[Mon Jun  4 04:44:55 2012] Detection parameters:
  Position = (287.1, 313.9) = 5 59 51.92 -50 23 54.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.9 +/- 18.4
  Background counts = 23.6
  Rate = 0.02 +/- 0.003

[Mon Jun  4 04:44:55 2012] Off-axis axis estimate = 1.39'
[Mon Jun  4 04:48:23 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 04:48:23 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Mon Jun  4 04:48:23 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.875
[Mon Jun  4 04:48:23 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.12"
[Mon Jun  4 04:58:26 2012] fullrun_pn_xmm0129360201_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun  4 04:58:26 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0129360201_pi300-10000_cl_pass0_src3.csv
[Mon Jun  4 04:58:26 2012] fullrun_pn_xmm0129360201_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun  4 04:58:26 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0129360201_pi300-10000_cl_pass0_src3.csv
[Mon Jun  4 04:58:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0129360201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0129360201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 04:58:26 2012] fullrun_pn_xmm0129360201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun  4 04:58:26 2012] fullrun_pn_xmm0129360201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun  4 04:58:26 2012] Fit fullrun_pn_xmm0129360201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Jun  4 05:46:36 2012] Spatial fit model total counts = 747.121000, observed total counts = 747.000000
[Mon Jun  4 05:46:36 2012] Offset between fit and detection position for source 3 = 3.866507 pixels
[Mon Jun  4 05:46:36 2012] 726.048000 total counts/ 527.468000 bgd. counts: snr = 8.646442
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.866507 pixels
  Position = (285.7, 317.5) = 5 59 52.56 -50 23 41.7
  Extent = 11.7 (9.0-14.2)", rotation angle = 0
  Source counts = 198.6 +/- 26.9
  Background counts = 527.5
  Rate = 0.02 +/- 0.003
[Mon Jun  4 05:46:36 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 05:46:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 05:46:36 2012] Assessing source extent using major axis lower bound
[Mon Jun  4 05:46:36 2012] Source does appear to be extended
[Mon Jun  4 05:46:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 05:46:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun  4 05:46:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun  4 05:46:45 2012] Initial guess for spatial extent in simple fitting = 11.74"
[Mon Jun  4 05:46:45 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.026
[Mon Jun  4 05:46:45 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.74"
[Mon Jun  4 06:02:54 2012] fullrun_pn_xmm0129360201_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jun  4 06:02:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129360201_pi300-10000_cl_pass1_src3.csv
[Mon Jun  4 06:02:54 2012] fullrun_pn_xmm0129360201_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jun  4 06:02:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0129360201_pi300-10000_cl_pass1_src3.csv
[Mon Jun  4 06:02:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0129360201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0129360201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  4 06:02:54 2012] fullrun_pn_xmm0129360201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jun  4 06:02:54 2012] fullrun_pn_xmm0129360201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jun  4 06:02:54 2012] Fit fullrun_pn_xmm0129360201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jun  4 06:19:32 2012] Warning, spatial fit 3 centroid is now closest to src. 13
[Mon Jun  4 06:19:32 2012] Source 3 in spatial fitting is no longer close to this source
[Mon Jun  4 06:19:32 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 06:19:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 06:19:32 2012] Assessing source extent using major axis lower bound
[Mon Jun  4 06:19:32 2012] Source does appear to be extended
[Mon Jun  4 06:19:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 06:19:32 2012] Source is confused with source 2
[Mon Jun  4 06:19:37 2012] XMMSAS src. selection expression = ellipse(24807.830800, 27574.824000, 704.292020, 704.292020, 0.000000, X, Y)
[Mon Jun  4 06:19:37 2012] Writing source region out to fullrun_pn_xmm0129360201_pi300-10000_pass1_cl_src3_src.reg
[Mon Jun  4 06:19:37 2012] Extracting stamp from image fullrun_pn_xmm0129360201_pi300-10000_cl_sm2.00.img.gz, (245, 277) - (326, 358)
[Mon Jun  4 06:19:37 2012] XMMSAS bgd. selection expression = annulus(24807.830800, 27574.824000, 1173.820034, 2347.640068, X, Y) && !ellipse(24969.238400, 27079.501800, 1111.896032, 430.758412, 72.513000, X, Y) && !ellipse(25397.239000, 25432.298000, 1073.600031, 1073.600031, 0.000000, X, Y)
[Mon Jun  4 06:19:37 2012] Writing fullrun_pn_xmm0129360201_pi300-10000_pass1_cl_src3.gif
[Mon Jun  4 06:26:28 2012] Mean detx,y = (-395.86, 3314.05) 
[Mon Jun  4 06:26:32 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  4 06:26:47 2012] Binned source spectrum to 10 counts/bin
[Mon Jun  4 06:26:48 2012] Setting source spectrum file to fullrun_pn_xmm0129360201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun  4 06:26:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0129360201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jun  4 07:30:00 2012] Updating aperture counts using extracted products
[Mon Jun  4 07:30:00 2012] Error reading totcts from fullrun_pn_xmm0129360201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun  4 07:30:00 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 07:30:00 2012] Using photon index=1.80, rate=0.0186, arf fullrun_pn_xmm0129360201_pi300-10000_pass1_cl_src3.arf
[Mon Jun  4 07:30:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 07:30:00 2012] Updating source flux to 5.3e-14
[Mon Jun  4 07:30:27 2012] Flag c found in src. 3 procflags, skipping spectral fitting