[Wed Sep 5 12:17:56 2012] Detection parameters: Position = (258.6, 271.2) = 5 35 43.25 -5 9 17.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 2363.1 +/- 59.1 Background counts = 12.8 Rate = 0.1 +/- 0.003 [Wed Sep 5 12:17:59 2012] Off-axis axis estimate = 3.50' [Wed Sep 5 18:36:39 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting [Wed Sep 5 18:36:39 2012] Initial guess for spatial extent in simple fitting = 8.18" [Wed Sep 5 18:36:39 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.103 [Wed Sep 5 18:36:39 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.18" [Wed Sep 5 22:13:40 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src3.ximg exists [Wed Sep 5 22:13:40 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src3_1.ximg exists [Wed Sep 5 22:13:40 2012] Fit fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_src3 appears to have run properly [Wed Sep 5 22:13:42 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Wed Sep 5 22:13:42 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Wed Sep 5 22:13:42 2012] Fit fullrun_mos2_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly [Wed Sep 5 22:14:44 2012] Spatial fit model total counts = 2170.110000, observed total counts = 2168.000000 [Wed Sep 5 22:14:44 2012] Offset between fit and detection position for source 1 = 0.153569 pixels [Wed Sep 5 22:14:44 2012] 2189.871000 total counts/ 586.751000 bgd. counts: snr = 66.181882 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.153569 pixels Position = (258.6, 271.4) = 5 35 43.24 -5 9 17.7 Extent = 5.4" x 4.7", rotation angle = 32 Source counts = 1603.1 +/- 46.8 Background counts = 586.8 Rate = 0.07 +/- 0.002 [Wed Sep 5 22:14:44 2012] Vigneting correction estimate = 1.000000 [Wed Sep 5 22:14:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Sep 5 22:14:44 2012] Assessing source extent using major [Wed Sep 5 22:14:44 2012] Source does appear to be extended [Wed Sep 5 22:14:44 2012] Computing asymmetry using major and minor axis, asym = 1.16 [Thu Sep 6 04:38:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Thu Sep 6 04:38:06 2012] Initial guess for spatial extent in simple fitting = 5.06" [Thu Sep 6 04:38:06 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.814 [Thu Sep 6 04:38:06 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.06" [Thu Sep 6 07:18:49 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src3.ximg exists [Thu Sep 6 07:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src3.csv [Thu Sep 6 07:18:49 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src3_1.ximg exists [Thu Sep 6 07:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src3.csv [Thu Sep 6 07:18:49 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src3_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Sep 6 07:18:50 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists [Thu Sep 6 07:18:50 2012] fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists [Thu Sep 6 07:18:50 2012] Fit fullrun_mos2_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly [Thu Sep 6 07:19:31 2012] Spatial fit model total counts = 2184.340000, observed total counts = 2191.000000 [Thu Sep 6 07:19:31 2012] Offset between fit and detection position for source 1 = 0.026486 pixels [Thu Sep 6 07:19:31 2012] 2199.696000 total counts/ 601.266000 bgd. counts: snr = 65.186896 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.026486 pixels Position = (258.6, 271.4) = 5 35 43.24 -5 9 17.6 Extent = 5.1 (4.9-5.2)", rotation angle = 0 Source counts = 1598.4 +/- 46.9 Background counts = 601.3 Rate = 0.07 +/- 0.002 [Thu Sep 6 07:19:32 2012] Vigneting correction estimate = 1.000000 [Thu Sep 6 07:19:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Sep 6 07:19:32 2012] Assessing source extent using major axis lower bound [Thu Sep 6 07:19:32 2012] Source does appear to be extended [Thu Sep 6 07:19:32 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Sep 6 09:27:19 2012] Counts = 1598.430000, rescaling region sizes by 2.000000 [Thu Sep 6 09:27:19 2012] XMMSAS src. selection expression = ellipse(22449.292400, 23565.164000, 611.680818, 611.680818, 0.000000, X, Y) [Thu Sep 6 09:27:19 2012] Writing source region out to fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src1_src.reg [Thu Sep 6 09:27:19 2012] Extracting stamp from image fullrun_mos2_xmm0134531601_pi300-10000_cl_sm2.00.img.gz, (223, 236) - (294, 307) [Thu Sep 6 09:27:19 2012] XMMSAS bgd. selection expression = annulus(22449.292400, 23565.164000, 2038.936059, 4077.872117, X, Y) && !ellipse(19928.452850, 24919.706146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21100.988000, 22096.508000, 379.265611, 379.265611, 0.000000, X, Y) && !ellipse(20084.137131, 26123.329163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21957.231380, 25960.629600, 433.170412, 433.170412, 0.000000, X, Y) && !ellipse(25815.941200, 23337.581000, 387.776916, 387.776916, 0.000000, X, Y) && !ellipse(23763.934723, 19455.594788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27340.383972, 21379.321487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26704.998000, 27426.686600, 375.008811, 375.008811, 0.000000, X, Y) && !ellipse(24267.579400, 22111.722800, 334.933610, 334.933610, 0.000000, X, Y) && !ellipse(22619.710022, 20394.581741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23198.238251, 23875.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21610.676758, 21722.972549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19664.927917, 19172.624420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27056.914459, 27966.211548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21203.970078, 18727.595047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24636.021800, 19756.909000, 558.704816, 161.584805, 205.534000, X, Y) && !ellipse(24128.878440, 26867.249800, 368.114411, 368.114411, 0.000000, X, Y) && !ellipse(23708.641083, 23979.398315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26101.860596, 19685.844238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23859.013977, 25062.018372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22803.228302, 22492.836792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23667.456268, 26208.271515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27221.106781, 23032.118378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24817.830017, 21260.866028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22383.452240, 27874.214783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23108.192932, 26978.479584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23818.941620, 22708.802185, 870.000000, 870.000000, 0.000000, X, Y) [Thu Sep 6 09:27:19 2012] Writing fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src1.gif [Thu Sep 6 09:28:09 2012] Mean detx,y = (4575.99, -4086.19) [Thu Sep 6 09:28:10 2012] Setting backscal keywords in source and bgd. spectrum [Thu Sep 6 09:28:24 2012] grppha failed [Thu Sep 6 09:28:24 2012] Setting source spectrum file to fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src1_src.pi.gz [Thu Sep 6 09:28:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src1_bgd.pi.gz [Thu Sep 6 09:56:19 2012] Updating aperture counts using extracted products [Thu Sep 6 09:56:19 2012] Error reading totcts from fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src1_src.pi.gz [Thu Sep 6 09:56:20 2012] No arf file for this source, not re-computing flux [Thu Sep 6 09:56:24 2012] Source 1 has no response, skipping [Thu Sep 6 09:56:25 2012] xmm0134531601/analysis//spectral/fullrun_mos2_xmm0134531601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete