[Wed Sep  5 12:17:56 2012] Detection parameters:
  Position = (231.4, 300.8) = 5 35 51.15 -5 7 9.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1020.2 +/- 37.5
  Background counts = 10.9
  Rate = 0.07 +/- 0.003

[Wed Sep  5 12:17:59 2012] Off-axis axis estimate = 4.86'
[Wed Sep  5 18:36:39 2012] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 18:36:39 2012] Initial guess for spatial extent in simple fitting = 8.86"
[Wed Sep  5 18:36:39 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.971
[Wed Sep  5 18:36:39 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 8.86"
[Wed Sep  5 22:13:40 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src12.ximg exists
[Wed Sep  5 22:13:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src12.csv
[Wed Sep  5 22:13:40 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed Sep  5 22:13:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src12.csv
[Wed Sep  5 22:13:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 22:13:42 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed Sep  5 22:13:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed Sep  5 22:13:42 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Sep  5 22:13:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed Sep  5 22:13:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 22:14:44 2012] Spatial fit model total counts = 1243.780000, observed total counts = 1109.000000
[Wed Sep  5 22:14:44 2012] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Sep  5 22:14:44 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 22:14:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 22:14:44 2012] Assessing source extent using major
[Wed Sep  5 22:14:44 2012] Source does appear to be extended
[Wed Sep  5 22:14:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 04:38:06 2012] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 04:38:06 2012] Initial guess for spatial extent in simple fitting = 8.86"
[Thu Sep  6 04:38:06 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.971
[Thu Sep  6 04:38:06 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 8.86"
[Thu Sep  6 07:18:49 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src12.ximg exists
[Thu Sep  6 07:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src12.csv
[Thu Sep  6 07:18:49 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu Sep  6 07:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src12.csv
[Thu Sep  6 07:18:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 07:18:50 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu Sep  6 07:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src12.csv
[Thu Sep  6 07:18:50 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Sep  6 07:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src12.csv
[Thu Sep  6 07:18:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 07:19:32 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 11.362745 pixels away
[Thu Sep  6 07:19:32 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 07:19:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 07:19:32 2012] Assessing source extent using major
[Thu Sep  6 07:19:32 2012] Source does appear to be extended
[Thu Sep  6 07:19:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 09:27:20 2012] Counts = 1020.173889, rescaling region sizes by 2.000000
[Thu Sep  6 09:27:20 2012] XMMSAS src. selection expression = ellipse(20084.137131, 26123.329163, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Sep  6 09:27:20 2012] Writing source region out to fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src8_src.reg
[Thu Sep  6 09:27:20 2012] Extracting stamp from image fullrun_mos2_xmm0134531601_pi300-10000_cl_sm2.00.img.gz, (156, 226) - (306, 376)
[Thu Sep  6 09:27:20 2012] XMMSAS bgd. selection expression = annulus(20084.137131, 26123.329163, 4350.000000, 8700.000000, X, Y) && !ellipse(22449.292400, 23565.164000, 407.787212, 407.787212, 0.000000, X, Y) && !ellipse(29028.520630, 20045.555573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28361.137800, 21668.010600, 453.088013, 399.560811, 359.706000, X, Y) && !ellipse(19928.452850, 24919.706146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21100.988000, 22096.508000, 379.265611, 379.265611, 0.000000, X, Y) && !ellipse(28629.751200, 25087.167400, 414.231776, 414.231776, 0.000000, X, Y) && !ellipse(27522.643768, 24307.111237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21957.231380, 25960.629600, 433.170412, 433.170412, 0.000000, X, Y) && !ellipse(29385.829163, 18757.854416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28952.973771, 23592.296822, 659.215593, 415.631434, 191.069520, X, Y) && !ellipse(25815.941200, 23337.581000, 387.776916, 387.776916, 0.000000, X, Y) && !ellipse(16080.845459, 23284.736450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19631.904720, 28563.806400, 487.692014, 487.692014, 0.000000, X, Y) && !ellipse(24438.003600, 29125.099600, 391.116811, 391.116811, 0.000000, X, Y) && !ellipse(19182.205700, 29577.784400, 529.440815, 529.440815, 0.000000, X, Y) && !ellipse(23763.934723, 19455.594788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27818.560400, 23352.183800, 369.186892, 369.186892, 0.000000, X, Y) && !ellipse(16639.260513, 25535.513641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27660.992035, 25178.279449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27778.500977, 21711.906387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27340.383972, 21379.321487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26704.998000, 27426.686600, 375.008811, 375.008811, 0.000000, X, Y) && !ellipse(24267.579400, 22111.722800, 334.933610, 334.933610, 0.000000, X, Y) && !ellipse(24493.645630, 33188.072723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22619.710022, 20394.581741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28044.951752, 20287.854874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11857.118652, 28560.279663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23198.238251, 23875.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21610.676758, 21722.972549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19664.927917, 19172.624420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25325.038849, 33732.682953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27056.914459, 27966.211548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13906.376465, 34022.744904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21203.970078, 18727.595047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28828.748340, 17353.754000, 269.158408, 269.158408, 0.000000, X, Y) && !ellipse(24636.021800, 19756.909000, 558.704816, 161.584805, 205.534000, X, Y) && !ellipse(24424.110413, 29585.628082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24128.878440, 26867.249800, 368.114411, 368.114411, 0.000000, X, Y) && !ellipse(23708.641083, 23979.398315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26101.860596, 19685.844238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28837.154083, 26292.292572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23859.013977, 25062.018372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28902.720032, 23012.088837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22803.228302, 22492.836792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26963.404327, 33659.271393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23866.073700, 35171.257477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23667.456268, 26208.271515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27221.106781, 23032.118378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24817.830017, 21260.866028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14163.678009, 30344.055786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22383.452240, 27874.214783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25899.260620, 34436.544495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25978.319427, 28687.036072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25701.577759, 17442.599365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23108.192932, 26978.479584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23818.941620, 22708.802185, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 09:27:20 2012] Writing fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src8.gif
[Thu Sep  6 09:31:38 2012] Mean detx,y = (7092.45, -2065.37) 
[Thu Sep  6 09:31:39 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 09:32:44 2012] grppha failed
[Thu Sep  6 09:32:44 2012] Setting source spectrum file to fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src8_src.pi.gz
[Thu Sep  6 09:32:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu Sep  6 09:55:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep  6 09:55:38 2012] rmf not generated due to insufficient counts
[Thu Sep  6 09:56:19 2012] Updating aperture counts using extracted products
[Thu Sep  6 09:56:19 2012] Error reading totcts from fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src8_src.pi.gz
[Thu Sep  6 09:56:20 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 09:56:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Sep  6 09:56:25 2012] xmm0134531601/analysis//spectral/fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete