[Fri May 17 00:57:31 2013] Detection parameters:
  Position = (327.2, 239.1) = 16 57 39.47 35 17 54.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 238.7 +/- 21.5
  Background counts = 42.5
  Rate = 0.03 +/- 0.003

[Fri May 17 00:57:32 2013] Off-axis axis estimate = 4.78'
[Fri May 17 01:22:58 2013] Using EEF radius (= 8.82 ")to estimate initial spatial extent for simple fitting
[Fri May 17 01:22:58 2013] Initial guess for spatial extent in simple fitting = 8.82"
[Fri May 17 01:22:58 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.978
[Fri May 17 01:22:58 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 8.82"
[Fri May 17 14:57:51 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_src14.ximg exists
[Fri May 17 14:57:51 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri May 17 14:57:51 2013] Fit fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_src14 appears to have run properly
[Fri May 17 14:57:52 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri May 17 14:57:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri May 17 14:57:52 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri May 17 14:57:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri May 17 14:57:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134120101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 14:58:04 2013] Spatial fit model total counts = 930.548000, observed total counts = 851.000000
[Fri May 17 14:58:04 2013] Offset between fit and detection position for source 13 = 3.087372 pixels
[Fri May 17 14:58:04 2013] 930.319000 total counts/ 565.835000 bgd. counts: snr = 15.322639
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 3.087372 pixels
  Position = (329.4, 236.8) = 16 57 38.72 35 17 45.3
  Extent = 17.6 (17.6-35.3)" x 5.8 (4.9-7.2)", rotation angle = 50 (46-53) degrees
  Source counts = 364.5 +/- 30.5
  Background counts = 565.8
  Rate = 0.04 +/- 0.003
[Fri May 17 14:58:05 2013] Vigneting correction estimate = 1.000000
[Fri May 17 14:58:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 14:58:05 2013] Assessing source extent using major axis lower bound
[Fri May 17 14:58:05 2013] Source does appear to be extended
[Fri May 17 14:58:05 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.46
[Fri May 17 14:58:05 2013] Source is asymmetric
[Fri May 17 14:58:05 2013] Source is confused with source 14
[Fri May 17 15:20:48 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 17 15:20:48 2013] Initial guess for spatial extent in simple fitting = 11.70"
[Fri May 17 15:20:48 2013] source mask rpix=2.7, npix_max = 40, mask sum = 39, frac = 0.959
[Fri May 17 15:20:48 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 11.70"
[Fri May 17 19:12:36 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_src14.ximg exists
[Fri May 17 19:12:36 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri May 17 19:12:36 2013] Fit fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_src14 appears to have run properly
[Fri May 17 19:12:37 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri May 17 19:12:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Fri May 17 19:12:37 2013] fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri May 17 19:12:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Fri May 17 19:12:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0134120101_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 19:12:46 2013] Spatial fit model total counts = 900.476000, observed total counts = 844.000000
[Fri May 17 19:12:46 2013] Offset between fit and detection position for source 13 = 1.780582 pixels
[Fri May 17 19:12:46 2013] 905.455000 total counts/ 464.258000 bgd. counts: snr = 20.476365
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.780582 pixels
  Position = (330.3, 235.3) = 16 57 38.38 35 17 38.8
  Extent = 23.4 (23.4-46.8)" x 5.4 (4.6-6.3)", rotation angle = 52 (50-54) degrees
  Source counts = 441.2 +/- 30.1
  Background counts = 464.3
  Rate = 0.05 +/- 0.003
[Fri May 17 19:12:46 2013] Vigneting correction estimate = 1.000000
[Fri May 17 19:12:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 19:12:46 2013] Assessing source extent using major axis lower bound
[Fri May 17 19:12:46 2013] Source does appear to be extended
[Fri May 17 19:12:46 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.70
[Fri May 17 19:12:46 2013] Source is asymmetric
[Fri May 17 19:21:08 2013] XMMSAS src. selection expression = ellipse(28690.914800, 20426.071200, 1403.622040, 323.153409, 52.088500, X, Y)
[Fri May 17 19:21:08 2013] Writing source region out to fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src13_src.reg
[Fri May 17 19:21:08 2013] Extracting stamp from image fullrun_mos2_xmm0134120101_pi300-10000_cl_sm2.00.img.gz, (250, 155) - (411, 316)
[Fri May 17 19:21:08 2013] XMMSAS bgd. selection expression = annulus(28690.914800, 20426.071200, 2339.370067, 4678.740135, X, Y) && !ellipse(25348.036000, 24469.636000, 2237.016064, 1010.168029, 241.246000, X, Y) && !ellipse(25977.899933, 23628.549469, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25474.444000, 24060.796200, 3459.456100, 3459.456100, 0.000000, X, Y) && !ellipse(25202.854401, 23514.683228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26067.323975, 22459.832123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27804.570709, 25006.501709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24197.546143, 24956.191559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23822.857788, 25502.408081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24708.894000, 25565.068000, 1146.864033, 1146.864033, 0.000000, X, Y) && !ellipse(27702.238000, 24092.122000, 1222.520035, 314.961609, 172.141000, X, Y) && !ellipse(29194.067017, 19798.409515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27986.348000, 21326.630000, 1334.464038, 581.948817, 47.965900, X, Y) && !ellipse(27394.594360, 22065.683731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23561.782000, 26001.208000, 1170.776034, 1170.776034, 0.000000, X, Y) && !ellipse(28117.797791, 22079.181900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28945.035889, 24644.249512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29431.137238, 24816.136108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32338.317800, 15878.080000, 2124.184061, 336.643210, 50.995400, X, Y) && !ellipse(32451.874200, 15747.619000, 1839.496053, 336.722410, 50.664900, X, Y) && !ellipse(30064.656000, 26387.552000, 1285.024037, 1285.024037, 0.000000, X, Y) && !ellipse(33896.622000, 13940.856000, 1942.824056, 1363.032039, 238.902000, X, Y)
[Fri May 17 19:21:08 2013] Writing fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src13.gif
[Fri May 17 20:00:32 2013] Mean detx,y = (-72.32, 4368.04) 
[Fri May 17 20:00:33 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 20:01:32 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 20:01:32 2013] Setting source spectrum file to fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri May 17 20:01:32 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri May 17 21:24:58 2013] Updating aperture counts using extracted products
[Fri May 17 21:24:58 2013] Total counts from fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 423.00
[Fri May 17 21:24:58 2013] Total counts from fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src13_bgd.pi.gz = 4055.00
[Fri May 17 21:24:58 2013] Got source and background scale factors 1300540.000000, 34520215.000000
[Fri May 17 21:24:58 2013] User source parameters:
  Position = (330.3, 235.3) = 16 57 38.38 35 17 38.8
  Extent = 23.4 (23.4-46.8)" x 5.4 (4.6-6.3)", rotation angle = 52 (50-54) degrees
  Source aperture counts = 270.2 +/- 21.6
  Background aperture counts = 152.8
  Rate = 0.03 +/- 0.002

[Fri May 17 21:25:01 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 21:25:01 2013] Using photon index=1.80, rate=0.0474, arf fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src13.arf
[Fri May 17 21:25:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 21:25:01 2013] Updating source flux to 6.4e-13
[Fri May 17 21:25:03 2013] Flag c found in src. 13 procflags, skipping spectral fitting
[Fri May 17 21:25:14 2013] xmm0134120101/analysis//spectral/fullrun_mos2_xmm0134120101_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete