[Wed Sep  5 12:17:56 2012] Detection parameters:
  Position = (334.2, 231.0) = 5 35 21.22 -5 12 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1975.9 +/- 53.7
  Background counts = 13.1
  Rate = 0.1 +/- 0.003

[Wed Sep  5 12:17:59 2012] Off-axis axis estimate = 5.54'
[Wed Sep  5 18:36:39 2012] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 18:36:39 2012] Initial guess for spatial extent in simple fitting = 9.20"
[Wed Sep  5 18:36:39 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.914
[Wed Sep  5 18:36:39 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.20"
[Wed Sep  5 22:13:40 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src4.ximg exists
[Wed Sep  5 22:13:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src4.csv
[Wed Sep  5 22:13:40 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Sep  5 22:13:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src4.csv
[Wed Sep  5 22:13:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 22:13:42 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Sep  5 22:13:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Sep  5 22:13:42 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Sep  5 22:13:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Sep  5 22:13:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 22:14:44 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.567774 pixels away
[Wed Sep  5 22:14:44 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 22:14:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 22:14:44 2012] Assessing source extent using major
[Wed Sep  5 22:14:44 2012] Source does appear to be extended
[Wed Sep  5 22:14:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 04:38:06 2012] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 04:38:06 2012] Initial guess for spatial extent in simple fitting = 9.20"
[Thu Sep  6 04:38:06 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.914
[Thu Sep  6 04:38:06 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 9.20"
[Thu Sep  6 07:18:49 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src4.ximg exists
[Thu Sep  6 07:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src4.csv
[Thu Sep  6 07:18:49 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Sep  6 07:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src4.csv
[Thu Sep  6 07:18:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 07:18:50 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Sep  6 07:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Sep  6 07:18:50 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Sep  6 07:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Sep  6 07:18:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 07:19:31 2012] Warning, spatial fit 4 centroid is now closest to src. 33
[Thu Sep  6 07:19:32 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 07:19:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 07:19:32 2012] Assessing source extent using major
[Thu Sep  6 07:19:32 2012] Source does appear to be extended
[Thu Sep  6 07:19:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 09:27:19 2012] Counts = 1975.866943, rescaling region sizes by 2.000000
[Thu Sep  6 09:27:19 2012] XMMSAS src. selection expression = ellipse(29028.520630, 20045.555573, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Sep  6 09:27:19 2012] Writing source region out to fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src3_src.reg
[Thu Sep  6 09:27:19 2012] Extracting stamp from image fullrun_mos2_xmm0134531601_pi300-10000_cl_sm2.00.img.gz, (259, 156) - (409, 306)
[Thu Sep  6 09:27:19 2012] XMMSAS bgd. selection expression = annulus(29028.520630, 20045.555573, 4350.000000, 8700.000000, X, Y) && !ellipse(34090.463200, 24862.633400, 479.383214, 479.383214, 0.000000, X, Y) && !ellipse(29487.040000, 14206.134000, 481.410414, 481.410414, 0.000000, X, Y) && !ellipse(22449.292400, 23565.164000, 407.787212, 407.787212, 0.000000, X, Y) && !ellipse(29849.686200, 14742.144000, 476.652814, 476.652814, 0.000000, X, Y) && !ellipse(28361.137800, 21668.010600, 453.088013, 399.560811, 359.706000, X, Y) && !ellipse(19928.452850, 24919.706146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21100.988000, 22096.508000, 379.265611, 379.265611, 0.000000, X, Y) && !ellipse(28629.751200, 25087.167400, 414.231776, 414.231776, 0.000000, X, Y) && !ellipse(33816.792980, 16896.669152, 622.963776, 396.019254, 332.078414, X, Y) && !ellipse(34664.295184, 15758.859200, 539.488016, 539.488016, 0.000000, X, Y) && !ellipse(20084.137131, 26123.329163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27522.643768, 24307.111237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21957.231380, 25960.629600, 433.170412, 433.170412, 0.000000, X, Y) && !ellipse(31536.559540, 16214.599197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29385.829163, 18757.854416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29822.809814, 15164.268280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25994.216000, 16027.216000, 315.792809, 315.792809, 0.000000, X, Y) && !ellipse(28952.973771, 23592.296822, 659.215593, 415.631434, 191.069520, X, Y) && !ellipse(25815.941200, 23337.581000, 387.776916, 387.776916, 0.000000, X, Y) && !ellipse(36328.669708, 20866.923401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32639.941000, 26558.736000, 429.150412, 429.150412, 0.000000, X, Y) && !ellipse(24438.003600, 29125.099600, 391.116811, 391.116811, 0.000000, X, Y) && !ellipse(25583.479401, 15420.145401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23763.934723, 19455.594788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27818.560400, 23352.183800, 369.186892, 369.186892, 0.000000, X, Y) && !ellipse(27660.992035, 25178.279449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27778.500977, 21711.906387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30148.873962, 13503.803665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35929.122600, 23357.200000, 381.601611, 381.601611, 0.000000, X, Y) && !ellipse(31888.231260, 14330.645000, 350.985610, 350.985610, 0.000000, X, Y) && !ellipse(27340.383972, 21379.321487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38242.276764, 21290.266495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27522.080902, 10570.721115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26704.998000, 27426.686600, 375.008811, 375.008811, 0.000000, X, Y) && !ellipse(34136.467773, 16223.983398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31391.805800, 23501.101800, 382.403211, 382.403211, 0.000000, X, Y) && !ellipse(24267.579400, 22111.722800, 334.933610, 334.933610, 0.000000, X, Y) && !ellipse(34987.634800, 23254.774200, 551.745616, 551.745616, 0.000000, X, Y) && !ellipse(34397.053589, 28176.927948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28850.678520, 16690.885800, 320.192809, 320.192809, 0.000000, X, Y) && !ellipse(27154.943451, 14128.772339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28078.475200, 14298.894400, 324.758409, 324.758409, 0.000000, X, Y) && !ellipse(22619.710022, 20394.581741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28044.951752, 20287.854874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32756.714640, 29070.735000, 416.269612, 416.269612, 0.000000, X, Y) && !ellipse(31777.109400, 14249.008000, 1494.424043, 1494.424043, 0.000000, X, Y) && !ellipse(28337.926270, 12053.751450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25964.664600, 11957.858000, 526.624815, 244.905607, 189.604000, X, Y) && !ellipse(26511.380280, 14832.291382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30630.112600, 16726.834400, 388.748811, 388.748811, 0.000000, X, Y) && !ellipse(23198.238251, 23875.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37349.000122, 22167.522690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21610.676758, 21722.972549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30588.368000, 13434.026000, 1317.664038, 1317.664038, 0.000000, X, Y) && !ellipse(19664.927917, 19172.624420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21484.166800, 12928.152800, 500.207590, 500.207590, 0.000000, X, Y) && !ellipse(27056.914459, 27966.211548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30030.491516, 15972.426010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31644.968000, 11491.597800, 1462.320042, 1462.320042, 0.000000, X, Y) && !ellipse(21203.970078, 18727.595047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31006.225403, 13791.320770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28828.748340, 17353.754000, 269.158408, 269.158408, 0.000000, X, Y) && !ellipse(36531.469400, 27504.000000, 328.646409, 328.646409, 0.000000, X, Y) && !ellipse(20101.732010, 16547.050018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24636.021800, 19756.909000, 558.704816, 161.584805, 205.534000, X, Y) && !ellipse(24424.110413, 29585.628082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24128.878440, 26867.249800, 368.114411, 368.114411, 0.000000, X, Y) && !ellipse(33094.695343, 21206.402084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23314.355957, 13760.592789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23708.641083, 23979.398315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26101.860596, 19685.844238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36671.112732, 25444.517822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28837.154083, 26292.292572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23859.013977, 25062.018372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28902.720032, 23012.088837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22803.228302, 22492.836792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31437.099487, 11759.527740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25836.272705, 14748.595566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27041.132965, 13034.613525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23667.456268, 26208.271515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25433.218018, 16463.728561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26388.755096, 15362.491440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35610.728546, 28210.460968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27221.106781, 23032.118378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33302.950531, 21939.405228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24817.830017, 21260.866028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29435.106506, 16527.848846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34024.637939, 22832.797363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33967.416748, 13462.107758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22383.452240, 27874.214783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29783.462280, 16972.106934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25978.319427, 28687.036072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25701.577759, 17442.599365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35865.136108, 13528.949448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23954.204742, 12859.299286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23108.192932, 26978.479584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30945.860657, 26428.081390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30146.468506, 11328.947037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23818.941620, 22708.802185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36129.043365, 17225.832153, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 09:27:19 2012] Writing fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src3.gif
[Thu Sep  6 09:28:27 2012] Mean detx,y = (-2095.22, -7489.43) 
[Thu Sep  6 09:28:28 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 09:29:09 2012] grppha failed
[Thu Sep  6 09:29:09 2012] Setting source spectrum file to fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src3_src.pi.gz
[Thu Sep  6 09:29:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Sep  6 09:55:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep  6 09:55:37 2012] rmf not generated due to insufficient counts
[Thu Sep  6 09:56:19 2012] Updating aperture counts using extracted products
[Thu Sep  6 09:56:19 2012] Error reading totcts from fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src3_src.pi.gz
[Thu Sep  6 09:56:20 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 09:56:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Sep  6 09:56:25 2012] xmm0134531601/analysis//spectral/fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete