45 2012] Initial guess for spatial extent in simple fitting = 8.88"
[Sat Jul 21 21:55:45 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.162
[Sat Jul 21 21:55:45 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 8.88"
[Sun Jul 22 00:29:52 2012] fullrun_pn_xmm0134540101_pi300-10000_cl_pass0_src27.ximg exists
[Sun Jul 22 00:29:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134540101_pi300-10000_cl_pass0_src27.csv
[Sun Jul 22 00:29:52 2012] fullrun_pn_xmm0134540101_pi300-10000_cl_pass0_src27_1.ximg exists
[Sun Jul 22 00:29:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134540101_pi300-10000_cl_pass0_src27.csv
[Sun Jul 22 00:29:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0134540101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0134540101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 00:29:53 2012] fullrun_pn_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sun Jul 22 00:29:53 2012] fullrun_pn_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sun Jul 22 00:29:53 2012] Fit fullrun_pn_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sun Jul 22 02:43:30 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 12.089397 pixels away
[Sun Jul 22 02:43:30 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 02:43:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 02:43:30 2012] Assessing source extent using major
[Sun Jul 22 02:43:30 2012] Source does appear to be extended
[Sun Jul 22 02:43:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 02:43:30 2012] Source is confused with source 31
[Sun Jul 22 02:43:46 2012] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 02:43:46 2012] Initial guess for spatial extent in simple fitting = 8.88"
[Sun Jul 22 02:43:46 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.162
[Sun Jul 22 02:43:46 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 8.88"
[Sun Jul 22 04:07:32 2012] fullrun_pn_xmm0134540101_pi300-10000_cl_pass1_src15.ximg exists
[Sun Jul 22 04:07:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134540101_pi300-10000_cl_pass1_src15.csv
[Sun Jul 22 04:07:32 2012] fullrun_pn_xmm0134540101_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Jul 22 04:07:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134540101_pi300-10000_cl_pass1_src15.csv
[Sun Jul 22 04:07:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0134540101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0134540101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 04:07:33 2012] fullrun_pn_xmm0134540101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Jul 22 04:07:33 2012] fullrun_pn_xmm0134540101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Jul 22 04:07:33 2012] Fit fullrun_pn_xmm0134540101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Jul 22 21:16:23 2012] Spatial fit model total counts = 2430.030000, observed total counts = 2434.000000
[Sun Jul 22 21:16:23 2012] Offset between fit and detection position for source 28 = 0.962139 pixels
[Sun Jul 22 21:16:23 2012] 1098.944000 total counts/ 119.453000 bgd. counts: snr = 89.619377
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.962139 pixels
  Position = (301.6, 230.0) = 3 36 50.95 0 29 19.2
  Extent = 9.6 (8.7-10.3)", rotation angle = 0
  Source counts = 979.5 +/- 33.2
  Background counts = 119.5
  Rate = 0.1 +/- 0.003
[Sun Jul 22 21:16:23 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 21:16:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 21:16:23 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 21:16:23 2012] Source does appear to be extended
[Sun Jul 22 21:16:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 21:16:36 2012] XMMSAS src. selection expression = ellipse(26187.988800, 19963.613200, 573.643817, 573.643817, 0.000000, X, Y)
[Sun Jul 22 21:16:36 2012] Writing source region out to fullrun_pn_xmm0134540101_pi300-10000_pass1_cl_src28_src.reg
[Sun Jul 22 21:16:36 2012] Extracting stamp from image fullrun_pn_xmm0134540101_pi300-10000_cl_sm2.00.img.gz, (269, 197) - (335, 263)
[Sun Jul 22 21:16:36 2012] XMMSAS bgd. selection expression = annulus(26187.988800, 19963.613200, 956.073028, 1912.146055, X, Y) && !ellipse(26567.332980, 22501.402260, 1266.848036, 483.336014, 90.000000, X, Y) && !ellipse(26398.475159, 21527.322113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26327.358340, 20848.267820, 943.384027, 943.384027, 0.000000, X, Y) && !ellipse(26135.227600, 19559.620600, 1124.896032, 1124.896032, 0.000000, X, Y) && !ellipse(25906.878198, 18094.483440, 1670.400048, 443.082638, 100.408124, X, Y) && !ellipse(25852.935669, 17785.281342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25801.113202, 17354.820237, 1570.600045, 420.243921, 100.267912, X, Y) && !ellipse(25775.143200, 17140.529600, 1013.720029, 1013.720029, 0.000000, X, Y)
[Sun Jul 22 21:16:36 2012] Writing fullrun_pn_xmm0134540101_pi300-10000_pass1_cl_src28.gif
[Sun Jul 22 22:06:42 2012] Mean detx,y = (113.04, 7340.92) 
[Sun Jul 22 22:06:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 22:06:58 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 22:06:58 2012] Setting source spectrum file to fullrun_pn_xmm0134540101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sun Jul 22 22:06:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0134540101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Mon Jul 23 01:35:14 2012] Updating aperture counts using extracted products
[Mon Jul 23 01:35:14 2012] Error reading totcts from fullrun_pn_xmm0134540101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Mon Jul 23 01:35:15 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 01:35:15 2012] Using photon index=1.80, rate=0.098, arf fullrun_pn_xmm0134540101_pi300-10000_pass1_cl_src28.arf
[Mon Jul 23 01:35:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 01:35:15 2012] Updating source flux to 3.6e-13
[Mon Jul 23 01:36:42 2012] Flag c found in src. 28 procflags, skipping spectral fitting