[Wed Sep 5 12:17:56 2012] Detection parameters: Position = (343.3, 174.9) = 5 35 18.56 -5 16 15.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 469.4 +/- 28.9 Background counts = 22.7 Rate = 0.04 +/- 0.002 [Wed Sep 5 12:17:59 2012] Off-axis axis estimate = 9.53' [Wed Sep 5 18:36:39 2012] Using EEF radius (= 11.19 ")to estimate initial spatial extent for simple fitting [Wed Sep 5 18:36:39 2012] Initial guess for spatial extent in simple fitting = 11.19" [Wed Sep 5 18:36:39 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.953 [Wed Sep 5 18:36:39 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 11.19" [Wed Sep 5 22:13:40 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src16.ximg exists [Wed Sep 5 22:13:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src16.csv [Wed Sep 5 22:13:40 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src16_1.ximg exists [Wed Sep 5 22:13:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src16.csv [Wed Sep 5 22:13:40 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src16_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 5 22:13:42 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src16.ximg exists [Wed Sep 5 22:13:42 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists [Wed Sep 5 22:13:42 2012] Fit fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly [Wed Sep 5 22:14:44 2012] Warning, spatial fit 16 centroid is now closest to src. 6 [Wed Sep 5 22:14:44 2012] Vigneting correction estimate = 1.000000 [Wed Sep 5 22:14:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Sep 5 22:14:44 2012] Assessing source extent using major [Wed Sep 5 22:14:44 2012] Source does appear to be extended [Wed Sep 5 22:14:44 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Sep 5 22:14:44 2012] Source is confused with source 5 [Thu Sep 6 04:38:06 2012] Using EEF radius (= 11.19 ")to estimate initial spatial extent for simple fitting [Thu Sep 6 04:38:06 2012] Initial guess for spatial extent in simple fitting = 11.19" [Thu Sep 6 04:38:06 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.953 [Thu Sep 6 04:38:06 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 11.19" [Thu Sep 6 07:18:49 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src16.ximg exists [Thu Sep 6 07:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src16.csv [Thu Sep 6 07:18:49 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src16_1.ximg exists [Thu Sep 6 07:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src16.csv [Thu Sep 6 07:18:49 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src16_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Sep 6 07:18:50 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src16.ximg exists [Thu Sep 6 07:18:50 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists [Thu Sep 6 07:18:50 2012] Fit fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly [Thu Sep 6 07:19:32 2012] Warning, spatial fit 16 centroid is now closest to src. 5 [Thu Sep 6 07:19:32 2012] Source 37 is offset by 4.561446 and 7.423635 pixels which is larger than 2 X fitted extent = 2.983600 x 4.045706, not incorporating fit results [Thu Sep 6 07:19:32 2012] Warning: source 74 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 11.987423 pixels away [Thu Sep 6 07:19:32 2012] Source 37 is offset by 7.382688 and -0.106296 pixels which is larger than 2 X fitted extent = 1.254285 x 1.254285, not incorporating fit results [Thu Sep 6 07:19:32 2012] Vigneting correction estimate = 1.000000 [Thu Sep 6 07:19:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Sep 6 07:19:32 2012] Assessing source extent using major [Thu Sep 6 07:19:32 2012] Source does appear to be extended [Thu Sep 6 07:19:32 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Sep 6 09:27:20 2012] XMMSAS src. selection expression = ellipse(29822.809814, 15164.268280, 652.500000, 652.500000, 0.000000, X, Y) [Thu Sep 6 09:27:20 2012] Writing source region out to fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src37_src.reg [Thu Sep 6 09:27:20 2012] Extracting stamp from image fullrun_mos2_xmm0134531601_pi300-10000_cl_sm2.00.img.gz, (306, 137) - (381, 212) [Thu Sep 6 09:27:20 2012] XMMSAS bgd. selection expression = annulus(29822.809814, 15164.268280, 1087.500000, 2175.000000, X, Y) && !ellipse(29487.040000, 14206.134000, 481.410414, 481.410414, 0.000000, X, Y) && !ellipse(29849.686200, 14742.144000, 476.652814, 476.652814, 0.000000, X, Y) && !ellipse(31536.559540, 16214.599197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30148.873962, 13503.803665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31888.231260, 14330.645000, 350.985610, 350.985610, 0.000000, X, Y) && !ellipse(28850.678520, 16690.885800, 320.192809, 320.192809, 0.000000, X, Y) && !ellipse(27154.943451, 14128.772339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28078.475200, 14298.894400, 324.758409, 324.758409, 0.000000, X, Y) && !ellipse(31777.109400, 14249.008000, 1494.424043, 1494.424043, 0.000000, X, Y) && !ellipse(30630.112600, 16726.834400, 388.748811, 388.748811, 0.000000, X, Y) && !ellipse(30588.368000, 13434.026000, 1317.664038, 1317.664038, 0.000000, X, Y) && !ellipse(30030.491516, 15972.426010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31006.225403, 13791.320770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28828.748340, 17353.754000, 269.158408, 269.158408, 0.000000, X, Y) && !ellipse(27041.132965, 13034.613525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29435.106506, 16527.848846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29783.462280, 16972.106934, 870.000000, 870.000000, 0.000000, X, Y) [Thu Sep 6 09:27:20 2012] Writing fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src37.gif [Thu Sep 6 09:34:20 2012] Mean detx,y = (-3091.26, -12463.06) [Thu Sep 6 09:34:21 2012] Setting backscal keywords in source and bgd. spectrum [Thu Sep 6 09:34:26 2012] grppha failed [Thu Sep 6 09:34:26 2012] Setting source spectrum file to fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src37_src.pi.gz [Thu Sep 6 09:34:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src37_bgd.pi.gz [Thu Sep 6 09:55:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu Sep 6 09:55:38 2012] rmf not generated due to insufficient counts [Thu Sep 6 09:56:19 2012] Updating aperture counts using extracted products [Thu Sep 6 09:56:19 2012] Error reading totcts from fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src37_src.pi.gz [Thu Sep 6 09:56:20 2012] No arf file for this source, not re-computing flux [Thu Sep 6 09:56:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu Sep 6 09:56:25 2012] xmm0134531601/analysis//spectral/fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete