[Wed Sep  5 12:15:58 2012] Detection parameters:
  Position = (399.0, 181.9) = 5 35 2.35 -5 15 48.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2591.6 +/- 59.2
  Background counts = 29.3
  Rate = 0.1 +/- 0.003

[Wed Sep  5 12:16:01 2012] Off-axis axis estimate = 11.16'
[Wed Sep  5 12:20:59 2012] Using EEF radius (= 12.01 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 12:20:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep  5 12:20:59 2012] Initial guess for spatial extent in simple fitting = 12.01"
[Wed Sep  5 12:20:59 2012] source mask rpix=2.8, npix_max = 42, mask sum = 29, frac = 0.682
[Wed Sep  5 12:20:59 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 12.01"
[Wed Sep  5 15:20:26 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_src4.ximg exists
[Wed Sep  5 15:20:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_src4.csv
[Wed Sep  5 15:20:26 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Sep  5 15:20:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_src4.csv
[Wed Sep  5 15:20:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 15:20:28 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Sep  5 15:20:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Sep  5 15:20:28 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Sep  5 15:20:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Sep  5 15:20:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 22:14:06 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.693895 pixels away
[Wed Sep  5 22:14:06 2012] Source 4 is offset by -0.499015 and -2.583932 pixels which is larger than
2 X fitted extent = 1.313352 x 1.313352, not incorporating fit results
[Wed Sep  5 22:14:06 2012] Spatial fit model total counts = 3428.550000, observed total counts = 2873.000000
[Wed Sep  5 22:14:06 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Sep  5 22:14:06 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 22:14:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 22:14:06 2012] Assessing source extent using major
[Wed Sep  5 22:14:06 2012] Source does appear to be extended
[Wed Sep  5 22:14:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 22:15:21 2012] Using EEF radius (= 12.01 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 22:15:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep  5 22:15:21 2012] Initial guess for spatial extent in simple fitting = 12.01"
[Wed Sep  5 22:15:21 2012] source mask rpix=2.8, npix_max = 42, mask sum = 29, frac = 0.682
[Wed Sep  5 22:15:21 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 12.01"
[Thu Sep  6 01:38:19 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_src4.ximg exists
[Thu Sep  6 01:38:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_src4.csv
[Thu Sep  6 01:38:19 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Sep  6 01:38:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_src4.csv
[Thu Sep  6 01:38:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 01:38:21 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Sep  6 01:38:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Sep  6 01:38:21 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Sep  6 01:38:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Sep  6 01:38:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 07:19:06 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.576281 pixels away
[Thu Sep  6 07:19:07 2012] Spatial fit model total counts = 3391.970000, observed total counts = 2873.000000
[Thu Sep  6 07:19:07 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Sep  6 07:19:07 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 07:19:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 07:19:07 2012] Assessing source extent using major
[Thu Sep  6 07:19:07 2012] Source does appear to be extended
[Thu Sep  6 07:19:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 07:20:06 2012] Counts = 2591.635254, rescaling region sizes by 2.000000
[Thu Sep  6 07:20:06 2012] XMMSAS src. selection expression = ellipse(34665.179688, 15777.603943, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Sep  6 07:20:06 2012] Writing source region out to fullrun_pn_xmm0134531601_pi300-10000_pass1_cl_src4_src.reg
[Thu Sep  6 07:20:06 2012] Extracting stamp from image fullrun_pn_xmm0134531601_pi300-10000_cl_sm2.00.img.gz, (324, 107) - (474, 257)
[Thu Sep  6 07:20:06 2012] XMMSAS bgd. selection expression = annulus(34665.179688, 15777.603943, 4350.000000, 8700.000000, X, Y) && !ellipse(29005.224920, 20051.143800, 500.937614, 442.105613, 354.070080, X, Y) && !ellipse(29515.904358, 14230.009933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34087.825200, 24854.538000, 1305.098438, 1305.098438, 0.000000, X, Y) && !ellipse(28371.135000, 21670.295600, 433.734412, 423.325612, 90.000000, X, Y) && !ellipse(28634.418701, 25093.406128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27516.123980, 24305.995400, 445.188813, 445.188813, 0.000000, X, Y) && !ellipse(33819.768200, 16889.254200, 563.578416, 359.386410, 328.726000, X, Y) && !ellipse(30677.007080, 13367.341797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27090.951935, 13130.977814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33962.085449, 13454.550217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31387.094666, 23520.487122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27821.868225, 23348.077484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25818.228200, 23344.867600, 430.949612, 430.949612, 0.000000, X, Y) && !ellipse(34965.428986, 23252.260132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28990.028000, 23600.243400, 565.536816, 565.536816, 0.000000, X, Y) && !ellipse(27742.656000, 23112.450400, 1171.368034, 583.593617, 90.000000, X, Y) && !ellipse(34009.756500, 22765.386169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37344.953857, 22142.283981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27743.174000, 21660.772000, 1343.720039, 1343.720039, 0.000000, X, Y) && !ellipse(39804.519897, 21770.482971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38152.568634, 21178.844208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26897.214000, 20939.878000, 1346.520039, 1346.520039, 0.000000, X, Y) && !ellipse(36332.158417, 20839.946976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33375.435486, 20589.861801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28023.854000, 20341.798800, 370.315211, 370.315211, 0.000000, X, Y) && !ellipse(40618.331512, 19979.114792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26056.990440, 19737.568000, 405.277612, 405.277612, 0.000000, X, Y) && !ellipse(29360.457703, 18758.758453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28813.152200, 17365.825000, 328.354409, 328.354409, 0.000000, X, Y) && !ellipse(29897.413483, 16982.567749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30599.028870, 16730.654587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28818.691010, 16670.800934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31837.780579, 13789.652084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34100.146973, 16236.467346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26020.832000, 16041.475200, 414.128012, 414.128012, 0.000000, X, Y) && !ellipse(31540.640320, 16202.792282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28854.674000, 16019.822000, 1735.672050, 1735.672050, 0.000000, X, Y) && !ellipse(25978.685822, 15439.018677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29748.997345, 15183.088455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25548.462219, 15422.184464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26579.460000, 14852.906000, 339.907210, 339.907210, 0.000000, X, Y) && !ellipse(25911.027710, 14742.327042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31894.096405, 14327.660583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28048.658173, 14321.504898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31339.043945, 14037.870773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26999.372000, 14291.416000, 459.175213, 459.175213, 0.000000, X, Y) && !ellipse(34199.569855, 23720.949799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25225.810000, 13945.114000, 1773.448051, 1773.448051, 0.000000, X, Y) && !ellipse(33332.251434, 21947.167206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34059.201111, 21694.288940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33116.782532, 21193.717682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34015.969269, 20820.484283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37981.032501, 18548.068604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33965.584778, 17691.874756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25422.534180, 17686.474426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29486.539734, 16542.095734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30435.006470, 15948.934311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30503.400024, 14901.371262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30684.733215, 14377.625580, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 07:20:06 2012] Writing fullrun_pn_xmm0134531601_pi300-10000_pass1_cl_src4.gif
[Thu Sep  6 07:24:40 2012] Mean detx,y = (7822.83, 11280.68) 
[Thu Sep  6 07:24:42 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 07:25:38 2012] grppha failed
[Thu Sep  6 07:25:39 2012] Setting source spectrum file to fullrun_pn_xmm0134531601_pi300-10000_pass1_cl_src4_src.pi.gz
[Thu Sep  6 07:25:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0134531601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Sep  6 08:51:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep  6 08:51:54 2012] rmf not generated due to insufficient counts
[Thu Sep  6 09:56:16 2012] Updating aperture counts using extracted products
[Thu Sep  6 09:56:16 2012] Error reading totcts from fullrun_pn_xmm0134531601_pi300-10000_pass1_cl_src4_src.pi.gz
[Thu Sep  6 09:56:17 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 09:56:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Sep  6 09:56:26 2012] xmm0134531601/analysis//spectral/fullrun_pn_xmm0134531601_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete