[Wed Sep  5 12:15:58 2012] Detection parameters:
  Position = (253.1, 299.0) = 5 35 44.84 -5 7 16.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3297.1 +/- 69.7
  Background counts = 32.9
  Rate = 0.2 +/- 0.005

[Wed Sep  5 12:16:01 2012] Off-axis axis estimate = 3.29'
[Wed Sep  5 12:20:59 2012] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 12:20:59 2012] Initial guess for spatial extent in simple fitting = 8.07"
[Wed Sep  5 12:20:59 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.721
[Wed Sep  5 12:20:59 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.07"
[Wed Sep  5 15:20:26 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_src9.ximg exists
[Wed Sep  5 15:20:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_src9.csv
[Wed Sep  5 15:20:26 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Sep  5 15:20:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_src9.csv
[Wed Sep  5 15:20:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 15:20:28 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Sep  5 15:20:28 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Sep  5 15:20:28 2012] Fit fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Sep  5 22:14:06 2012] Spatial fit model total counts = 3277.260000, observed total counts = 3284.000000
[Wed Sep  5 22:14:06 2012] Offset between fit and detection position for source 9 = 0.022292 pixels
[Wed Sep  5 22:14:06 2012] 3285.069000 total counts/ 972.719000 bgd. counts: snr = 74.141244
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.022292 pixels
  Position = (253.1, 299.0) = 5 35 44.84 -5 7 17.8
  Extent = 5.8 (5.6-6.0)", rotation angle = 0
  Source counts = 2312.3 +/- 57.3
  Background counts = 972.7
  Rate = 0.1 +/- 0.003
[Wed Sep  5 22:14:06 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 22:14:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 22:14:06 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 22:14:06 2012] Source does appear to be extended
[Wed Sep  5 22:14:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 22:15:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 22:15:21 2012] Initial guess for spatial extent in simple fitting = 5.78"
[Wed Sep  5 22:15:21 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.195
[Wed Sep  5 22:15:21 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 5.78"
[Thu Sep  6 01:38:19 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_src9.ximg exists
[Thu Sep  6 01:38:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_src9.csv
[Thu Sep  6 01:38:19 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Sep  6 01:38:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_src9.csv
[Thu Sep  6 01:38:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 01:38:21 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Sep  6 01:38:21 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Sep  6 01:38:21 2012] Fit fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Sep  6 07:19:06 2012] Spatial fit model total counts = 3281.760000, observed total counts = 3287.000000
[Thu Sep  6 07:19:06 2012] Offset between fit and detection position for source 9 = 0.017949 pixels
[Thu Sep  6 07:19:06 2012] 3305.745000 total counts/ 988.465000 bgd. counts: snr = 73.705155
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.017949 pixels
  Position = (253.1, 299.0) = 5 35 44.84 -5 7 17.8
  Extent = 5.8 (5.6-6.0)", rotation angle = 0
  Source counts = 2317.3 +/- 57.5
  Background counts = 988.5
  Rate = 0.1 +/- 0.003
[Thu Sep  6 07:19:07 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 07:19:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 07:19:07 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 07:19:07 2012] Source does appear to be extended
[Thu Sep  6 07:19:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 07:20:06 2012] Counts = 2317.280000, rescaling region sizes by 2.000000
[Thu Sep  6 07:20:06 2012] XMMSAS src. selection expression = ellipse(21972.021340, 25960.695680, 695.372420, 695.372420, 0.000000, X, Y)
[Thu Sep  6 07:20:06 2012] Writing source region out to fullrun_pn_xmm0134531601_pi300-10000_pass1_cl_src9_src.reg
[Thu Sep  6 07:20:06 2012] Extracting stamp from image fullrun_pn_xmm0134531601_pi300-10000_cl_sm2.00.img.gz, (213, 259) - (293, 339)
[Thu Sep  6 07:20:06 2012] XMMSAS bgd. selection expression = annulus(21972.021340, 25960.695680, 2317.908067, 4635.816133, X, Y) && !ellipse(22453.473328, 23547.831268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19950.169662, 24921.482361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20109.783400, 26125.303980, 510.163215, 386.872011, 84.595160, X, Y) && !ellipse(21103.388660, 22090.165200, 465.863213, 465.863213, 0.000000, X, Y) && !ellipse(19752.007568, 28985.471985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19734.441895, 28251.595337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26712.047394, 27434.082611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24112.521484, 26852.373657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23725.649200, 26222.640533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23695.299561, 23985.597809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25818.228200, 23344.867600, 430.949612, 430.949612, 0.000000, X, Y) && !ellipse(27742.656000, 23112.450400, 1171.368034, 583.593617, 90.000000, X, Y) && !ellipse(22845.844177, 22493.574890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24265.036987, 22124.265625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27743.174000, 21660.772000, 1343.720039, 1343.720039, 0.000000, X, Y) && !ellipse(21606.991577, 21724.420868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26897.214000, 20939.878000, 1346.520039, 1346.520039, 0.000000, X, Y) && !ellipse(27239.028229, 31455.960815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25305.192505, 30932.975800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26962.496307, 30271.246918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19042.068665, 29624.141937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22391.587250, 27874.764374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19009.261795, 26932.836975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26895.860382, 25391.395996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23855.793427, 25073.087189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23833.674377, 22741.137787, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 07:20:06 2012] Writing fullrun_pn_xmm0134531601_pi300-10000_pass1_cl_src9.gif
[Thu Sep  6 07:31:32 2012] Mean detx,y = (-4998.50, 1530.44) 
[Thu Sep  6 07:31:35 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 07:32:10 2012] grppha failed
[Thu Sep  6 07:32:10 2012] Setting source spectrum file to fullrun_pn_xmm0134531601_pi300-10000_pass1_cl_src9_src.pi.gz
[Thu Sep  6 07:32:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0134531601_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Sep  6 09:56:16 2012] Updating aperture counts using extracted products
[Thu Sep  6 09:56:16 2012] Error reading totcts from fullrun_pn_xmm0134531601_pi300-10000_pass1_cl_src9_src.pi.gz
[Thu Sep  6 09:56:17 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 09:56:25 2012] Source 9 has no response, skipping
[Thu Sep  6 09:56:26 2012] xmm0134531601/analysis//spectral/fullrun_pn_xmm0134531601_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete