[Sat Jun 15 21:44:32 2013] Detection parameters:
  Position = (342.5, 311.9) = 5 28 29.40 -65 26 5.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 235.6 +/- 27.0
  Background counts = 39.7
  Rate = 0.005 +/- 0.0006

[Sat Jun 15 21:44:34 2013] Off-axis axis estimate = 3.34'
[Sat Jun 15 21:45:03 2013] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:45:03 2013] Initial guess for spatial extent in simple fitting = 8.10"
[Sat Jun 15 21:45:03 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.896
[Sat Jun 15 21:45:03 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 8.10"
[Sat Jun 15 21:45:03 2013] fullrun_mos1_xmm0134520301_pi300-10000_cl_pass0_src7.ximg exists
[Sat Jun 15 21:45:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0134520301_pi300-10000_cl_pass0_src7.csv
[Sat Jun 15 21:45:03 2013] fullrun_mos1_xmm0134520301_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Jun 15 21:45:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0134520301_pi300-10000_cl_pass0_src7.csv
[Sat Jun 15 21:45:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0134520301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0134520301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:45:04 2013] fullrun_mos1_xmm0134520301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Jun 15 21:45:04 2013] fullrun_mos1_xmm0134520301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Jun 15 21:45:04 2013] Fit fullrun_mos1_xmm0134520301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sat Jun 15 21:45:20 2013] Warning, spatial fit 7 centroid is now closest to src. 32
[Sat Jun 15 21:45:20 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:45:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:45:20 2013] Assessing source extent using major
[Sat Jun 15 21:45:20 2013] Source does appear to be extended
[Sat Jun 15 21:45:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:45:40 2013] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:45:40 2013] Initial guess for spatial extent in simple fitting = 8.10"
[Sat Jun 15 21:45:40 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.896
[Sat Jun 15 21:45:40 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 8.10"
[Sat Jun 15 21:45:40 2013] fullrun_mos1_xmm0134520301_pi300-10000_cl_pass1_src6.ximg exists
[Sat Jun 15 21:45:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0134520301_pi300-10000_cl_pass1_src6.csv
[Sat Jun 15 21:45:40 2013] fullrun_mos1_xmm0134520301_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Jun 15 21:45:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0134520301_pi300-10000_cl_pass1_src6.csv
[Sat Jun 15 21:45:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0134520301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0134520301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:45:41 2013] fullrun_mos1_xmm0134520301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Jun 15 21:45:41 2013] fullrun_mos1_xmm0134520301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Jun 15 21:45:41 2013] Fit fullrun_mos1_xmm0134520301_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Jun 15 21:45:51 2013] Source 11 is offset by 7.963509 and 4.612687 pixels which is larger than
2 X fitted extent = 3.423287 x 3.423287, not incorporating fit results
[Sat Jun 15 21:45:51 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 28.301755 pixels away
[Sat Jun 15 21:45:51 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:45:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:45:51 2013] Assessing source extent using major
[Sat Jun 15 21:45:51 2013] Source does appear to be extended
[Sat Jun 15 21:45:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:46:15 2013] XMMSAS src. selection expression = ellipse(29750.375305, 27087.335785, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 21:46:15 2013] Not overwriting source region fullrun_mos1_xmm0134520301_pi300-10000_pass1_cl_src11_src.reg
[Sat Jun 15 21:46:15 2013] Extracting stamp from image fullrun_mos1_xmm0134520301_pi300-10000_cl_sm2.00.img.gz, (305, 274) - (380, 349)
[Sat Jun 15 21:46:15 2013] XMMSAS bgd. selection expression = annulus(29750.375305, 27087.335785, 1087.500000, 2175.000000, X, Y) && !ellipse(27858.029200, 26092.841400, 2353.780868, 2353.780868, 0.000000, X, Y) && !ellipse(29926.966614, 26424.685608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28376.616000, 27835.042600, 1265.768036, 275.551208, 286.338000, X, Y)
[Sat Jun 15 21:46:15 2013] Writing fullrun_mos1_xmm0134520301_pi300-10000_pass1_cl_src11.gif
[Sat Jun 15 21:46:17 2013] ../../xmm0134520301/products/events/fullrun_mos1_xmm0134520301_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0134520301/products/events/fullrun_mos1_xmm0134520301_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Sat Jun 15 21:46:17 2013] Mean detx,y = (2181.51, 166.51) 
[Sat Jun 15 21:46:17 2013] ../../xmm0134520301/products/images/fullrun_mos1_xmm0134520301_pi300-10000_pass1_cl_src11_src.img and ../../xmm0134520301/products/images/fullrun_mos1_xmm0134520301_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Sat Jun 15 21:46:17 2013] ../../xmm0134520301/products/spectra/fullrun_mos1_xmm0134520301_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0134520301/products/spectra/fullrun_mos1_xmm0134520301_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Sat Jun 15 21:46:17 2013] Setting source spectrum file to fullrun_mos1_xmm0134520301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jun 15 21:46:17 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0134520301_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Jun 15 21:46:17 2013] ../../xmm0134520301/products/lightcurves/fullrun_mos1_xmm0134520301_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0134520301/products/lightcurves/fullrun_mos1_xmm0134520301_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Sat Jun 15 21:46:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 21:46:21 2013] rmf not generated due to insufficient counts
[Sat Jun 15 21:46:21 2013] fullrun_mos1_xmm0134520301_pi300-10000_pass1_cl_src11.arf exists, delete to re-create
[Sat Jun 15 23:34:32 2013] Updating aperture counts using extracted products
[Sat Jun 15 23:34:32 2013] Total counts from fullrun_mos1_xmm0134520301_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 1587.00
[Sat Jun 15 23:34:32 2013] Total counts from fullrun_mos1_xmm0134520301_pi300-10000_pass1_cl_src11_bgd.pi.gz = 1540.00
[Sat Jun 15 23:34:32 2013] Got source and background scale factors 1273860.000000, 5612432.000000
[Sat Jun 15 23:34:32 2013] User source parameters:
  Position = (342.5, 311.9) = 5 28 29.40 -65 26 5.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1237.5 +/- 40.8
  Background aperture counts = 349.5
  Rate = 0.03 +/- 0.0008

[Sat Jun 15 23:34:32 2013] Updating counts from extracted products
[Sat Jun 15 23:34:32 2013] Set source signif. to 1237.46/18.70 = 66.19
[Sat Jun 15 23:34:36 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 23:34:36 2013] Using photon index=1.80, rate=0.0252, arf fullrun_mos1_xmm0134520301_pi300-10000_pass1_cl_src11.arf
[Sat Jun 15 23:34:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 23:34:36 2013] Updating source flux to 2.8e-13
[Sat Jun 15 23:34:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 23:35:02 2013] xmm0134520301/analysis//spectral/fullrun_mos1_xmm0134520301_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete