[Wed Sep  5 12:16:53 2012] Detection parameters:
  Position = (273.6, 224.1) = 5 35 38.88 -5 12 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 207.1 +/- 17.8
  Background counts = 9.2
  Rate = 0.01 +/- 0.0008

[Wed Sep  5 12:16:54 2012] Off-axis axis estimate = 5.68'
[Wed Sep  5 15:20:29 2012] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 15:20:29 2012] Initial guess for spatial extent in simple fitting = 9.27"
[Wed Sep  5 15:20:29 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.903
[Wed Sep  5 15:20:29 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 9.27"
[Wed Sep  5 18:36:37 2012] fullrun_mos1_xmm0134531601_pi300-10000_cl_pass0_src56.ximg exists
[Wed Sep  5 18:36:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0134531601_pi300-10000_cl_pass0_src56.csv
[Wed Sep  5 18:36:37 2012] fullrun_mos1_xmm0134531601_pi300-10000_cl_pass0_src56_1.ximg exists
[Wed Sep  5 18:36:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0134531601_pi300-10000_cl_pass0_src56.csv
[Wed Sep  5 18:36:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0134531601_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0134531601_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 18:36:39 2012] fullrun_mos1_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Wed Sep  5 18:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src56.csv
[Wed Sep  5 18:36:39 2012] fullrun_mos1_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Wed Sep  5 18:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src56.csv
[Wed Sep  5 18:36:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0134531601_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 22:14:25 2012] Warning, spatial fit 56 centroid is now closest to src. 120
[Wed Sep  5 22:14:26 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 22:14:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 22:14:26 2012] Assessing source extent using major
[Wed Sep  5 22:14:26 2012] Source does appear to be extended
[Wed Sep  5 22:14:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 01:38:22 2012] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 01:38:22 2012] Initial guess for spatial extent in simple fitting = 9.27"
[Thu Sep  6 01:38:22 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.903
[Thu Sep  6 01:38:22 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 9.27"
[Thu Sep  6 04:38:04 2012] fullrun_mos1_xmm0134531601_pi300-10000_cl_pass1_src56.ximg exists
[Thu Sep  6 04:38:04 2012] fullrun_mos1_xmm0134531601_pi300-10000_cl_pass1_src56_1.ximg exists
[Thu Sep  6 04:38:04 2012] Fit fullrun_mos1_xmm0134531601_pi300-10000_cl_pass1_src56 appears to have run properly
[Thu Sep  6 04:38:05 2012] fullrun_mos1_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Thu Sep  6 04:38:05 2012] fullrun_mos1_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Thu Sep  6 04:38:05 2012] Fit fullrun_mos1_xmm0134531601_pi300-10000_cl_pass1_tfrozen_src56 appears to have run properly
[Thu Sep  6 07:19:20 2012] Spatial fit model total counts = 317.572000, observed total counts = 301.000000
[Thu Sep  6 07:19:20 2012] Offset between fit and detection position for source 122 = 0.518654 pixels
[Thu Sep  6 07:19:20 2012] 314.697000 total counts/ 163.551000 bgd. counts: snr = 11.818709
Spatial fit parameters:
  Offset between fit and detection position for source 122 = 0.518654 pixels
  Position = (273.1, 224.2) = 5 35 39.03 -5 12 43.2
  Extent = 7.5 (6.1-9.6)" x 4.3 (3.5-5.2)", rotation angle = 31 (19-48) degrees
  Source counts = 151.1 +/- 17.7
  Background counts = 163.6
  Rate = 0.007 +/- 0.0008
[Thu Sep  6 07:19:20 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 07:19:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 07:19:20 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 07:19:20 2012] Source does appear to be extended
[Thu Sep  6 07:19:20 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.16
[Thu Sep  6 08:52:10 2012] XMMSAS src. selection expression = ellipse(23707.596220, 19453.268400, 451.045813, 258.389407, 31.425100, X, Y)
[Thu Sep  6 08:52:10 2012] Writing source region out to fullrun_mos1_xmm0134531601_pi300-10000_pass1_cl_src122_src.reg
[Thu Sep  6 08:52:10 2012] Extracting stamp from image fullrun_mos1_xmm0134531601_pi300-10000_cl_sm2.00.img.gz, (247, 198) - (299, 250)
[Thu Sep  6 08:52:10 2012] XMMSAS bgd. selection expression = annulus(23707.596220, 19453.268400, 751.743022, 1503.486043, X, Y) && !ellipse(22579.523740, 20382.317000, 428.906412, 428.906412, 0.000000, X, Y) && !ellipse(21569.851700, 21720.875076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24594.908400, 19793.032400, 333.424010, 333.424010, 0.000000, X, Y) && !ellipse(24815.424561, 21285.407791, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 08:52:10 2012] Writing fullrun_mos1_xmm0134531601_pi300-10000_pass1_cl_src122.gif
[Thu Sep  6 09:09:07 2012] Mean detx,y = (-7932.11, -3399.35) 
[Thu Sep  6 09:09:08 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 09:09:16 2012] grppha failed
[Thu Sep  6 09:09:16 2012] Setting source spectrum file to fullrun_mos1_xmm0134531601_pi300-10000_pass1_cl_src122_src.pi.gz
[Thu Sep  6 09:09:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0134531601_pi300-10000_pass1_cl_src122_bgd.pi.gz
[Thu Sep  6 09:56:18 2012] Updating aperture counts using extracted products
[Thu Sep  6 09:56:18 2012] Error reading totcts from fullrun_mos1_xmm0134531601_pi300-10000_pass1_cl_src122_src.pi.gz
[Thu Sep  6 09:56:19 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 09:56:23 2012] Source 122 has no response, skipping
[Thu Sep  6 09:56:24 2012] xmm0134531601/analysis//spectral/fullrun_mos1_xmm0134531601_pi300-10000_pass1_cl_src122_pl.csv not found, spectral fit skipped or did not complete