[Wed Sep  5 12:15:58 2012] Detection parameters:
  Position = (185.4, 268.9) = 5 36 4.56 -5 9 28.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1933.7 +/- 53.3
  Background counts = 24.3
  Rate = 0.1 +/- 0.003

[Wed Sep  5 12:16:01 2012] Off-axis axis estimate = 8.47'
[Wed Sep  5 12:20:59 2012] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 12:20:59 2012] Initial guess for spatial extent in simple fitting = 10.66"
[Wed Sep  5 12:20:59 2012] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.033
[Wed Sep  5 12:20:59 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 10.66"
[Wed Sep  5 15:20:26 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_src12.ximg exists
[Wed Sep  5 15:20:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_src12.csv
[Wed Sep  5 15:20:26 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed Sep  5 15:20:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_src12.csv
[Wed Sep  5 15:20:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 15:20:28 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed Sep  5 15:20:28 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Sep  5 15:20:28 2012] Fit fullrun_pn_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Wed Sep  5 22:14:06 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 14.437285 pixels away
[Wed Sep  5 22:14:06 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 22:14:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 22:14:06 2012] Assessing source extent using major
[Wed Sep  5 22:14:06 2012] Source does appear to be extended
[Wed Sep  5 22:14:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 22:15:21 2012] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 22:15:21 2012] Initial guess for spatial extent in simple fitting = 10.66"
[Wed Sep  5 22:15:21 2012] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.033
[Wed Sep  5 22:15:21 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 10.66"
[Thu Sep  6 01:38:19 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_src12.ximg exists
[Thu Sep  6 01:38:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_src12.csv
[Thu Sep  6 01:38:19 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu Sep  6 01:38:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_src12.csv
[Thu Sep  6 01:38:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 01:38:21 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu Sep  6 01:38:21 2012] fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Sep  6 01:38:21 2012] Fit fullrun_pn_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Thu Sep  6 07:19:06 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 13.380595 pixels away
[Thu Sep  6 07:19:07 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 07:19:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 07:19:07 2012] Assessing source extent using major
[Thu Sep  6 07:19:07 2012] Source does appear to be extended
[Thu Sep  6 07:19:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 07:20:07 2012] Counts = 1933.727051, rescaling region sizes by 2.000000
[Thu Sep  6 07:20:07 2012] XMMSAS src. selection expression = ellipse(16078.643112, 23344.163971, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Sep  6 07:20:07 2012] Writing source region out to fullrun_pn_xmm0134531601_pi300-10000_pass1_cl_src12_src.reg
[Thu Sep  6 07:20:07 2012] Extracting stamp from image fullrun_pn_xmm0134531601_pi300-10000_cl_sm2.00.img.gz, (110, 194) - (260, 344)
[Thu Sep  6 07:20:07 2012] XMMSAS bgd. selection expression = annulus(16078.643112, 23344.163971, 4350.000000, 8700.000000, X, Y) && !ellipse(22453.473328, 23547.831268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19950.169662, 24921.482361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20109.783400, 26125.303980, 510.163215, 386.872011, 84.595160, X, Y) && !ellipse(21972.021340, 25960.695680, 463.581613, 463.581613, 0.000000, X, Y) && !ellipse(21103.388660, 22090.165200, 465.863213, 465.863213, 0.000000, X, Y) && !ellipse(19752.007568, 28985.471985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19734.441895, 28251.595337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11851.090408, 28465.221649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24112.521484, 26852.373657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23725.649200, 26222.640533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10090.707748, 26149.215698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16662.419580, 25578.214800, 502.794414, 502.794414, 0.000000, X, Y) && !ellipse(23695.299561, 23985.597809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22845.844177, 22493.574890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24265.036987, 22124.265625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21606.991577, 21724.420868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22598.998138, 20400.705566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12333.576935, 20665.880600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23765.248237, 19469.661129, 478.657772, 394.601951, 23.004588, X, Y) && !ellipse(19598.570770, 19156.248199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21210.424800, 18737.927800, 433.320812, 433.320812, 0.000000, X, Y) && !ellipse(20096.877289, 16500.856491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12932.222321, 16044.754318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25548.462219, 15422.184464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20836.863159, 32761.255524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25305.192505, 30932.975800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19042.068665, 29624.141937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22391.587250, 27874.764374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19009.261795, 26932.836975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9503.279198, 25347.686249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23855.793427, 25073.087189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23833.674377, 22741.137787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25225.810000, 13945.114000, 1773.448051, 1773.448051, 0.000000, X, Y) && !ellipse(11804.420303, 22368.884094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25422.534180, 17686.474426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16556.191284, 16216.420547, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 07:20:07 2012] Writing fullrun_pn_xmm0134531601_pi300-10000_pass1_cl_src12.gif
[Thu Sep  6 07:34:39 2012] Mean detx,y = (-10825.78, 4286.67) 
[Thu Sep  6 07:34:42 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 07:36:39 2012] grppha failed
[Thu Sep  6 07:36:39 2012] Setting source spectrum file to fullrun_pn_xmm0134531601_pi300-10000_pass1_cl_src12_src.pi.gz
[Thu Sep  6 07:36:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0134531601_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Sep  6 08:51:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep  6 08:51:55 2012] rmf not generated due to insufficient counts
[Thu Sep  6 09:56:16 2012] Updating aperture counts using extracted products
[Thu Sep  6 09:56:16 2012] Error reading totcts from fullrun_pn_xmm0134531601_pi300-10000_pass1_cl_src12_src.pi.gz
[Thu Sep  6 09:56:17 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 09:56:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Sep  6 09:56:26 2012] xmm0134531601/analysis//spectral/fullrun_pn_xmm0134531601_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete