[Fri May 17 00:57:30 2013] Detection parameters:
  Position = (299.2, 272.1) = 16 57 49.45 35 20 16.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49593.0 +/- 271.6
  Background counts = 100.4
  Rate = 5 +/- 0.03

[Fri May 17 00:57:32 2013] Off-axis axis estimate = 1.91'
[Fri May 17 01:22:58 2013] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Fri May 17 01:22:58 2013] Initial guess for spatial extent in simple fitting = 7.38"
[Fri May 17 01:22:58 2013] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.777
[Fri May 17 01:22:58 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.38"
[Fri May 17 14:57:51 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_src2.ximg exists
[Fri May 17 14:57:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_src2.csv
[Fri May 17 14:57:51 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri May 17 14:57:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_src2.csv
[Fri May 17 14:57:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 14:57:52 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri May 17 14:57:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May 17 14:57:52 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri May 17 14:57:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May 17 14:57:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 14:58:04 2013] Spatial fit model total counts = 218412.000000, observed total counts = 143808.000000
[Fri May 17 14:58:04 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 17 14:58:05 2013] Vigneting correction estimate = 1.000000
[Fri May 17 14:58:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 14:58:05 2013] Assessing source extent using major
[Fri May 17 14:58:05 2013] Source does appear to be extended
[Fri May 17 14:58:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 14:58:05 2013] Source is confused with source 5
[Fri May 17 15:20:48 2013] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Fri May 17 15:20:48 2013] Initial guess for spatial extent in simple fitting = 7.38"
[Fri May 17 15:20:48 2013] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.777
[Fri May 17 15:20:48 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.38"
[Fri May 17 19:12:35 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_src2.ximg exists
[Fri May 17 19:12:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_src2.csv
[Fri May 17 19:12:35 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri May 17 19:12:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_src2.csv
[Fri May 17 19:12:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 19:12:36 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri May 17 19:12:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri May 17 19:12:36 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri May 17 19:12:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri May 17 19:12:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 19:12:46 2013] Spatial fit model total counts = 178018.000000, observed total counts = 143808.000000
[Fri May 17 19:12:46 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 17 19:12:46 2013] Vigneting correction estimate = 1.000000
[Fri May 17 19:12:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 19:12:46 2013] Assessing source extent using major
[Fri May 17 19:12:46 2013] Source does appear to be extended
[Fri May 17 19:12:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 19:21:07 2013] Counts = 49593.031250, rescaling region sizes by 3.000000
[Fri May 17 19:21:07 2013] XMMSAS src. selection expression = ellipse(25977.899933, 23628.549469, 1957.500000, 1957.500000, 0.000000, X, Y)
[Fri May 17 19:21:07 2013] Writing source region out to fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src3_src.reg
[Fri May 17 19:21:07 2013] Extracting stamp from image fullrun_mos2_xmm0134120101_pi300-10000_cl_sm2.00.img.gz, (187, 160) - (412, 385)
[Fri May 17 19:21:07 2013] XMMSAS bgd. selection expression = annulus(25977.899933, 23628.549469, 9787.500000, 19575.000000, X, Y) && !ellipse(25348.036000, 24469.636000, 2237.016064, 1010.168029, 241.246000, X, Y) && !ellipse(25474.444000, 24060.796200, 3459.456100, 3459.456100, 0.000000, X, Y) && !ellipse(25202.854401, 23514.683228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26067.323975, 22459.832123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27804.570709, 25006.501709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24197.546143, 24956.191559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23822.857788, 25502.408081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24708.894000, 25565.068000, 1146.864033, 1146.864033, 0.000000, X, Y) && !ellipse(27702.238000, 24092.122000, 1222.520035, 314.961609, 172.141000, X, Y) && !ellipse(23198.055054, 27452.362488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29194.067017, 19798.409515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27788.815765, 26294.020996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28690.914800, 20426.071200, 1871.496054, 430.871212, 52.088500, X, Y) && !ellipse(27986.348000, 21326.630000, 1334.464038, 581.948817, 47.965900, X, Y) && !ellipse(22195.120800, 28478.392400, 1336.912038, 457.828813, 50.782191, X, Y) && !ellipse(27394.594360, 22065.683731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23561.782000, 26001.208000, 1170.776034, 1170.776034, 0.000000, X, Y) && !ellipse(24367.608734, 26749.539062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28117.797791, 22079.181900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28945.035889, 24644.249512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29431.137238, 24816.136108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35521.134583, 23783.228821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32338.317800, 15878.080000, 2124.184061, 336.643210, 50.995400, X, Y) && !ellipse(21492.694000, 25318.386000, 1287.608037, 1287.608037, 0.000000, X, Y) && !ellipse(32451.874200, 15747.619000, 1839.496053, 336.722410, 50.664900, X, Y) && !ellipse(20907.338000, 27176.256800, 1342.432039, 1342.432039, 0.000000, X, Y) && !ellipse(34544.754200, 13190.282640, 2328.352067, 291.044008, 51.213000, X, Y) && !ellipse(30064.656000, 26387.552000, 1285.024037, 1285.024037, 0.000000, X, Y) && !ellipse(34397.416800, 13366.839400, 2379.800068, 321.474409, 50.081500, X, Y) && !ellipse(35525.929600, 11955.354600, 2163.488062, 277.944008, 51.206500, X, Y) && !ellipse(33896.622000, 13940.856000, 1942.824056, 1363.032039, 238.902000, X, Y)
[Fri May 17 19:21:07 2013] Writing fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src3.gif
[Fri May 17 19:32:02 2013] Mean detx,y = (-79.72, -97.79) 
[Fri May 17 19:32:04 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 19:42:10 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 19:42:11 2013] Setting source spectrum file to fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 17 19:42:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri May 17 20:16:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 17 20:16:28 2013] rmf not generated due to insufficient counts
[Fri May 17 21:24:57 2013] Updating aperture counts using extracted products
[Fri May 17 21:24:57 2013] Total counts from fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 244412.00
[Fri May 17 21:24:57 2013] Total counts from fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 23280.00
[Fri May 17 21:24:57 2013] Got source and background scale factors 11427320.000000, 556442646.000000
[Fri May 17 21:24:57 2013] User source parameters:
  Position = (299.2, 272.1) = 16 57 49.45 35 20 16.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 243933.9 +/- 495.4
  Background aperture counts = 478.1
  Rate = 3e+01 +/- 0.05

[Fri May 17 21:24:57 2013] Updating counts from extracted products
[Fri May 17 21:24:57 2013] Set source signif. to 243933.91/21.87 = 11156.26
[Fri May 17 21:25:01 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 21:25:01 2013] Using photon index=1.80, rate=26.2, arf fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src3.arf
[Fri May 17 21:25:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 21:25:01 2013] Updating source flux to 2.4e-10
[Fri May 17 21:25:03 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 21:25:14 2013] xmm0134120101/analysis//spectral/fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete