[Sat Jul 21 21:52:53 2012] Detection parameters:
  Position = (212.9, 259.1) = 3 37 16.66 0 31 26.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23.5 +/- 6.4
  Background counts = 7.5
  Rate = 0.002 +/- 0.0006

[Sat Jul 21 21:52:53 2012] Off-axis axis estimate = 6.82'
[Sat Jul 21 21:55:45 2012] Using EEF radius (= 9.84 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 21:55:45 2012] Initial guess for spatial extent in simple fitting = 9.84"
[Sat Jul 21 21:55:45 2012] source mask rpix=2.3, npix_max = 30, mask sum = 27, frac = 0.885
[Sat Jul 21 21:55:45 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 9.84"
[Sun Jul 22 00:29:52 2012] fullrun_pn_xmm0134540101_pi300-10000_cl_pass0_src21.ximg exists
[Sun Jul 22 00:29:52 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0134540101_pi300-10000_cl_pass0_src21.csv
[Sun Jul 22 00:29:52 2012] fullrun_pn_xmm0134540101_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Jul 22 00:29:52 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0134540101_pi300-10000_cl_pass0_src21.csv
[Sun Jul 22 00:29:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0134540101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0134540101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 00:29:53 2012] fullrun_pn_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Jul 22 00:29:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Jul 22 00:29:53 2012] fullrun_pn_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Jul 22 00:29:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Jul 22 00:29:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 02:43:30 2012] Spatial fit model total counts = 85.459200, observed total counts = 77.000000
[Sun Jul 22 02:43:30 2012] Offset between fit and detection position for source 22 = 0.252292 pixels
[Sun Jul 22 02:43:30 2012] 84.173500 total counts/ 64.107400 bgd. counts: snr = 2.506161
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.252292 pixels
  Position = (213.0, 259.3) = 3 37 16.63 0 31 26.7
  Extent = 4.9 (2.9-7.5)", rotation angle = 0
  Source counts = 20.1 +/- 9.2
  Background counts = 64.1
  Rate = 0.002 +/- 0.0009
[Sun Jul 22 02:43:30 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 02:43:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 02:43:30 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 02:43:30 2012] Source does appear to be extended
[Sun Jul 22 02:43:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 02:43:30 2012] Deleting source due to low Poisson probability 0.7