[Wed Sep  5 12:17:58 2012] Detection parameters:
  Position = (267.2, 275.0) = 5 35 40.73 -5 9 1.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.2 +/- 15.9
  Background counts = 13.6
  Rate = 0.007 +/- 0.0009

[Wed Sep  5 12:17:59 2012] Off-axis axis estimate = 2.83'
[Wed Sep  5 18:36:40 2012] Using EEF radius (= 7.84 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 18:36:40 2012] Initial guess for spatial extent in simple fitting = 7.84"
[Wed Sep  5 18:36:40 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.942
[Wed Sep  5 18:36:40 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 7.84"
[Wed Sep  5 22:13:41 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src71.ximg exists
[Wed Sep  5 22:13:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src71.csv
[Wed Sep  5 22:13:41 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src71_1.ximg exists
[Wed Sep  5 22:13:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src71.csv
[Wed Sep  5 22:13:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 22:13:43 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Wed Sep  5 22:13:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src71.csv
[Wed Sep  5 22:13:43 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Wed Sep  5 22:13:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src71.csv
[Wed Sep  5 22:13:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 22:14:44 2012] Warning, spatial fit 71 centroid is now closest to src. 99
[Wed Sep  5 22:14:44 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 22:14:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 22:14:44 2012] Assessing source extent using major
[Wed Sep  5 22:14:44 2012] Source does appear to be extended
[Wed Sep  5 22:14:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 22:14:44 2012] Source is confused with source 99
[Thu Sep  6 04:38:06 2012] Using EEF radius (= 7.84 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 04:38:06 2012] Initial guess for spatial extent in simple fitting = 7.84"
[Thu Sep  6 04:38:06 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.942
[Thu Sep  6 04:38:06 2012] Giving source the simple spatial ID 68 for pass 1, mean size = 7.84"
[Thu Sep  6 07:18:50 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src68.ximg exists
[Thu Sep  6 07:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src68.csv
[Thu Sep  6 07:18:50 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src68_1.ximg exists
[Thu Sep  6 07:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src68.csv
[Thu Sep  6 07:18:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 07:18:51 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Thu Sep  6 07:18:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src68.csv
[Thu Sep  6 07:18:51 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Thu Sep  6 07:18:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src68.csv
[Thu Sep  6 07:18:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 07:19:32 2012] Source 100 is offset by 7.416968 and 3.668445 pixels which is larger than
2 X fitted extent = 1.957058 x 1.957058, not incorporating fit results
[Thu Sep  6 07:19:32 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 07:19:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 07:19:32 2012] Assessing source extent using major
[Thu Sep  6 07:19:32 2012] Source does appear to be extended
[Thu Sep  6 07:19:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 09:27:21 2012] XMMSAS src. selection expression = ellipse(23198.238251, 23875.870758, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Sep  6 09:27:21 2012] Writing source region out to fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src100_src.reg
[Thu Sep  6 09:27:21 2012] Extracting stamp from image fullrun_mos2_xmm0134531601_pi300-10000_cl_sm2.00.img.gz, (230, 237) - (305, 312)
[Thu Sep  6 09:27:21 2012] XMMSAS bgd. selection expression = annulus(23198.238251, 23875.870758, 1087.500000, 2175.000000, X, Y) && !ellipse(22449.292400, 23565.164000, 407.787212, 407.787212, 0.000000, X, Y) && !ellipse(21100.988000, 22096.508000, 379.265611, 379.265611, 0.000000, X, Y) && !ellipse(21957.231380, 25960.629600, 433.170412, 433.170412, 0.000000, X, Y) && !ellipse(24267.579400, 22111.722800, 334.933610, 334.933610, 0.000000, X, Y) && !ellipse(21610.676758, 21722.972549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23708.641083, 23979.398315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23859.013977, 25062.018372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22803.228302, 22492.836792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23667.456268, 26208.271515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24817.830017, 21260.866028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23818.941620, 22708.802185, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 09:27:21 2012] Writing fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src100.gif
[Thu Sep  6 09:42:09 2012] Mean detx,y = (3956.98, -3810.21) 
[Thu Sep  6 09:42:10 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 09:42:15 2012] grppha failed
[Thu Sep  6 09:42:15 2012] Setting source spectrum file to fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src100_src.pi.gz
[Thu Sep  6 09:42:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src100_bgd.pi.gz
[Thu Sep  6 09:55:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep  6 09:55:43 2012] rmf not generated due to insufficient counts
[Thu Sep  6 09:56:19 2012] Updating aperture counts using extracted products
[Thu Sep  6 09:56:19 2012] Error reading totcts from fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src100_src.pi.gz
[Thu Sep  6 09:56:20 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 09:56:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Sep  6 09:56:25 2012] xmm0134531601/analysis//spectral/fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src100_pl.csv not found, spectral fit skipped or did not complete