[Sat Jun 15 21:44:37 2013] Detection parameters:
  Position = (359.3, 332.0) = 5 28 17.72 -65 24 37.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.7 +/- 15.1
  Background counts = 25.2
  Rate = 0.003 +/- 0.0004

[Sat Jun 15 21:44:39 2013] Off-axis axis estimate = 5.04'
[Sat Jun 15 21:45:05 2013] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:45:05 2013] Initial guess for spatial extent in simple fitting = 8.95"
[Sat Jun 15 21:45:05 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.147
[Sat Jun 15 21:45:05 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 8.95"
[Sat Jun 15 21:45:06 2013] fullrun_mos2_xmm0134520301_pi300-10000_cl_pass0_src21.ximg exists
[Sat Jun 15 21:45:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134520301_pi300-10000_cl_pass0_src21.csv
[Sat Jun 15 21:45:06 2013] fullrun_mos2_xmm0134520301_pi300-10000_cl_pass0_src21_1.ximg exists
[Sat Jun 15 21:45:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134520301_pi300-10000_cl_pass0_src21.csv
[Sat Jun 15 21:45:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134520301_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134520301_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:45:08 2013] fullrun_mos2_xmm0134520301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sat Jun 15 21:45:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134520301_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sat Jun 15 21:45:08 2013] fullrun_mos2_xmm0134520301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sat Jun 15 21:45:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134520301_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sat Jun 15 21:45:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134520301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134520301_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:45:30 2013] Warning, spatial fit 21 centroid is now closest to src. 34
[Sat Jun 15 21:45:30 2013] Spatial fit model total counts = 580.031000, observed total counts = 554.000000
[Sat Jun 15 21:45:30 2013] Offset between fit and detection position for source 33 = 2.275777 pixels
[Sat Jun 15 21:45:30 2013] Warning, changing simple spatial fit ID from 21 to 36
[Sat Jun 15 21:45:30 2013] 519.398000 total counts/ 225.325000 bgd. counts: snr = 19.590723
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 2.275777 pixels
  Position = (357.4, 330.8) = 5 28 19.09 -65 24 43.1
  Extent = 17.2 (17.2-34.4)", rotation angle = 0
  Source counts = 294.1 +/- 22.8
  Background counts = 225.3
  Rate = 0.006 +/- 0.0005
[Sat Jun 15 21:45:30 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:45:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:45:30 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 21:45:30 2013] Source does appear to be extended
[Sat Jun 15 21:45:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:45:30 2013] Source is confused with source 34
[Sat Jun 15 21:45:41 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:45:41 2013] Initial guess for spatial extent in simple fitting = 17.21"
[Sat Jun 15 21:45:41 2013] source mask rpix=4.0, npix_max = 79, mask sum = 80, frac = 1.007
[Sat Jun 15 21:45:41 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 17.21"
[Sat Jun 15 21:45:42 2013] fullrun_mos2_xmm0134520301_pi300-10000_cl_pass1_src20.ximg exists
[Sat Jun 15 21:45:42 2013] fullrun_mos2_xmm0134520301_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat Jun 15 21:45:42 2013] Fit fullrun_mos2_xmm0134520301_pi300-10000_cl_pass1_src20 appears to have run properly
[Sat Jun 15 21:45:44 2013] fullrun_mos2_xmm0134520301_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat Jun 15 21:45:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134520301_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sat Jun 15 21:45:44 2013] fullrun_mos2_xmm0134520301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat Jun 15 21:45:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134520301_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sat Jun 15 21:45:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134520301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134520301_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:45:57 2013] Spatial fit model total counts = 1042.980000, observed total counts = 982.000000
[Sat Jun 15 21:45:57 2013] Offset between fit and detection position for source 33 = 2.512414 pixels
[Sat Jun 15 21:45:57 2013] 1027.692000 total counts/ 644.769000 bgd. counts: snr = 15.080279
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 2.512414 pixels
  Position = (359.5, 332.2) = 5 28 17.61 -65 24 37.2
  Extent = 34.4 (33.6-68.8)" x 5.8 (4.9-6.7)", rotation angle = 140 (139-142) degrees
  Source counts = 382.9 +/- 32.1
  Background counts = 644.8
  Rate = 0.008 +/- 0.0007
[Sat Jun 15 21:45:57 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:45:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:45:57 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 21:45:57 2013] Source does appear to be extended
[Sat Jun 15 21:45:57 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 5.01
[Sat Jun 15 21:45:57 2013] Source is asymmetric
[Sat Jun 15 21:46:21 2013] XMMSAS src. selection expression = ellipse(31225.942000, 28852.236400, 2065.464059, 346.531810, 140.027000, X, Y)
[Sat Jun 15 21:46:21 2013] Not overwriting source region fullrun_mos2_xmm0134520301_pi300-10000_pass1_cl_src33_src.reg
[Sat Jun 15 21:46:21 2013] Extracting stamp from image fullrun_mos2_xmm0134520301_pi300-10000_cl_sm2.00.img.gz, (241, 213) - (478, 451)
[Sat Jun 15 21:46:21 2013] XMMSAS bgd. selection expression = annulus(31225.942000, 28852.236400, 3442.440099, 6884.880198, X, Y) && !ellipse(27854.391800, 26114.158200, 2031.331258, 2031.331258, 0.000000, X, Y) && !ellipse(28293.109375, 25173.888031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28891.008698, 25677.334686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27335.498718, 24349.541260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29459.317719, 26253.452148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28029.028600, 23710.830100, 384.821611, 384.821611, 0.000000, X, Y) && !ellipse(27002.770000, 27872.770000, 429.348012, 429.348012, 0.000000, X, Y) && !ellipse(32642.008200, 34109.540200, 1747.472050, 1747.472050, 0.000000, X, Y) && !ellipse(32557.214000, 30030.308000, 1234.488036, 1234.488036, 0.000000, X, Y) && !ellipse(24999.845551, 23714.816681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38759.264069, 35267.234131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27726.582200, 29157.134000, 1580.304045, 1527.680044, 349.794456, X, Y) && !ellipse(25485.112000, 24172.984000, 1187.480034, 1187.480034, 0.000000, X, Y) && !ellipse(23771.900200, 22738.652500, 996.520029, 629.519218, 0.089625, X, Y) && !ellipse(23307.450000, 22385.768000, 2566.160074, 2566.160074, 0.000000, X, Y) && !ellipse(24138.896000, 23035.784000, 1283.080037, 1283.080037, 0.000000, X, Y) && !ellipse(30077.394000, 27878.004000, 1376.976040, 1376.976040, 0.000000, X, Y) && !ellipse(28305.540000, 23233.420000, 1231.944035, 1231.944035, 0.000000, X, Y) && !ellipse(29372.858000, 23437.954000, 1357.111147, 1357.111147, 0.000000, X, Y)
[Sat Jun 15 21:46:21 2013] Writing fullrun_mos2_xmm0134520301_pi300-10000_pass1_cl_src33.gif
[Sat Jun 15 21:52:35 2013] Mean detx,y = (107.53, 4318.99) 
[Sat Jun 15 21:52:37 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 21:53:51 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 21:53:51 2013] Setting source spectrum file to fullrun_mos2_xmm0134520301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat Jun 15 21:53:51 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0134520301_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sat Jun 15 23:34:43 2013] Updating aperture counts using extracted products
[Sat Jun 15 23:34:43 2013] Total counts from fullrun_mos2_xmm0134520301_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 373.00
[Sat Jun 15 23:34:43 2013] Total counts from fullrun_mos2_xmm0134520301_pi300-10000_pass1_cl_src33_bgd.pi.gz = 11034.00
[Sat Jun 15 23:34:43 2013] Got source and background scale factors 2077672.000000, 74593793.000000
[Sat Jun 15 23:34:43 2013] User source parameters:
  Position = (359.5, 332.2) = 5 28 17.61 -65 24 37.2
  Extent = 34.4 (33.6-68.8)" x 5.8 (4.9-6.7)", rotation angle = 140 (139-142) degrees
  Source aperture counts = 65.7 +/- 20.3
  Background aperture counts = 307.3
  Rate = 0.001 +/- 0.0004

[Sat Jun 15 23:34:46 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 23:34:46 2013] Using photon index=1.80, rate=0.00778, arf fullrun_mos2_xmm0134520301_pi300-10000_pass1_cl_src33.arf
[Sat Jun 15 23:34:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 23:34:46 2013] Updating source flux to 1e-13
[Sat Jun 15 23:35:02 2013] Flag c found in src. 33 procflags, skipping spectral fitting
[Sat Jun 15 23:35:20 2013] xmm0134520301/analysis//spectral/fullrun_mos2_xmm0134520301_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete