[Sat Jul 21 21:53:14 2012] Detection parameters:
  Position = (339.9, 166.3) = 3 36 39.83 0 24 42.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 770.3 +/- 33.3
  Background counts = 6.0
  Rate = 0.03 +/- 0.001

[Sat Jul 21 21:53:14 2012] Off-axis axis estimate = 10.04'
[Sun Jul 22 00:29:54 2012] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 00:29:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 22 00:29:54 2012] Initial guess for spatial extent in simple fitting = 11.45"
[Sun Jul 22 00:29:54 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.918
[Sun Jul 22 00:29:54 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.45"
[Sun Jul 22 00:55:40 2012] fullrun_mos1_xmm0134540101_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jul 22 00:55:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0134540101_pi300-10000_cl_pass0_src2.csv
[Sun Jul 22 00:55:40 2012] fullrun_mos1_xmm0134540101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jul 22 00:55:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0134540101_pi300-10000_cl_pass0_src2.csv
[Sun Jul 22 00:55:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0134540101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0134540101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 00:55:40 2012] fullrun_mos1_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jul 22 00:55:40 2012] fullrun_mos1_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jul 22 00:55:40 2012] Fit fullrun_mos1_xmm0134540101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Jul 22 02:43:33 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.484585 pixels away
[Sun Jul 22 02:43:33 2012] Source 2 is offset by 9.041707 and -3.542583 pixels which is larger than
2 X fitted extent = 1.266961 x 1.266961, not incorporating fit results
[Sun Jul 22 02:43:33 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 02:43:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 02:43:33 2012] Assessing source extent using major
[Sun Jul 22 02:43:33 2012] Source does appear to be extended
[Sun Jul 22 02:43:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 04:07:33 2012] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 04:07:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 22 04:07:33 2012] Initial guess for spatial extent in simple fitting = 11.45"
[Sun Jul 22 04:07:33 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.918
[Sun Jul 22 04:07:33 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.45"
[Sun Jul 22 04:26:56 2012] fullrun_mos1_xmm0134540101_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jul 22 04:26:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0134540101_pi300-10000_cl_pass1_src2.csv
[Sun Jul 22 04:26:56 2012] fullrun_mos1_xmm0134540101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jul 22 04:26:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0134540101_pi300-10000_cl_pass1_src2.csv
[Sun Jul 22 04:26:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0134540101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0134540101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 04:26:56 2012] fullrun_mos1_xmm0134540101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jul 22 04:26:56 2012] fullrun_mos1_xmm0134540101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jul 22 04:26:56 2012] Fit fullrun_mos1_xmm0134540101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Jul 22 21:16:25 2012] Spatial fit model total counts = 744.156000, observed total counts = 748.000000
[Sun Jul 22 21:16:25 2012] Offset between fit and detection position for source 2 = 0.215018 pixels
[Sun Jul 22 21:16:25 2012] 745.372000 total counts/ 193.008000 bgd. counts: snr = 39.759207
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.215018 pixels
  Position = (339.8, 166.5) = 3 36 39.87 0 24 42.9
  Extent = 6.5 (6.0-6.9)", rotation angle = 0
  Source counts = 552.4 +/- 27.3
  Background counts = 193.0
  Rate = 0.02 +/- 0.001
[Sun Jul 22 21:16:25 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 21:16:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 21:16:25 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 21:16:25 2012] Source does appear to be extended
[Sun Jul 22 21:16:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 00:44:27 2012] XMMSAS src. selection expression = ellipse(29512.657300, 14436.857800, 387.342011, 387.342011, 0.000000, X, Y)
[Mon Jul 23 00:44:27 2012] Writing source region out to fullrun_mos1_xmm0134540101_pi300-10000_pass1_cl_src2_src.reg
[Mon Jul 23 00:44:27 2012] Extracting stamp from image fullrun_mos1_xmm0134540101_pi300-10000_cl_sm2.00.img.gz, (318, 144) - (362, 189)
[Mon Jul 23 00:44:27 2012] XMMSAS bgd. selection expression = annulus(29512.657300, 14436.857800, 645.570019, 1291.140037, X, Y)
[Mon Jul 23 00:44:27 2012] Writing fullrun_mos1_xmm0134540101_pi300-10000_pass1_cl_src2.gif
[Mon Jul 23 00:49:06 2012] Mean detx,y = (-12199.13, 3941.98) 
[Mon Jul 23 00:49:07 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 00:49:15 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 00:49:15 2012] Setting source spectrum file to fullrun_mos1_xmm0134540101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Jul 23 00:49:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0134540101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Jul 23 01:35:15 2012] Updating aperture counts using extracted products
[Mon Jul 23 01:35:15 2012] Error reading totcts from fullrun_mos1_xmm0134540101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Jul 23 01:35:15 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 01:35:15 2012] Using photon index=1.80, rate=0.0233, arf fullrun_mos1_xmm0134540101_pi300-10000_pass1_cl_src2.arf
[Mon Jul 23 01:35:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 01:35:16 2012] Updating source flux to 6.1e-13
[Mon Jul 23 01:35:17 2012] Flag b found in src. 2 procflags, skipping spectral fitting