[Fri May 17 00:57:31 2013] Detection parameters:
  Position = (267.2, 316.1) = 16 58 0.82 35 23 32.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 349.2 +/- 26.7
  Background counts = 66.7
  Rate = 0.04 +/- 0.003

[Fri May 17 00:57:32 2013] Off-axis axis estimate = 2.60'
[Fri May 17 01:22:58 2013] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Fri May 17 01:22:58 2013] Initial guess for spatial extent in simple fitting = 7.73"
[Fri May 17 01:22:58 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.772
[Fri May 17 01:22:58 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 7.73"
[Fri May 17 14:57:51 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_src11.ximg exists
[Fri May 17 14:57:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_src11.csv
[Fri May 17 14:57:51 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri May 17 14:57:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_src11.csv
[Fri May 17 14:57:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 14:57:52 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri May 17 14:57:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri May 17 14:57:52 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri May 17 14:57:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri May 17 14:57:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 14:58:04 2013] Spatial fit model total counts = 1557.440000, observed total counts = 1414.000000
[Fri May 17 14:58:04 2013] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 17 14:58:04 2013] Source 15 is offset by 5.366334 and 7.119201 pixels which is larger than
2 X fitted extent = 6.997977 x 6.997977, not incorporating fit results
[Fri May 17 14:58:05 2013] Vigneting correction estimate = 1.000000
[Fri May 17 14:58:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 14:58:05 2013] Assessing source extent using major
[Fri May 17 14:58:05 2013] Source does appear to be extended
[Fri May 17 14:58:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 15:20:48 2013] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Fri May 17 15:20:48 2013] Initial guess for spatial extent in simple fitting = 7.73"
[Fri May 17 15:20:48 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.772
[Fri May 17 15:20:48 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 7.73"
[Fri May 17 19:12:36 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_src11.ximg exists
[Fri May 17 19:12:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_src11.csv
[Fri May 17 19:12:36 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri May 17 19:12:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_src11.csv
[Fri May 17 19:12:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 19:12:36 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri May 17 19:12:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri May 17 19:12:36 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri May 17 19:12:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri May 17 19:12:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 19:12:46 2013] Spatial fit model total counts = 1563.030000, observed total counts = 1414.000000
[Fri May 17 19:12:46 2013] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 17 19:12:46 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 26.547007 pixels away
[Fri May 17 19:12:46 2013] Source 15 is offset by -1.733188 and 4.660213 pixels which is larger than
2 X fitted extent = 1.769338 x 1.769338, not incorporating fit results
[Fri May 17 19:12:46 2013] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 34.576992 pixels away
[Fri May 17 19:12:46 2013] Vigneting correction estimate = 1.000000
[Fri May 17 19:12:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 19:12:46 2013] Assessing source extent using major
[Fri May 17 19:12:46 2013] Source does appear to be extended
[Fri May 17 19:12:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 19:21:08 2013] XMMSAS src. selection expression = ellipse(23198.055054, 27452.362488, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 19:21:08 2013] Writing source region out to fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src15_src.reg
[Fri May 17 19:21:08 2013] Extracting stamp from image fullrun_mos2_xmm0134120101_pi300-10000_cl_sm2.00.img.gz, (230, 279) - (305, 354)
[Fri May 17 19:21:08 2013] XMMSAS bgd. selection expression = annulus(23198.055054, 27452.362488, 1087.500000, 2175.000000, X, Y) && !ellipse(25348.036000, 24469.636000, 2237.016064, 1010.168029, 241.246000, X, Y) && !ellipse(25977.899933, 23628.549469, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25474.444000, 24060.796200, 3459.456100, 3459.456100, 0.000000, X, Y) && !ellipse(24197.546143, 24956.191559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23822.857788, 25502.408081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24708.894000, 25565.068000, 1146.864033, 1146.864033, 0.000000, X, Y) && !ellipse(22195.120800, 28478.392400, 1336.912038, 457.828813, 50.782191, X, Y) && !ellipse(23561.782000, 26001.208000, 1170.776034, 1170.776034, 0.000000, X, Y) && !ellipse(24367.608734, 26749.539062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21492.694000, 25318.386000, 1287.608037, 1287.608037, 0.000000, X, Y) && !ellipse(20907.338000, 27176.256800, 1342.432039, 1342.432039, 0.000000, X, Y)
[Fri May 17 19:21:08 2013] Writing fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src15.gif
[Fri May 17 19:59:25 2013] Mean detx,y = (17.07, -4511.91) 
[Fri May 17 19:59:26 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 19:59:38 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 19:59:38 2013] Setting source spectrum file to fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri May 17 19:59:38 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Fri May 17 20:38:50 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 17 20:38:50 2013] rmf not generated due to insufficient counts
[Fri May 17 21:24:58 2013] Updating aperture counts using extracted products
[Fri May 17 21:24:58 2013] Total counts from fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 1094.00
[Fri May 17 21:24:58 2013] Total counts from fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src15_bgd.pi.gz = 913.00
[Fri May 17 21:24:58 2013] Got source and background scale factors 1280676.000000, 3349313.000000
[Fri May 17 21:24:58 2013] User source parameters:
  Position = (267.2, 316.1) = 16 58 0.82 35 23 32.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 744.9 +/- 34.1
  Background aperture counts = 349.1
  Rate = 0.08 +/- 0.004

[Fri May 17 21:24:58 2013] Updating counts from extracted products
[Fri May 17 21:24:58 2013] Set source signif. to 744.90/18.68 = 39.87
[Fri May 17 21:25:01 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 21:25:01 2013] Using photon index=1.80, rate=0.0801, arf fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src15.arf
[Fri May 17 21:25:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 21:25:01 2013] Updating source flux to 8.3e-13
[Fri May 17 21:25:03 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 21:25:14 2013] xmm0134120101/analysis//spectral/fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete