[Sat Jul 21 21:53:39 2012] Detection parameters:
  Position = (324.4, 312.9) = 3 36 44.33 0 35 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 561.7 +/- 51.8
  Background counts = 17.3
  Rate = 0.03 +/- 0.002

[Sat Jul 21 21:53:40 2012] Off-axis axis estimate = 2.15'
[Sun Jul 22 00:55:40 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 00:55:40 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Sun Jul 22 00:55:40 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.707
[Sun Jul 22 00:55:40 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.51"
[Sun Jul 22 02:43:21 2012] fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jul 22 02:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_src5.csv
[Sun Jul 22 02:43:21 2012] fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jul 22 02:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_src5.csv
[Sun Jul 22 02:43:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 02:43:21 2012] fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jul 22 02:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jul 22 02:43:21 2012] fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jul 22 02:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jul 22 02:43:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 02:43:38 2012] Warning, spatial fit 5 centroid is now closest to src. 5
[Sun Jul 22 02:43:38 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 02:43:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 02:43:38 2012] Assessing source extent using major
[Sun Jul 22 02:43:38 2012] Source does appear to be extended
[Sun Jul 22 02:43:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 02:43:38 2012] Source is confused with source 1
[Sun Jul 22 04:26:57 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 04:26:57 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Sun Jul 22 04:26:57 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.707
[Sun Jul 22 04:26:57 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.51"
[Sun Jul 22 21:16:16 2012] fullrun_mos2_xmm0134540101_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jul 22 21:16:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134540101_pi300-10000_cl_pass1_src5.csv
[Sun Jul 22 21:16:16 2012] fullrun_mos2_xmm0134540101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jul 22 21:16:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134540101_pi300-10000_cl_pass1_src5.csv
[Sun Jul 22 21:16:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134540101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134540101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 21:16:16 2012] fullrun_mos2_xmm0134540101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jul 22 21:16:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134540101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jul 22 21:16:16 2012] fullrun_mos2_xmm0134540101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jul 22 21:16:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134540101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jul 22 21:16:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134540101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134540101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 21:16:28 2012] Source 6 is offset by 7.257920 and 1.494733 pixels which is larger than
2 X fitted extent = 3.606593 x 3.606593, not incorporating fit results
[Sun Jul 22 21:16:28 2012] Source 6 is offset by 7.231627 and 1.329078 pixels which is larger than
2 X fitted extent = 3.929977 x 3.929977, not incorporating fit results
[Sun Jul 22 21:16:28 2012] Source 6 is offset by 7.305966 and 1.057527 pixels which is larger than
2 X fitted extent = 3.754487 x 3.754487, not incorporating fit results
[Sun Jul 22 21:16:28 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 21:16:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 21:16:28 2012] Assessing source extent using major
[Sun Jul 22 21:16:28 2012] Source does appear to be extended
[Sun Jul 22 21:16:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 01:18:25 2012] XMMSAS src. selection expression = ellipse(28174.703033, 27169.463806, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 23 01:18:25 2012] Writing source region out to fullrun_mos2_xmm0134540101_pi300-10000_pass1_cl_src6_src.reg
[Mon Jul 23 01:18:25 2012] Extracting stamp from image fullrun_mos2_xmm0134540101_pi300-10000_cl_sm2.00.img.gz, (287, 275) - (362, 350)
[Mon Jul 23 01:18:25 2012] XMMSAS bgd. selection expression = annulus(28174.703033, 27169.463806, 1087.500000, 2175.000000, X, Y) && !ellipse(27278.000000, 27104.695980, 1640.923247, 1640.923247, 0.000000, X, Y) && !ellipse(27979.959290, 26393.271301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28204.619904, 26812.258820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28187.070160, 27530.839844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27880.140808, 25783.992523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28313.136261, 28314.179688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25306.166000, 26236.773800, 1099.640032, 1099.640032, 0.000000, X, Y)
[Mon Jul 23 01:18:25 2012] Writing fullrun_mos2_xmm0134540101_pi300-10000_pass1_cl_src6.gif
[Mon Jul 23 01:24:03 2012] Mean detx,y = (-504.71, -100.36) 
[Mon Jul 23 01:24:04 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 01:24:11 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 01:24:11 2012] Setting source spectrum file to fullrun_mos2_xmm0134540101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Jul 23 01:24:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0134540101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Jul 23 01:29:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 23 01:29:56 2012] rmf not generated due to insufficient counts
[Mon Jul 23 01:35:16 2012] Updating aperture counts using extracted products
[Mon Jul 23 01:35:16 2012] Error reading totcts from fullrun_mos2_xmm0134540101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Jul 23 01:35:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 01:35:16 2012] Using photon index=1.80, rate=0.0264, arf fullrun_mos2_xmm0134540101_pi300-10000_pass1_cl_src6.arf
[Mon Jul 23 01:35:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 01:35:16 2012] Updating source flux to 3.2e-13
[Mon Jul 23 01:36:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting