[Sat Jul 21 21:53:39 2012] Detection parameters:
  Position = (314.2, 312.1) = 3 36 47.28 0 35 16.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 218089.2 +/- 537.2
  Background counts = 17.5
  Rate = 9 +/- 0.02

[Sat Jul 21 21:53:40 2012] Off-axis axis estimate = 1.51'
[Sun Jul 22 00:55:40 2012] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 00:55:40 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Sun Jul 22 00:55:40 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.864
[Sun Jul 22 00:55:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.18"
[Sun Jul 22 02:43:21 2012] fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 22 02:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_src1.csv
[Sun Jul 22 02:43:21 2012] fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 22 02:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_src1.csv
[Sun Jul 22 02:43:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 02:43:21 2012] fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 22 02:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jul 22 02:43:21 2012] fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 22 02:43:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jul 22 02:43:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 02:43:38 2012] Spatial fit model total counts = 394588.000000, observed total counts = 202052.000000
[Sun Jul 22 02:43:38 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 22 02:43:38 2012] Spatial fit model total counts = 56988.000000, observed total counts = 42347.000000
[Sun Jul 22 02:43:38 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 22 02:43:38 2012] Spatial fit model total counts = 36351.200000, observed total counts = 37445.000000
[Sun Jul 22 02:43:38 2012] Offset between fit and detection position for source 1 = 2.847745 pixels
[Sun Jul 22 02:43:38 2012] Warning, changing simple spatial fit ID from 1 to 4
[Sun Jul 22 02:43:38 2012] 21998.440000 total counts/ 3138.540000 bgd. counts: snr = 336.647622
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.847745 pixels
  Position = (317.0, 311.6) = 3 36 46.47 0 35 13.9
  Extent = 8.5 (8.4-8.7)", rotation angle = 0
  Source counts = 18859.9 +/- 148.3
  Background counts = 3138.5
  Rate = 0.8 +/- 0.006
[Sun Jul 22 02:43:38 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 02:43:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 02:43:38 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 02:43:38 2012] Source does appear to be extended
[Sun Jul 22 02:43:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 02:43:38 2012] Source is confused with source 6
[Sun Jul 22 04:26:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 22 04:26:57 2012] Initial guess for spatial extent in simple fitting = 8.52"
[Sun Jul 22 04:26:57 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.827
[Sun Jul 22 04:26:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.52"
[Sun Jul 22 21:16:16 2012] fullrun_mos2_xmm0134540101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 22 21:16:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134540101_pi300-10000_cl_pass1_src1.csv
[Sun Jul 22 21:16:16 2012] fullrun_mos2_xmm0134540101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 22 21:16:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134540101_pi300-10000_cl_pass1_src1.csv
[Sun Jul 22 21:16:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134540101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134540101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 21:16:16 2012] fullrun_mos2_xmm0134540101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 22 21:16:16 2012] fullrun_mos2_xmm0134540101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 22 21:16:16 2012] Fit fullrun_mos2_xmm0134540101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul 22 21:16:28 2012] Spatial fit model total counts = 193829.000000, observed total counts = 198639.000000
[Sun Jul 22 21:16:28 2012] Offset between fit and detection position for source 1 = 2.971376 pixels
[Sun Jul 22 21:16:28 2012] 192133.000000 total counts/ 25600.000000 bgd. counts: snr = 1040.831250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.971376 pixels
  Position = (314.1, 312.1) = 3 36 47.32 0 35 16.3
  Extent = 6.8 (6.8-6.9)", rotation angle = 0
  Source counts = 166533.0 +/- 438.3
  Background counts = 25600.0
  Rate = 7 +/- 0.02
[Sun Jul 22 21:16:28 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 21:16:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 21:16:28 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 21:16:28 2012] Source does appear to be extended
[Sun Jul 22 21:16:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 01:18:25 2012] Counts = 166533.000000, rescaling region sizes by 3.000000
[Mon Jul 23 01:18:25 2012] XMMSAS src. selection expression = ellipse(27278.000000, 27104.695980, 1230.692435, 1230.692435, 0.000000, X, Y)
[Mon Jul 23 01:18:25 2012] Writing source region out to fullrun_mos2_xmm0134540101_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul 23 01:18:25 2012] Extracting stamp from image fullrun_mos2_xmm0134540101_pi300-10000_cl_sm2.00.img.gz, (243, 241) - (385, 383)
[Mon Jul 23 01:18:25 2012] XMMSAS bgd. selection expression = annulus(27278.000000, 27104.695980, 6153.462177, 12306.924354, X, Y) && !ellipse(29487.673431, 14406.687531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27979.959290, 26393.271301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28204.619904, 26812.258820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28187.070160, 27530.839844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28174.703033, 27169.463806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27880.140808, 25783.992523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28313.136261, 28314.179688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36045.088684, 23860.415833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25306.166000, 26236.773800, 1099.640032, 1099.640032, 0.000000, X, Y)
[Mon Jul 23 01:18:25 2012] Writing fullrun_mos2_xmm0134540101_pi300-10000_pass1_cl_src1.gif
[Mon Jul 23 01:18:39 2012] Mean detx,y = (45.89, -245.27) 
[Mon Jul 23 01:18:42 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 01:23:04 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 01:23:04 2012] Setting source spectrum file to fullrun_mos2_xmm0134540101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 23 01:23:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0134540101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul 23 01:35:16 2012] Updating aperture counts using extracted products
[Mon Jul 23 01:35:16 2012] Error reading totcts from fullrun_mos2_xmm0134540101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 23 01:35:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 01:35:16 2012] Using photon index=1.80, rate=7.02, arf fullrun_mos2_xmm0134540101_pi300-10000_pass1_cl_src1.arf
[Mon Jul 23 01:35:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 01:35:16 2012] Updating source flux to 8.1e-11
[Mon Jul 23 01:36:03 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Mon Jul 23 01:36:03 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Jul 23 01:36:42 2012] Reading fit data from xmm0134540101/analysis//spectral/fullrun_mos2_xmm0134540101_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul 23 01:36:42 2012] Spectral fit parameter nH value = 2.07712e+21
[Mon Jul 23 01:36:42 2012] Spectral fit parameter PhoIndex value = 3.32964
[Mon Jul 23 01:36:42 2012] Failed to get F(0.3-8.0) from xmm0134540101/analysis//spectral/fullrun_mos2_xmm0134540101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul 23 01:36:42 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 01:36:42 2012] Using Nh = 2.1e+21, photon index=3.33, rate=7.02, arf fullrun_mos2_xmm0134540101_pi300-10000_pass1_cl_src1.arf
[Mon Jul 23 01:36:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 01:36:42 2012] Updating source flux to 5.7e-11