[Sat Jun 15 21:44:33 2013] Detection parameters:
  Position = (381.1, 348.4) = 5 28 2.57 -65 23 26.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.7 +/- 11.1
  Background counts = 20.9
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 21:44:34 2013] Off-axis axis estimate = 7.00'
[Sat Jun 15 21:45:03 2013] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:45:03 2013] Initial guess for spatial extent in simple fitting = 9.93"
[Sat Jun 15 21:45:03 2013] source mask rpix=2.3, npix_max = 30, mask sum = 22, frac = 0.710
[Sat Jun 15 21:45:03 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 9.93"
[Sat Jun 15 21:45:04 2013] fullrun_mos1_xmm0134520301_pi300-10000_cl_pass0_src28.ximg exists
[Sat Jun 15 21:45:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0134520301_pi300-10000_cl_pass0_src28.csv
[Sat Jun 15 21:45:04 2013] fullrun_mos1_xmm0134520301_pi300-10000_cl_pass0_src28_1.ximg exists
[Sat Jun 15 21:45:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0134520301_pi300-10000_cl_pass0_src28.csv
[Sat Jun 15 21:45:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0134520301_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0134520301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:45:04 2013] fullrun_mos1_xmm0134520301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sat Jun 15 21:45:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0134520301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sat Jun 15 21:45:04 2013] fullrun_mos1_xmm0134520301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sat Jun 15 21:45:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0134520301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sat Jun 15 21:45:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0134520301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0134520301_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:45:20 2013] Spatial fit model total counts = 307.056000, observed total counts = 276.000000
[Sat Jun 15 21:45:20 2013] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 21:45:20 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:45:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:45:20 2013] Assessing source extent using major
[Sat Jun 15 21:45:20 2013] Source does appear to be extended
[Sat Jun 15 21:45:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:45:20 2013] Deleting source due to low Poisson probability 0.9