[Sat Jul 21 21:53:40 2012] Detection parameters:
  Position = (266.5, 422.1) = 3 37 1.12 0 43 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26.3 +/- 7.0
  Background counts = 5.5
  Rate = 0.002 +/- 0.0006

[Sat Jul 21 21:53:40 2012] Off-axis axis estimate = 9.26'
[Sun Jul 22 00:55:40 2012] Using EEF radius (= 11.06 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 00:55:40 2012] Initial guess for spatial extent in simple fitting = 11.06"
[Sun Jul 22 00:55:40 2012] source mask rpix=2.5, npix_max = 37, mask sum = 42, frac = 1.135
[Sun Jul 22 00:55:40 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 11.06"
[Sun Jul 22 02:43:21 2012] fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_src21.ximg exists
[Sun Jul 22 02:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_src21.csv
[Sun Jul 22 02:43:21 2012] fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Jul 22 02:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_src21.csv
[Sun Jul 22 02:43:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 02:43:21 2012] fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Jul 22 02:43:21 2012] fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Jul 22 02:43:21 2012] Fit fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Jul 22 02:43:38 2012] Spatial fit model total counts = 94.093600, observed total counts = 88.000000
[Sun Jul 22 02:43:38 2012] Offset between fit and detection position for source 28 = 7.331649 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 7.331649 pixels
  Position = (259.4, 423.7) = 3 37 3.19 0 43 21.6
  Extent = 22.1 (22.1-44.2)", rotation angle = 0
  Source counts = 97.1 +/- 9.9
  Background counts = 0.0
  Rate = 0.004 +/- 0.0004
 Deleting source due to low signal-to-noise ratio